Search results

The purpose of this study is to assess the attitudes and practices of students and practitioners in the dyeing studio. Empirical evidence shows that synthetic dyes are the most commonly used dyestuff because of their colour fastness as compared with natural dyes. However, it is proven scientifically that synthetic dyes and their auxiliaries are carcinogenic and allergenic, which pose as health risks to users.

The study used analytical observational study design, where observation, questionnaire and interview were the instruments for data collection.

A survey conducted at selected dyeing studios in Ghana revealed the excessive use of vat dyes by students and practitioners because of its availability and accessibility on the local market. Adversely, the study found non-use of personal protective equipment by students and practitioners for protection against hazardous effects of dye chemicals. Again, poor studio set up with limited space and lack of proper waste drainage systems at the various dyeing studios results in inappropriate disposal of dyes, leading to environmental pollution.

Dyeing throughout history has been practiced to colour a fabric or yarn for specific use in the environment, which brings in some revenue. This practice however employs the use of dyes coupled with its auxiliaries, which poses some health problems in the short, medium and long term because of certain attitudes and practices exhibited by students and practitioners in the studio. It is therefore imperative for effective compliance to safety rules and practices by students and practitioners to ensure their safety. It is also critical that educational institutions and practitioners build modern dyeing studios which are spacious, well ventilated and efficient in limiting environmental pollution in compliance with eco-friendly practices. The study further recommends collaboration between Academia, local dyers’ association , Ghana Health Service and the Environmental Protection Agency to organize workshops to ensure best safety practices to save lives and the environment.

The innovativeness of dressmakers is a concern to respondents to satisfy their clothing needs. The purpose of this study is to determine the criteria that respondents use to judge the quality of clothing and its influences on the innovative ability of dressmakers in the clothing manufacturing industries.

Three hundred and ninety-seven (397) respondents in the Takoradi Metropolis of Ghana filled out a questionnaire, and the results were used to compile data for the study. The sample size was calculated using Miller and Brewer formula. The data was analysed using structural equational modelling with the SmartPLS v.4 software.

The results showed that respondents are very interested in the calibre of clothing produced by their dressmakers. However, the study revealed that when evaluating the quality of a garment, respondents do not simply accept what has been sewn for them but also consider the performance, appearance, fit and shape of the garment. Findings revealed that there was a significant relationship between garment appearance quality (t = 2.605; p < 0.05), garment performance quality (t = 3.915; p < 0.05), garment shape quality (t = 6.248; p <0.05) and fashion innovations. Subsequently, the evaluation of garment fit quality by respondents revealed it does not bring about innovations (t = 1.310; p > 0.05).

The continuous evaluation of custom-made clothing from customers will go a long way towards highlighting the relative criteria they use to evaluate the innovation of dressmakers. This will help improve the creativity of the dressmakers since such feedback will help them understand and innovate their production skills to meet the preferences of customers.

The present study provides an in-depth understanding of how garment quality evaluation by customers influences the innovation of dressmakers in Takoradi, Ghana. The constructs were developed for the study to capture the appropriate data from customers for the study. This presents an evaluation criterion on four garment quality variables imperative for use or modification by other studies.

The purpose of this study is to investigate the physical, ultraviolet (UV), colour appearance and colour fastness properties of selected fabrics dyed with natural dyes from Daboya and Ntonso communities of Ghana. The study further highlights the rich cultural heritage of traditional dyeing from these two communities. Craftsmen in West Africa especially Ghana, have sustained the traditional dyeing methods to produce textile products for consumers.

In this study, two sample fabrics were purchased from craftsmen at Ntonso and Daboya communities in Ghana. These fabrics were analysed at the laboratory under standard test methods for their physical, UV, colour appearance and colour fastness properties.

Results showed that all the sample fabrics have good UV shielding performance (ratings above 50+). Daboya sample fabrics (dyed with indigo dyes) produced more colour stains than the sample fabrics from Ntonso (dyed with black “kuntunkuni” dyes). The K/S_sum value or colour yield reduced after washing but that alternatively increased the calculated ultraviolet protection factor.

Findings from this study exposed the unique UV performance of dyed traditional fabrics (using natural dyes) from Ntonso and Daboya communities in Ghana. This inspires and enforces the need for craftsmen to improve their production cycle to produce these fabrics in different sizes which provides the necessary UV shielding abilities for consumers in the wake of climate changes.

This study demonstrated that the natural dyeing process at the two communities produced relatively good UV and colour fastness properties of the sample fabrics. These eco-friendly dyeing practices have survived over time to maintain and promote the concept of sustainability within the textile and fashion industry in Ghana.

Safety-related issues are prominent in dyeing workplaces and studios that result in accidents. The purpose of this study is to investigate the compliance towards health safety practices by students at the dyeing studios in selected universities in Ghana.

A structured online questionnaire was developed and used to collect 285 responses from students studying at the textile and fashion department of ten universities in Ghana. The study used the partial least square (PLS) algorithm of the structural equational modelling (SEM) by bootstrapping with 5,000 samples in the SmartPLS-SEM version 4.0.

Students exhibited good attitudes with significant knowledge regarding health safety hazards at the dyeing studio. Results revealed that students’ attitudes significantly and positively affect their knowledge of health safety hazards; hence, as attitude increases, their knowledge of health safety hazards also increases. However, institutional support significantly and negatively affects the knowledge of health safety hazards by students at the dyeing studio. Subsequently, institutional support significantly and positively affects students’ attitudes towards health safety hazards at the dyeing studio; hence, as institutional support increases, their attitude towards health safety hazards also increases. In the moderation analysis, results showed that students’ attitude dampens the negative relationship between institutional support and student’s knowledge.

Work-related safety at the dyeing studios is very important to help drive for an injurious free hands-on practice with dyeing activities. Hence, the findings of this study call on institutions to provide appropriate personal protective equipments and first aid kits, effective training and supervision for workspace safety at the dyeing studios for students. This would go a long way to maintain good health safety practices during students’ dyeing activities at the studio, hence eliminating possible hazards.

The present study provides an in-depth understanding of how key variables such as institutional support influence the knowledge and attitude of students towards studio dyeing practices. Key findings from the study reiterated the importance of training workshops, state-of-the-art studios and adherence to safety by students to prevent injuries.

The purpose of this study is to identify the print effects produced on selected fabrics due to the adaptation of styrofoam, plastic net and wood as stamp blocks for printing.

The art-based experimental research approach was used to produce and identify the art (prints) produced by stamp blocks on different fabrics using water-soluble print paste.

They stamp block surfaces used in the block printing process produced interesting effects or prints that are uniquely associated with each other. Fabrics such as silver and satin produced shinny print effects coupled with a tough hand or feel as compared to a paperish hand produced on the surfaces of cotton-polyester blend and linen fabrics. The addition of white glue to the paste produced a smooth and embossed-like print effect on fabrics like mercerised cotton and linen. Further results were captured to indicate the hand of these fabrics after printing due to the change in viscosity of the print paste.

The use of calabash and wood surfaces as stamp blocks used in Ghana and the rest of the world is common for printing patterns on fabrics. This study essentially reveals the possibility of using different surfaces for stamp blocks which produce aesthetically pleasing print effects. This when adopted by craftsmen and students would widen the teaching and creative scope in block printing and further produce viable prints for the market using available materials in the environment. These activities would promote and maintain the philosophy of block printing even in the era of advance printing technologies.

The purpose of this study is to present a systematic review of the effects of COVID-19 on the conventional textile production subsector. The emergence of the COVID-19 virus in 2019 has subsequently caused many problems, such as unemployment, business closures, economic instability and high volatility in the global capital markets amongst others within the wider manufacturing industry including textile production.

Relevant secondary data are obtained from the Scopus database and Statista. Based on the data analysis of 21 seed articles, three research themes are identified: challenges in the textile industry, new material innovations or solutions and the textile industry performance.

The results reveal that the COVID-19 pandemic has affected the textile industry, disrupted the supply chains of this industry, affected profit margins, stopped employment and impacted the retail of products to customers. Aside from the negative repercussions, there are also good sides to the pandemic which, for instance, range from advanced material innovations to textiles with anti-microbial, self-cleaning and anti-bacterial properties that would limit the transfer of the virus.

Findings reinforced the need for effective strategies and investments in the research and development departments of the various firms in the textile industry to innovate operations and novel materials for the next global pandemic.

Many companies have adopted novel strategies and practices that are helping them to survive the pandemic. This study, therefore, recommends further investigation into material innovations and reimagining strategies by companies and the supply chain within the textile industry so that it is protected against future crises.

The purpose of this study is to develop a system that detects warp breakage in manual looms using simple mechanisms combined with electronic circuitry.

This study used the universal design methodology model where results from observations and interviews aided in designing the appropriate blueprints for the mechanism.

Testing procedures revealed that the conductivity of steel bars coupled with the weight of the droppers affected the efficiency of the mechanism. Additionally, the weight of the drop wires influenced the rising of the warp threads during shedding. Considering this, a plate thickness of 0.06 mm was ideal for the droppers which did not affect warp shedding. Test outcomes at the weaving shed proved the workability of the mechanism for timely or prompt repair of a broken warp by weavers that ensured fabric quality.

The issue of warp breaks remains a critical problem at weaving on manual looms which influence the quality of fabrics. These looms are used by craftsmen in producing interesting fabrics for the market of which they depend on for their living. Premise on this, a two-way (light + sound) alert system was developed to assist weavers to effectively locate and repair broken yarns. Additionally, weavers with special needs (blind people) would be notified on a warp break for immediate repair from someone. This would limit the unnecessary challenges associated with broken warp yarns during weaving.