Search results

The purpose of this study is to investigate the influence of rotational speed on the oil film stability of the hydrostatic rotary table having double rectangular oil pads. The oil film stability is evaluated based on the oil film stiffness under constant load condition and the displacement response amplitude of the oil film under disturbance load condition.

The oil film stability theoretical equations of the double rectangular oil cavity are deduced such as oil film stiffness, damping and dynamic equations. A simulation model is developed to analyze the relationship among oil film temperature, oil film pressure fields and oil film stability. The user-defined function programs are used to control the rotational speed, lubricant viscosity and oil film thickness during the simulation. In addition, an experimental rig is built to test the simulation results.

This study shows that oil film stability decreases with increasing rotational speed under constant load and disturbance load. The trend of oil film stability decreased slowly within 30 r/min, and then rapidly. However, since the hydrodynamic pressure effect, the decrease rate of stability is mitigated under constant load and high rotational speeds.

The conclusions can provide a theoretical basis for improving the oil film stability of machines with similar hydrostatic support structure.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-07-2024-0267/

This paper aims to study the influence of cylindrical texture parameters on the lubrication performance of static and dynamic pressure thrust bearings (hereinafter referred to as thrust bearings) and to optimize their lubrication performance using multiobjective optimization.

The influence of texture parameters on the lubrication performance of thrust bearings was studied based on the modified Reynolds equation. The objective functions are predicted through the BP neural network, and the texture parameters were optimized using the improved multiobjective ant lion algorithm (MOALA).

Compared with smooth surface, the introduction of texture can improve the lubrication properties. Under the optimization of the improved algorithm, when the texture diameter, depth, spacing and number are approximately 0.2 mm, 0.5 mm, 5 mm and 34, respectively, the loading capacity is increased by around 27.7% and the temperature is reduced by around 1.55°C.

This paper studies the effect of texture parameters on the lubrication properties of thrust bearings based on the modified Reynolds equation and performs multiobjective optimization through an improved MOALA.