Awad B.S. Alquaity, Salem A. Al‐Dini and Bekir S. Yilbas
Heat capacity enhancement is important for variety of applications, including microchannel cooling and solar thermal energy conversion. A promising method to enhance heat capacity…
Abstract
Purpose
Heat capacity enhancement is important for variety of applications, including microchannel cooling and solar thermal energy conversion. A promising method to enhance heat capacity of a fluid is by introducing phase change particles in a flow system. The purpose of this paper is to investigate heat capacity enhancement in a microchannel flow with the presence of phase change material (PCM) particles.
Design/methodology/approach
Discrete phase model (DPM) and homogeneous model have been compared in this study. Water is used as the carrier fluid and lauric acid as the PCM particles with different volume concentrations, ranging from 0 to 10%. Both the models neglect the particle‐particle interaction effects of PCM particles.
Findings
The DPM indicates that presence of 10% volume concentration of PCM particles does not cause an increase in the pressure drop along the channel length. However, prediction from the homogeneous model shows an increase in the pressure drop due to the addition of nanoparticles in such a way that 10% volume concentration of particles causes 34.4% increase in pressure drop.
Research limitations/implications
The study covers only 10% volume concentration of PCM particles; however, the model may be modified to include higher volume concentrations. The laminar flow is considered; it may be extended to study the turbulence effects.
Practical implications
This work provides a starting framework for the practical use of different PCM particles, carrier fluid properties, and different particle volume concentrations in electronic cooling applications.
Originality/value
The work presented is original and the findings will be very useful for researchers and engineers working in microchannel flow in cooling and thermal storage applications.
Details
Keywords
M.A. Antar, Rached Ben-Mansour and Salem Ahmed Al-Dini
There are industrial applications for varying speed lid-driven flow and heat transfer such as the float glass process where the glass film stretches or thickens depending on the…
Abstract
Purpose
There are industrial applications for varying speed lid-driven flow and heat transfer such as the float glass process where the glass film stretches or thickens depending on the desired thickness. Hence the tin cavity underneath or the nitrogen cavity above is being driven by a variable speed. The purpose of this paper is to simulate such behavior.
Design/methodology/approach
Numerical solution of variable speed lid-driven cavity is carried out with thermal radiation being considered using control volume approach and staggered grid and applying the SIMPLE algorithm. Transient simulation is used for 2D model in the present study. Second order upwind schemes were used for discretization of momentum, energy equations and time.
Findings
Under laminar conditions, thermal radiation plays a significant role in the heat transfer characteristics of the lid-driven cavity. This effect is more significant for blackbody radiation and decreases as the surface emissivity decreases. Nusselt number (Nu) behavior lies between these two limiting case profiles considering constant speed profiles of both maximum and minimum lid velocities, respectively. In addition, local Nu values at the tip where higher than those at the top of the cavity that is stagnant.
Research limitations/implications
The study is limited to laminar flow case.
Practical implications
The applications of this study can be found in float glass process where the glass film stretches or thickens depending on the desired thickness. Hence the tin cavity underneath or the nitrogen cavity above is being driven by a variable speed. Another application involves casting of plastic films. The molten polymer leaves the die with a considerable thickness and high temperature. The film is then trenched to reach its final thickness. In this case, usually there is no actual cavity above or below the film but one can approximate the problem as such. Other similar applications do exist in food drying and processing where the conveyer belt is in portions and their speed may not be the same in different section of the processing oven.
Originality/value
To the best of the authors knowledge, no study in the literature addressed the effect of thermal radiation in lid-driven cavities with variable speed
Details
Keywords
The purpose of this paper is to address various works on mixed convection and proposes 10 unified models (Models 1–10) based on various thermal and kinematic conditions of the…
Abstract
Purpose
The purpose of this paper is to address various works on mixed convection and proposes 10 unified models (Models 1–10) based on various thermal and kinematic conditions of the boundary walls, thermal conditions and/ or kinematics of objects embedded in the cavities and kinematics of external flow field through the ventilation ports. Experimental works on mixed convection have also been addressed.
Design/methodology/approach
This review is based on 10 unified models on mixed convection within cavities. Models 1–5 involve mixed convection based on the movement of single or double walls subjected to various temperature boundary conditions. Model 6 elucidates mixed convection due to the movement of single or double walls of cavities containing discrete heaters at the stationary wall(s). Model 7A focuses mixed convection based on the movement of wall(s) for cavities containing stationary solid obstacles (hot or cold or adiabatic) whereas Model 7B elucidates mixed convection based on the rotation of solid cylinders (hot or conductive or adiabatic) within the cavities enclosed by stationary or moving wall(s). Model 8 is based on mixed convection due to the flow of air through ventilation ports of cavities (with or without adiabatic baffles) subjected to hot and adiabatic walls. Models 9 and 10 elucidate mixed convection due to flow of air through ventilation ports of cavities involving discrete heaters and/or solid obstacles (conductive or hot) at various locations within cavities.
Findings
Mixed convection plays an important role for various processes based on convection pattern and heat transfer rate. An important dimensionless number, Richardson number (Ri) identifies various convection regimes (forced, mixed and natural convection). Generalized models also depict the role of “aiding” and “opposing” flow and combination of both on mixed convection processes. Aiding flow (interaction of buoyancy and inertial forces in the same direction) may result in the augmentation of the heat transfer rate whereas opposing flow (interaction of buoyancy and inertial forces in the opposite directions) may result in decrease of the heat transfer rate. Works involving fluid media, porous media and nanofluids (with magnetohydrodynamics) have been highlighted. Various numerical and experimental works on mixed convection have been elucidated. Flow and thermal maps associated with the heat transfer rate for a few representative cases of unified models [Models 1–10] have been elucidated involving specific dimensionless numbers.
Originality/value
This review paper will provide guidelines for optimal design/operation involving mixed convection processing applications.