Search results

The purpose of this paper is to introduce and analyze a dual-side-permanent-magnet Halbach array vernier (DSPMHV) machine and to propose methods for achieving high torque density.

Flux harmonics and torque characteristics are analyzed by using finite element analysis. First, a suitable pole-slot combination is selected by comparison. Second, field modulation processes of DSPMHV machine are analyzed to identify the reason for high torque density. And it is compared with dual-side-PM (DSPM) machine to analyze flux harmonic and verify the flux concentrating effect of the Halbach array.

The permanent magnet (PM) field of the DSPM machine is approximately equal to the superposition of stator-PM field and rotor-PM field, which is the reason for high torque density. And the Halbach array can reduce flux leakage and increase the amplitude of main flux harmonics, then further improves torque. Improvement of torque can be achieved by choosing right pole-slot combination, adopting DSPM machine structure, reducing flux leakage and adopting field modulation principle.

The DSPMHV machine with split-tooth is proposed in this paper by combining the Halbach array with DSPM structure. This paper analyzes the bidirectional field modulation process, the reason for high torque density of the DSPM machine is obtained. Comparison with the DSPM machine verifies the flux concentrating effect of Halbach array. To alleviate the magnetic saturation in part of stator teeth, this paper proposes an improved DSPMHV machine with shaped auxiliary magnet.

The purpose of this paper is to examine the initial mixing of wastewater discharged from submerged outfall diffusers and the influence of port configurations on wastewater distribution based on computational results.

Marine wastewater discharges from multiport diffusers are investigated by numerically solving three-dimensional and uncompressible two-phase flow fields. A mixture model simulates this flow and the standard k-e model to resolve flow turbulence; inter-phase interactions were described in terms of relative slip velocity between phases. Computations were performed for two values of the port spacings s/H with different current Froude numbers F.

Computational results compared well with previous laboratory measurements. Numerical results reveal that for both the closely spaced (s/H=0.21) and widely spaced (s/H=3.0) ports, the normalized dilution Sn becomes independent of F; further, the length of the near field xn and the spreading layer thickness hn are functions of F. For the closely spaced ports, the wastewater discharge behaves like a line plume, the Coanda effect is obvious, quasi-bifurcation is present, horseshoe structures of the jets in the planes are rapidly produced and then squashed and elongated, and the jet trajectories based on maximum velocity precede those based on maximum concentration. For the widely spaced ports, the wastewater discharge behaves like a point plume, the Coanda effect is not obvious, bifurcation is present, horseshoe structures of the jets in the planes are gradually produced and become ellipses, and the jet trajectories based on maximum velocity are similar to those based on maximum concentration.

Semi-empirical equations are presented to predict major near field characteristics. These provide guidance for designing multiport diffusers and assessing environmental impact.

This study aims to expose the flow phenomena and entropy generation during a; magnetohydrodynamic (MHD) Poiseuille flow of water-based nanofluids (NFs) in a porous channel subject to hydrodynamic slip and convective heating boundary conditions. The flow caused by the uniform pressure; gradient between infinite parallel plates is considered steady and fully developed. The nanoparticles; namely, copper, alumina and titanium oxide are taken with pure water as the base fluid. Viscous dissipation and Joule heating impacts are also incorporated in this investigation.

The reduced governing equations are solved analytically in closed form. The physical insights of noteworthy parameters on the important flow quantities are demonstrated through graphs and analyzed elaborately. The thermodynamic analysis is performed by calculating entropy generation; rate and Bejan number. A graphical comparison between solutions corresponding to NFs and regular fluid in the channel is also provided.

The analysis of the results divulges that entropy generation minimization can be achieved by an appropriate combination of the geometrical and physical parameters of thermomechanical systems. It is reported that ascent in magnetic parameter number declines the velocity profiles, while the inverse pattern is witnessed with augmentation in hydrodynamic slip parameters. The temperature dissemination declines with the growth of Biot numbers. It is perceived that the entropy generation rate lessens with an upgrade in magnetic parameter, whereas the reverse trend of Bejan number is perceived with expansion in magnetic parameter and Biot number. The important contribution of the result is that the entropy generation rate is controlled with an appropriate composition of thermo-physical parameter values. Moreover, in the presence of a magnetic field and suction/injection at the channel walls, the shear stresses at the channel walls are reduced about two times.

In various industrial applications, minimizing entropy generation plays a significant role. Miniaturization of entropy is the utilization of the energy of thermal devices such as micro heat exchangers, micromixers, micropumps and cooling microelectromechanical devices.

An attentive review of the literature discloses that quite a few studies have been conducted on entropy generation analysis of a fully developed MHD Poiseuille flow of NFs through a permeable channel subject to the velocity slip and convective heating conditions at the walls.

This study explores the subject of goal congruence in the university by comparing faculty members and students from three academic programs: medicine, social sciences and engineering. The major findings of this study are: 1) all six groups scored higher for goal congruence on support goals than on output goals; 2) engineering student scores were the most incongruent with the current state of university goals, while medical student scores were the most congruent; and 3) the overall score for goal incongruence was medium. The implications of the findings are discussed.

The purpose of this study is to review the existing fatigue and vibration-based structural health monitoring techniques and highlight the advantages of combining both approaches.

Fatigue monitoring requires a fatigue model of the material, the stresses at specific points of the structure, a cycle counting technique and a fatigue damage criterion. Firstly, this paper reviews existing structural health monitoring (SHM) techniques, addresses their principal classifications and presents the main characteristics of each technique, with a particular emphasis on modal-based methodologies. Automated modal analysis, damage detection and localisation techniques are also reviewed. Fatigue monitoring is an SHM technique which evaluate the structural fatigue damage in real time. Stress estimation techniques and damage accumulation models based on the S-N field and the Miner rule are also reviewed in this paper.

A vast amount of research has been carried out in the field of SHM. The literature about fatigue calculation, fatigue testing, fatigue modelling and remaining fatigue life is also extensive. However, the number of publications related to monitor the fatigue process is scarce. A methodology to perform real-time structural fatigue monitoring, in both time and frequency domains, is presented.

Fatigue monitoring can be combined (applied simultaneously) with other vibration-based SHM techniques, which might significantly increase the reliability of the monitoring techniques.

The suitability of a coupled scheme based on parabolic/elliptic Navier‐Stokes equations for calculating film cooling flows and heat transfer downstream of flush, angled injection slots is explored. The coupled algorithm that combined the coarse mesh ‘outer’ Navier‐Stokes and fine grid ‘inner’ parabolic Navier‐Stokes codes makes retention of the current high resolution model desirable because an acceptable accuracy and economy of computation time are attainable using only mini‐computer resources. The ‘inner‐code’ includes the FLARE approximation to permit small reverse flow. The inner and outer codes are coupled by adopting an approach analogous to classical multigrid methods. It is found that for high blowing mass flow rate of 1.0 with the case of greater than 40° injection angle, the fully parabolic procedure is unable to cope with an extensive separation region immediately downstream of the slot; the present coupling methodology is crucial. The study involves the calculation of heat transfer rates on the surface downstream of the angled slot. Predicted film cooling effectiveness distribution together with the effects of governing parameters are described and show close agreement with the experimental data.

The purpose of this paper is to propose the new dependences of cycles to failure for a given initial crack length upon the stress amplitude in the linear fracture approach. The anticipated unified propagation function describes the infinitesimal crack-length growths per increasing number of load cycles, supposing that the load ratio remains constant over the load history. Two unification functions with different number of fitting parameters are proposed. On one hand, the closed-form analytical solutions facilitate the universal fitting of the constants of the fatigue law over all stages of fatigue. On the other hand, the closed-form solution eases the application of the fatigue law, because the solution of nonlinear differential equation turns out to be dispensable. The main advantage of the proposed functions is the possibility of having closed-form analytical solutions for the unified crack growth law. Moreover, the mean stress dependence is the immediate consequence of the proposed law. The corresponding formulas for crack length over the number of cycles are derived.

In this paper, the method of representation of crack propagation functions through appropriate elementary functions is employed. The choice of the elementary functions is motivated by the phenomenological data and covers a broad region of possible parameters. With the introduced crack propagation functions, differential equations describing the crack propagation are solved rigorously.

The resulting closed-form solutions allow the evaluation of crack propagation histories on one hand, and the effects of stress ratio on crack propagation on the other hand. The explicit formulas for crack length over the number of cycles are derived.

In this paper, linear fracture mechanics approach is assumed.

Shortening of evaluation time for fatigue crack growth. Simplification of the computer codes due to the elimination of solution of differential equation. Standardization of experiments for crack growth.

This paper introduces the closed-form analytical expression for crack length over number of cycles. The new function that expresses the damage growth per cycle is also introduced. This function allows closed-form analytical solution for crack length. The solution expresses the number of cycles to failure as the function of the initial size of the crack and eliminates the solution of the nonlinear ordinary differential equation of the first order. The different common expressions, which account for the influence of the stress ratio, are immediately applicable.

This paper deals with the application of the surface‐current method to the analysis of electromagnetic devices. The basics of the method are outlined and new developments involving the implementation of automated procedures for the definition of the geometry and sources, the contour subdivision according to suitable error indexes and the upgrading of the magnetic permeability to analyse saturated devices are described. As examples of application, the method is applied to the analysis of a single‐phase step motor and a linear brushless DC motor; the results are discussed and compared with the outputs of corresponding finite‐element method analyses.

An important facet of student’s sense of belonging is students’ relationships with, and time spent in, the university campus. The purpose of this paper is to explore the notion that access to campus “green space”, including parks, fields and gardens, may bolster students’ sense of belonging, improve well-being feelings and promote place attachment.

The authors surveyed students in different locations (including three green and one non-green campus spaces) across a large UK campus-based Northern institution. 146 students participated in the study in one of the four campus locations. The authors investigated how being in green spaces on campus may impact students’ sense of belonging, well-being and place attachment. The authors also qualitatively explored students’ perceptions of campus spaces through Ahn’s (2017) 10 Words Question measure.

Analyses demonstrate that students surveyed in green spaces reported significantly more positive sense of belonging, compared to students surveyed in non-green campus spaces. Campus location did not impact well-being, however. Students associated green spaces on campus with “calm”, “positive emotion” and “nature” words and non-green spaces with “busy”, “social” and “students”.

Taken together, the results of this paper suggest that access to green spaces can be important for campus sense of belonging. Thus, efforts should be made to ensure the sustainability of these important spaces across university campuses.

This study crucially examines how occupying green spaces on university campuses may impact students’ feelings of belongingness. To the best of the authors’ knowledge, this is the first study that uses field-based methods to understand students’ feelings whilst occupying green spaces.