Search results

This study aims to examine the direct effects of Green Human Resource Management (GHRM) practices on employee green behavior (EGB) in the university setting in Bangladesh and to find the indirect effects of how GHRM promotes EGB through sequentially mediating employee environmental knowledge management (EEKM) (environmental knowledge and knowledge sharing) and green self-efficacy (GSE).

For the empirical study, the researcher uses partial least squares structural equation modeling to test the proposed conceptual model built on existing literature for greening workplaces in the university in Bangladesh. The study has collected data from 288 Bangladeshi university employees using convenient sampling.

The findings that GHRM practices positively and significantly promote EGB, which captures the employee's tendencies to exercise green behavior in daily routine activities such as turning off lights, air conditioning, computers and equipment after working hours, printing on both sides, recycling (reducing, repair, reuse), disseminating good green ideas, concepts, digital skills and knowledge to peers and champion green initiatives at work. Moreover, the findings also revealed the sequential mediation of EEKM (environmental knowledge and knowledge sharing) and GSE of employees between the link GHRM and EGB. At last, the findings suggested that HR managers can implement the GHRM practices to promote green behaviors among the academic and non-academic staff of the university.

This study contributes to the field by extending knowledge of Social Cognition Theory and Social Learning Theory for greening workplaces in Bangladesh, particularly universities. Specifically, this empirical study is unique to the best of our knowledge and highlights the role of EEKM and GSE as mediation between GHRM and EGB association.

The main objective of this paper is to examine the impact of COVID-19 on the tourism flows of eight Asia-Pacific Countries: Australia, Hong Kong, Malaysia, New Zealand, the Philippines, Singapore, Taiwan and Thailand.

Using monthly data from 2019M1 to 2021M10 and 48 origin and eight destination countries in a panel Poisson pseudo-maximum likelihood (PPML) estimation technique and gravity equation framework, this paper finds that after controlling for gravity determinants, COVID-19 periods have a 0.689% lower tourism inflow than in non-COVID-19 periods. The total observations in this paper are 12,138.

A 1% increase in COVID-19 transmission in the origin country leads to a 0.037% decline in tourism flow in the destination country, while the reduction is just 0.011% from the destination. On the mortality side, the corresponding decline in tourism flows from origin countries is 0.030%, whereas it is 0.038% from destination countries. A 1% increase in vaccine intensity in the destination country leads to a 0.10% improvement in tourism flows, whereas vaccinations at the source have no statistically significant effect. The results are also robust at a 1% level in a pooled OLS and random-effects specification for the same model.

The findings provide insights into managing tourism flows concerning transmission, death and vaccination coverage in destination and origin countries.

The COVID-19-induced tourism decline may also be considered another channel through which the global recession has been aggravated. If we convert this decline in terms of loss of GDP, the global figure will be huge, and airline industries will have to cut down many service products for a long time to recover from the COVID-19-induced tourism decline.

It is to be realized by the policymaker and politicians that infectious diseases have no national boundary, and the problem is not local or national. That’s why it is to be faced globally with cooperation from all the countries.

This is the first paper to address tourism disruption due to COVID-19 in eight Asia-Pacific countries using a gravity model framework.

1. Asia-Pacific countries are traditionally globalized through tourism channels

2. This pattern was severely affected by COVID-19 transmission and mortality and improved through vaccination

3. The gravity model can be used to quantify the loss in the tourism sector due to COVID-19 shocks

4. Transmission and mortality should be controlled both at the origin and the destination countries

5. Vaccinations in destination countries significantly raise tourism flows

Asia-Pacific countries are traditionally globalized through tourism channels

This pattern was severely affected by COVID-19 transmission and mortality and improved through vaccination

The gravity model can be used to quantify the loss in the tourism sector due to COVID-19 shocks

Transmission and mortality should be controlled both at the origin and the destination countries

Vaccinations in destination countries significantly raise tourism flows

The readymade garments (RMG) industry acts as one of the foremost vital catalysts for financial as well as social advancement of Bangladesh. Due to the harsh impact of COVID-19, RMG sector has been confronting a never-seen-before phenomenon. Since the supply chain has seriously been influenced, concern raises among industry and policymakers on how to support against disturbances resulting from pandemics. Accordingly, this research aims to explore the vulnerability and capability factors of RMG sector in Bangladesh, their relationship and how these variables affect supply chain resilience.

A qualitative research design has been employed. In the first stage, content analysis has been performed. Since COVID-19 is a new experience, newspapers were the source to become acquainted with the vulnerability and capability factors following the guidelines provided by Pettit et al. (2010). In the second stage, in-depth interviews with key informants were conducted to investigate the relationship among the variables and how these factors may influence supply chain resilience.

This study identifies fourteen capability factors and their sub-factors of RMG industry in Bangladesh in order to improve the resilience capacity against the vulnerabilities in the context of COVID-19 pandemic.

This research is based on the setting of particular industry in Bangladesh, where respondents are immersed in a unique culture. Special care is required to generalize the results to other segments and phenomena.

The framework recognizes the balanced and unbalanced strength with the capability's components and find the relation between capabilities and vulnerabilities within the fashion industry. By creating the resilience network with the four conceivable positions, companies can find themselves with their capability's components and natural vulnerabilities.

This study investigates diverse components of capability figure against vulnerabilities to create the supply chain resilience. This paper, moreover, develops with four conceivable positions with their capabilities against existing vulnerabilities which brings timely contribution considering the context of COVID-19.

Current technology makes it easy for humans to take an image and convert it to digital content, but sometimes there is additional noise in the image so it looks damaged. The damage that often occurs, like blurring and excessive noise in digital images, can certainly affect the meaning and quality of the image. Image restoration is a process used to restore the image to its original state before the image damage occurs. In this research, we proposed an image restoration method by combining Wavelet transformation and Akamatsu transformation. Based on previous research Akamatsu's transformation only works well on blurred images. In order not to focus solely on blurry images, Akamatsu's transformation will be applied based on Wavelet transformations on high-low (HL), low-high (LH), and high-high (HH) subunits. The result of the proposed method will be comparable with the previous methods. PSNR is used as a measure of image quality restoration. Based on the results the proposed method can improve the quality of the restoration on image noise, such as Gaussian, salt and pepper, and also works well on blurred images. The average increase is around 2 dB based on the PSNR calculation.

Lean Manufacturing Systems (LMS) gained popularity among manufacturers globally. However, their efficacy in developing and least-developed countries remained noticeably understudied. Motivated by this research gap, the researchers of this study designed a quantitative study with a structured survey technique to investigate its context-specific impact on the apparel industry of a developing country. Hence, this study aimed to examine the relationship between LMS and elimination of waste (EOW) and operational performance (OP) and comprehend how the EOW mediates the relationship between an LMS and OP within the apparel industry of a developing economy.

The researchers collected data from 227 garment companies in Bangladesh. These organization-level data were then analyzed using the structural equation modeling approach with AMOS 20.0 software to examine the direct and indirect effects among EOW, LMS and OP.

The findings of this study suggest that EOW has a direct and significant effect on OP. This research also revealed that EOW has a partial mediating effect on the relationship between LMS and OP.

This research focused on a single industry administering self-reported data and cross-sectional design, limiting generalizability and causal inference.

LMS and directing efforts towards EOW can significantly improve the operational performance of apparel companies by reducing lead times and costs, improving quality and increasing productivity.

These findings can provide useful insight to managers, practitioners and future researchers to understand the relationship between EOW, LMS and OP to optimize their production processes and improve OP in the apparel industry.

This article reports the results of a survey in Brunei Darussalam concerning the use of pirated software among academics. Though, the suspicion of academics using pirated software has long been circulating around in East and South East Asia, no “hard data” has ever been collected. This article confirms the suspicion, and provides new information on the use of pirated software outside the USA. Also reveals the type of tasks accomplished by academics with pirated software, and identifies the reasons for using such software. Moreover, relates academics’ use of pirated software with nine factors related to demographics, computer exposure, and job profile of academics. The findings are discussed, and are compared with some related findings reported elsewhere. Finally, concludes with some suggestions to curb piracy, and identifies areas of further research.

The theory of competitiveness of cities is based on Porter’s Diamond Theory. There is a relation between housing and urban competitiveness. The adequacy of land supply and allocation of land for new housing development is integral. This paper aims to estimate the required number of housing units to secure housing needs in Tehran for the next four years in 1400 H.Sh (2021 A.D.). The research methodology is carried out using qualitative and quantitative approaches based on the given data. First, the population of Tehran in 1400 H.Sh was predicted using nonlinear quadratic polynomial, Gompertz and logistic models. Then, a Logistic model is proposed to estimate the number of housing units in Tehran. The calculations of residential units related to the population obtained from the Gompertz model equivalent to 663141 is suggested as a criterion for local authority to future decision making and planning for urban development.

The present research is an applied research in terms of the purpose a descriptive research in terms of the nature and methodology and a descriptive-analytical research in terms of attitude and approach toward the research problem (Hafeznia, 2013, 58, 63 and 71). To provide the required information for the analytical stage, a documentary method, related to the use of internal and external books and papers, has been applied. First, the population of Tehran in 1400 H.Sh is estimated using three nonlinear models of quadratic polynomials, Gompertz and logistic. Then, among them, the options that were more consistent with the estimation of the new comprehensive plan of Tehran (1386 H.Sh), which is the most important plan of this city, were chosen. After that, by using the logistic model, which is an appropriate expression of saturable phenomena and a suitable method of estimating the number of residential units in a city and based on the past trend, the future of housing is predicted, and the number of required residential units is determined.

Any city for competitiveness must seek the search and development of a set of unique strategies and practices that will shape its status from other cities. No single action for all cities is feasible. In fact, the most important challenge is to propose a unique value proposition and to formulate a strategy that distinguishes that city from the rest. Among the measures taken around the world is attention to infrastructure. From the point of view of competitiveness, different types of investment in infrastructure are important for different types of cities and in different stages of development of a city. Large cities need targeted investments in housing issues to overcome the segments associated with the poorer neighborhoods. Without investment in desirable housing, there will be holes in competitive advantage. In this paper, the number of residential units in Tehran was projected for 2021. The city’s population was originally estimated for 2021. In addition to the models used to predict and estimate necessary, it is necessary to consider the area, land use map, future development lines and […] city. To this end, the city can continue to meet the needs of residents’ diversification and the city’s needs. We cannot accept any predictions about the population and, consequently, the number of residential units. Providing predictions can provide the most predictive, or more prudent, and different scenarios that can emerge, which will lead to flexibility in the presentation of plans and programs. Among the models that were used to predict the population, the result obtained from second-order polynomial and Gompartz models was found to be appropriate for the estimation of the new comprehensive design of Tehran (2007). But the prediction of the population of the logistic model was beyond the prediction of the new comprehensive plan of Tehran (2007) and thus was not considered appropriate. The number of residential units required according to the predicted population of the second order polynomial models, Gompartz and the population considered in the new comprehensive plan of Tehran (2007). After the finalization of the proposed population, using the logistic model, the number of residential units needed in Tehran was projected for 2021. Since these three estimates are somewhat close to each other, it is suggested that Gompertz model calculations, equivalent to 663,141 residential units, are proposed, and according to that, local authorities are planning to supply land to achieve economic competitiveness (urban). As it is shown in the conceptual model of the paper in Figure 1, after determining the need for housing, it is necessary to ask whether the adequacy of the supply and allocation of land, as well as the importance of maintaining it for the development of housing by local authorities, is clear. Also, is there any suitable planning for that? Despite the severe shortage of ready-made land for the city of Tehran, a large volume of land is a large area owned by natural and legal persons, and, in particular, state-owned enterprises of semipublic and public institutions, which have been abandoned in cities for years without use and in the form of barren. According to municipal management laws, municipalities can receive land, taxes and fees that are included in the annual budget of the Tehran Municipality. According to the figure obtained from this study, which states that 663,141 residential units are needed for Tehran in 2021, large landowners in Tehran need to supply their land to the market. According to the Population and Housing Census in Tehran in 2011, there are 245,769 inhabited vacancies in Tehran; hence there are two scenarios for the provision of residential units in the city of Tehran in 2021, assuming that these units in the housing market require 417,372 units Another residence will be for Tehran, otherwise 663141 residential units will be needed for Tehran in 2021. Other possibl

Tehran is the largest city and the capital of Iran, and it is also the capital of the province Tehran. In the southern foothills of the Alborz Mountains within a longitude of 51 degrees and 2 minutes East to 51 degrees and 36 minutes East, with an approximate length of 50 kilometers and latitude 35 degrees and 34 minutes North to 35 degrees and 50 minutes North with an approximate width of 30 kilometers. The area of this city is 730 km². This is one of the largest cities in West Asia, the 25th the most populous city, and the 27th greatest city to the world. The administrative structure of Iran has been concentrated in this city. The city has been divided into 22 zones, 134 areas (including Rey and Tajrish), and 370 districts (Wikipedia). The problem of housing in the city of Tehran has always been one of the important issues that less has been planned for it. The result is housing shortage, high housing prices and so on, due to the excessive expansion of the city, its population increase and so on.

This paper aims to analyse the unified theory of acceptance and use of technology (UTAUT) and UTAUT2 constructs used in research on information and communication technology (ICT) adoption and use among micro, small and medium enterprises (MSMEs) in non-organisation for economic co-operation and development (OECD) countries. It also investigates the areas of ICT adoption along the value chain in studies using these constructs.

Systematic literature review (SLR) was conducted, where 910 studies were retrieved manually in five academic databases. Forty-eight studies were finalised after four filtration levels.

Majority of the studies were published within the past six years, and 85.42% were studies in the form of journal papers. UTAUT constructs more researched compared to UTAUT2 constructs. More than half of the studies investigated ICT application in value chain boundaries, while 16 studies were organisation-wide studies.

With developments in MSMEs’ technology, the UTAUT2 model must be expanded to internal company operations including finance and infrastructure maintenance. To boost competitiveness and productivity, non-OECD authorities should focus on the cost and user-centric characteristics of MSMEs’ technology adoption.

Although SLRs on UTAUT and UTAUT2 constructs have been attempted previously, this study contributes to the body of knowledge by focusing analysis on the application of those constructs on MSMEs in non-OECD countries and also by situating ICT adoption along the value chain of enterprises.

This study aims to identify and analyse the issues faced by internet-based small businesses in developing countries regarding cybersecurity and document how these businesses address the risks.

This study used the qualitative method. Respondents were internet-based small businesses selected by using theoretical sampling. Data were collected by using interviews and observations. The validity of the analysis was ensured by using triangulation and member checking.

This study reveals that small businesses managed to identify the loss of physical and monetary assets as possible damage. However, only a few businesses identified loss of intangible assets as possible cyber risks. Most small businesses had used basic cybersecurity measures to protect data access and some primary business activities. Unfortunately, they rarely take initiatives in preventing and early detecting cyber risks.

Findings of this study cannot be generalised as it aims to obtain new insights and document unexplored findings. Thus, if this study’s findings are going to be generalised, it is necessary to conduct an additional study. Secondly, this study did not assess how far small business had fulfilled the relevant information security framework as assessment required additional research, and this study only aimed to map the current situation in small businesses.

This study emphasised the importance of identifying valuable assets or resources when implementing cybersecurity measures. Focusing on security measures to protect identified assets from cyber risk will make the efforts more efficient and effective than using standardised cybersecurity measures. Third-party developers can also use this study to understand small businesses’ current cybersecurity implementation and their characters to design online platforms that suit these needs. Governments can also design educational activities that address small businesses’ lack of knowledge.

Most studies which focus on small businesses and information technology (IT) usually only discuss how they use IT. This study also brings new contributions by focusing on developing countries and specifically addresses internet-based technology cyber risk faced by e-commerce businesses. The qualitative method is used as most studies in e-commerce adoption were positivistic in nature, and inductive-based studies were rarely found on the topic.

This will not be an overstatement to state that the micro, small and medium enterprise (MSME) industry is crucial and the vital driver of the world economy. It covers different fields and dimensions such as defense products, electrical components and low-cost products. The sector plays a vital role in rendering work with low capital expenditure and is one of the emerging pillars of the Indian economy. Given the significance of this sector in contributing towards India's gross domestic product (GDP), it becomes appropriate to resolve all the issues related to MSME on a primary basis for ensuring required support. The recent global pandemic of COVID-19 has impacted this sector to a great extent. This research study targets the MSME industry and points out the directly linked enablers adding to improve the sector's resiliency and sustainability. Therefore, identification and the interrelationship between the MSME enablers need to be studied, which helps make a preliminary list that deals with their impedance benefaction towards resiliency increment.

The writers have done a comprehensive literature analysis of the enablers for the MSME sector to enable effectively and efficiently during emergencies and pandemics. An endeavor has been made on the enablers to order them by utilizing the modified Total Interpretative Structure Modelling (m-TISM) technique. Authentication of this research work highlights the significance of enablers and their position in a hierarchical structure. Further, MICMAC investigation on the recognized enablers is performed to arrange them in the four quadrants on their dependence and driving power.

The authors have attempted to predict the significance of the MSME sector and its essential contribution to the development of India's economy. The result of m-TISM in the current research work revealed the essential commitment of a hierarchical design dealing with the MSME considering the viewpoint of future development. The well-planned traditional design in the MSME helps establish better government policies and programs and transport infrastructure.

Every research study has a few restrictions. Likewise, the boundaries of the current study are that inputs collated for fostering the models are from a few specialists that may not mirror the assessment of the whole MSME sector.

The MSME sector is the developing sector in the current day, and it is needed to keep supporting the sector for the country's development. The current study has set out the functional establishment to improve MSME practicality. In addition, the research highlights the accountability of the MSME authorities to go with the identified enablers having solid driving power for successful usage of the available resources. This will help the MSME development and add value to practitioners and policymakers in the future.

The growth of this sector is essential for the development of the economy and the development of a nation. The current study presents a unique structure that gives a superior comprehension of the enablers. It will help play a crucial role in developing the MSME area. The structure model developed with the assistance of m-TISM and MICMAC examine the identified enablers with inputs from experts in the field. The hierarchy developed from the study recognized the enablers located on their commitment of suitability development of the MSME field.