Search results

The purpose of this paper is to synthesize and characterize nano-ceramic blue pigment Co_0.5Zn_0.5Al₂O₄ via polyacrylamide gel method. Generally, the high cost and the environmental toxicity of cobalt aluminate pigments lead them to become less common and cause problems in production process. To significantly reduce this problem, it is required to reduce the cobalt in the pigment and replace the cobalt with some amounts of zinc in the structure.

In this paper, calcination temperature and its effects on phase specification and color properties of final product were investigated. The powders were studied by using XRD, FESEM, TG/DTA, FTIR, UV-Vis and colorimetric in CIELab space, in which the calcination temperatures were set to 600°C, 800°C and 1,000 °C, and the inert atmosphere was air.

According to the XRD patterns, single-phase spinel structure with a good crystallinity was formed even in the low temperature. The infrared spectra displayed vibrations at about 500, 560 and 680 cm⁻¹, which were ascribed to the spinel structure. FESEM images showed nanoscale particles with an average size of 32 nm. Regarding the Co²⁺ spin transitions in tetrahedral sites, the UV-Vis spectra presented three bands at 552, 598 and 628 nm.

The colorimetric data indicated the formation of blue pigments corresponding to negative values of b*. The color of pigments was affected by calcination temperature.

The characterization analysis shows that a blue pigment has been obtained in this research. Different degrees of blue color were obtained at different calcination temperatures.

The purpose of this paper is to colour aluminium pigment to the highest chroma using SiO₂ and organic silane with dichlorotriazine reactive dye and investigate its reaction mechanism, chemical stability and thermal properties to improve its applicability in surface coatings.

Aluminium pigment was encapsulated by the catalysed sol-gel method using SiO₂, followed by modification with γ-glycidoxypropyltrimethoxysilane (GPTMS). Purified reactive dye (1-Amino-4-[3-(4,6-dichlorotriazin-2-ylamino)-4-sulfophenylamino]anthraquinone-2-sulfonic acid (X-BR)) was covalently immobilized onto modified SiO₂ to obtain coloured aluminium pigment. The reaction mechanism, chemical stability and thermophysical properties were investigated by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy, X-ray diffraction, scanning electron microscope, transmission electron microscope and thermogravimetric analyses (TGA).

The results showed that X-BR was covalently attached to modified Al/SiO₂ with maximum colour grafting of 95 per cent when the dosage of GPTMS and X-BR per weight of modified Al/SiO₂ was 25 and 15 per cent, respectively, at pH 8.5 and a temperature of 40°C. The coloured aluminium pigment had good chemical stability with excellent anti-migration properties in many solvents.

The organic silane used required a careful control of pH to ensure maximum colour grafting efficiency meanwhile other silanes with amine groups could also be used effectively with different kinds of colorants besides reactive dyes.

The method used is less cumbersome and provides a simple route to preparing coloured aluminium pigment.

The use of organic-inorganic SiO₂/γ- GPTMS with purified reactive dye to covalently colour aluminium pigment to the highest chroma is novel and will help advance the frontiers of knowledge on coloration of aluminium pigments.

This study aims to evaluate the use of polyoxyethylene lauryl ether (PLE) as a dispersant in the preparation of novel pigment dispersion with enhanced dispersion ability, which can find application in the printing industry.

To obtain a good dispersion, PLE was used as a dispersant in pigments dispersion. The colloidal and rheological properties of the PLE-based dispersion, such as particle distribution, zeta potentials and apparent viscosity were evaluated.

The particle sizes of the pigment dispersions were within the range of 150 to 200 nm. The measurement of zeta potentials varied between −24 to −32 mV, revealing a strong surface charge interaction between pigments and PLE. Subsequently, its stability to high-speed centrifuge and freeze-thaw treatment was carefully investigated. To demonstrate the coverage of pigment particles by PLE, thermogravimetric analysis was carried out. Moreover, X-ray diffraction was used to disclose the combined impacts of PLE and ultrasonic power on the crystal structures of the pigments. Finally, the coloring performance and leveling properties of pigment dispersions on cotton substrates were evaluated by measuring their K/S values (color strength), rub and color fastness properties, which possessed good results.

The dispersant used is incompatible with strong oxidizing agents and strong bases. More so, modification to improve its dispersion properties can be studied.

The use of PLE as a dispersant could be readily used in pigment dispersion processes and other suitable applications. PLE could also be used as a co-surfactant in synergy with other surfactants or dispersants in the dispersion process.

The use of PLE in pigment dispersion as well as investigating its coloring properties on cotton fabric is novel and can find various applications in the dying, printing and coating industry.

The purpose of this study is to solve the oil drill pipe joints and casing excessive wear problems and to improve the drill pipe joint-casing wear resistance and anti-friction properties.

On the surface of the drill pipe joints using oxyacetylene flame bead weld (BW) wear-resistant welding wire ARNCO-100XT^TM prepares welding layer, high-velocity oxygen fuel (HVOF) Cr₃C₂75-NiCr25 prepares coating and subsonic flame spray and remelt (SFSR) Ni60 prepares coating, then comparing and analyzing the friction and wear of the three types of wear-resistant layers and the casing under the condition of 1.8 g/cm³ mud drilling fluid lubrication. The wear resistance and anti-friction performance of the drill pipe joints were evaluated based on the wear situation, finally revealing its friction and wear mechanisms.

Three types of wear-resistant layers can improve the surface wear resistance of drill pipe joints, the wear-resistant layer and the substrate are well combined and the welding layers and coating are both dense and uniform. The wear resistance of the HVOF-Cr₃C₂75-NiCr25 coating is 10.9 times that of the BW-ARNCO-100XT^TM weld layer, and the wear resistance of the SFSR-Ni60 weld layer is 2.45 times that of the BW-ARNCO-100XT^TM weld layer. The anti-friction properties of SFSR-Ni60 welding layer is the best, followed by HVOF-Cr₃C₂75-NiCr25 coating, and the anti-friction properties of BW-ARNCO-100XT^TM welding layer is the worst among the three.

The research results of this paper have great practical value in the process and material of improving the wear resistance and anti-friction performance of the drill pipe joint casing.

This study aims to the effect of NaF, Li₂CO₃ and H₃BO₃ minerals was investigated, and the best mineralizer was found to be H₃BO₃. Furthermore, the effect of temperature was investigated, and the synthesized samples were calcined at temperatures of 1100, 1200 and 1300 °C to select the optimum calcination temperature.

This study was aimed at thoroughly investigating the effects of mineralizer addition and temperature on the synthesis of malayaite pink pigment based on raw materials of SnCl₂-SiO₂-Ca(OH)₂-K₂Cr₂O₇. To this end, the optimization of the synthesis parameters such as mineralizer addition and temperature was completely perused.

The optimum temperature was 1300 °C, and the color efficiency of pigments was evaluated by colorimetric (CIE L*a*b* system) analysis, and these parameters were close to those of industrial pigments.

To the best of the authors’ knowledge, for the first time, the effect of mineralizer addition and temperature on the synthesis of malayaite pink pigment was investigated through the sol-gel method. Herein, different parameters were optimized to propose a novel pigment with a much better performance.