Search results

The purpose of this paper is to develop a statistical model for delamination and thrust forcing during drilling of carbon-fibre reinforced polymer (CFRP) composites using response surface methodology (RSM) to determine the input parameters (drill speed, drill diameter and feed rate) that influences the output response (delamination and thrust force) in the machining of CFRP composite using solid carbide drill cutter.

Three factors, three levels central composite face centred (CCFC) design, is used to conduct the experiments on CFRP by carbide drill. The whole quality evaluation (delamination) was done by video measuring system to measure the width of maximum damage of the machined CFRP composite. The thrust forces during drilling are measured using digital multi-component cutting force (Make: IEICOS, Model: 652) dynamometer. The “Design Expert 7.0” is used to analyse the data collected graphically. An analysis of variance is carried out to validate the model and for determining the most significant parameter.

The response surface model is used to predict the input factors influencing the delamination and thrust force on the drilled surfaces of CFRP composite at different cutting conditions with the chosen range of 95 per cent confidence intervals. The analysis on the influences of the entire individual input machining parameters on the delamination and thrust force has been carried out using RSM. This investigation revealed that the drill diameter is the eminent factor which affects the responses.

In all, 0.3, 0.4 and 0.5 mm holes have been successfully made on CFRP using vertical machining center, whereas the previous researchers have not drilled hole size less than 1 mm in CFRP using vertical machining center.

The purpose of this paper is to identify the ideal process parameters to be set for the drilling of hybrid fibre-reinforced polymer (FRP) (kenaf and banana) composite using High-Speed Steel drill bits (5, 10, 15 mm) coated with tungsten carbide by means of statistical reproduction of the delamination factor and machining force using Taguchi–Grey Relational Analysis.

The contemplated process parameters are Feed, Speed and Drill Diameter. The trials were carried out by taking advantage of the L-27 factorial design by Taguchi. Three factors, the three level Taguchi Orthogonal Array design in Grey Relational Analysis was used to carry out the trial study. Video Measuring System was used to identify the damage around the drill region. “Minitab 18” was used to examine the data collected by taking advantage of the various statistical and graphical tools available. Examination of variance is used to legitimize the model in identifying the most notable parameter.

The optimised set of input parameters were found out successfully which are as follows: Feed Rate: 450 mm/min, Cutting Speed: 3,000 rpm and Drill Diameter of 5 mm. When these values are fed in as input the optimised output is being obtained. From ANOVA analysis, it is apparent that the Speed (contribution of 92.6%) is the most influencing parameter on the delamination factor and machining force of the FRP material.

Optimization of process parameters on drilling of natural fibres reinforced in epoxy resin matrices using Taguchi–Grey Relational Analysis has not been previously explored.

This study aims to the optimization using three factors and three-level parameters (sliding speed [rpm], sliding distance [m/s] and load [N]) of design matrix were adapted to Box–Behnken design using design expert v8.0 software. Based on the parameters, to develop the linear regression equation and to find the significant considerable wear process parameters based on output responses like wear loss (WL) and coefficient of friction (COF) value of polymer matrix composites (PMC) specimen of Acrylonitrile-butadiene-styrene (ABS)/cellulose composite (80 wt% of ABS and 20 wt% of cellulose).

The fabrication of the ABS/cellulose composite sample was carried out by the simple hands-on stir process method. As per the American Society for Testing and Materials G99 standard, the sample was made by the molding process. The wear analysis was made by multi tribotester TR25 machine and validated the developed model by using statistical software design expert v.8.0 and numerical tools like analysis of variance. The surface morphology [field emission scanning electron microscopy (FESEM) analysis] of the sample was also observed using the Quanta FEG-250 FESEM instrument.

The parameters like sliding speed, sliding distance and load are independently affected the COF value and WL of the 80% of ABS matrix and 20% cellulose reinforced composite material. The regression equations were generated by the coefficient of friction value and WL, which predicted the minimum WL of 80% of ABS matrix and 20% of cellulose reinforced composite material. The worn surface analysis result exposes the worn path and equal distribution of reinforcement and matrix on the surface of composite material.

The literature survey revealed a small number of studies available regarding wear analysis of ABS matrix and cellulose reinforced composite materials. In the present work, to fabricate and evaluate the wear performance of PMC (80% of ABS and 20% of cellulose) depends on the WL and COF value. The maximum and minimum COF value (µ) of 80% of ABS and 20% of cellulose composite material is 4.71 and 0.28 with the optimized wear process parameter by 1,000 mm of sliding distance, 0.25 (m/s) of sliding speed and 9 N of load.

This study aims to examine the impact of environmental, social, and governance (ESG) practices on financial risk, with operational ability and profitability as moderating variables, within the infrastructure sector in Indonesia.

The sample consists of 14 infrastructure companies listed on the Indonesia Stock Exchange over the period of 2020–2022, resulting in a total of 42 firm-year observations. The study employs a random-effects model for panel data regression analysis to test the hypotheses. ESG serves as the independent variable, financial risk as the dependent variable, and operational ability (measured by total asset turnover) and profitability (measured by return on assets) as moderating variables.

The results reveal that ESG practices have a significant positive impact on financial risk. Furthermore, operational ability negatively moderates the relationship between ESG and financial risk, while profitability positively moderates this relationship. These findings suggest that although higher ESG scores may elevate financial risk due to associated costs and uncertainties, firms with greater operational efficiency and profitability are better equipped to mitigate and manage these risks more effectively.

This study focuses on infrastructure companies in Indonesia, which may limit the generalizability of the findings to other sectors or geographic regions. Future research could broaden the scope by incorporating diverse industries and cross-country contexts to enhance the robustness and applicability of the results.

The findings offer valuable insights for policymakers and corporate managers. Policymakers can develop frameworks to encourage sustainable practices without imposing excessive financial burdens on companies. Managers can leverage operational efficiency and profitability to integrate ESG practices effectively, thereby balancing sustainability goals with financial performance.

This study contributes to the scarce literature on the moderating effects of operational ability and profitability on the relationship between ESG practices and financial risk, particularly in the context of the infrastructure sector in Indonesia.

The purpose of this study was to assess the bacterial viability, antioxidative activity, antimutagenicity and sensory evaluation of fermented onion types by using probiotic starters after fermentation at 37 °C for 24 hours and storage in the refrigerator for 28 days.

For onion fermentation, Lactobacillus acidophilus (LA-5), Bifidobacterium bifidum (BB-12), and Streptococcus thermophilus (ST) were utilised. This research was conducted on three types of onion: white onion, red onion and scallion. With a 5% brine solution, the onions were sliced into 3-5 cm long and 1-2 cm wide slices. The process of fermentation was achieved by adding 2% (10⁸ CFU/ gm) of fresh probiotic starter and incubating it for 24 hours at 37 °C. The fermented onion samples were kept in the refrigerator for 28 days. After fermentation and storage, the pH and total acidity were estimated, the vitality of probiotic bacteria was evaluated in samples of the onion species. The Gas chromatography-mass spectrometry (GC-MS) technique was used to identify the bioactive components in fermented onion types. The antioxidant activity of fermented onions was measured using the 2,2-diphenyl-1-picryl-hydrazyl-hydrate (DPPH) radical scavenging activity assay and the hydroxyl radical scavenging activity test. The Ames test was used to detect the antimutagenicity of fermented onion samples.

After fermentation, the fermented scallion (p = 0.036) has the highest vitality of all the starter bacteria species. The fermentation of onion types produced a pH of between 4.1–4.7 and 0.19–0.23% total acidity, which is in the range of reduced 3.1–3.5 pH values and 0.42–0.63% total acidity after 28 days. The viability of Lactobacillus acidophilus and Bifidobacterium bifidum in fermented scallions was Log. 7.79 and 7.57 CFU/gm. The GC-MS technique found 14 bioactive compounds in fermented white onions and 13 compounds in fermented white onions, with 15 compounds in scallion fermentation. The majority of these bioactive compounds are strong antioxidants. The antioxidant properties of fermented scallion significantly increased after 28 days of storage time, showing an inhibitory effect on the DPPH assay (p = 0.02) and the scavenging activity of the hydroxyl radical assay (p = 0.01). Sensory evaluation tests revealed that the fermented scallion was a suitable product in terms of appearance, aroma and overall acceptability.

Commercially accessible probiotic foods account for a sizable portion of the consumer market. Furthermore, as consumer interest in healthy eating grows, so does demand for plant-based goods. All onion types fermented with probiotic bacteria have many chemical compounds that have both antioxidant and carcinogenic activity. The fermented scallion onion sample was significantly superior to the rest of the other types of onions.

This study aims to investigate the potential use of potato peel extracts as antibacterial finishes for cotton fabrics against Staphylococcus aureus and Escherichia coli. Potato peels are abundant as waste and provide a natural, cheaper and sustainable alternative means of preventing the spread of bacterial infections on cotton fabric.

This research included the characterization of potato peel extracts, application of the extract onto cotton fabric and efficacy testing of the treated cotton fabric against bacteria. Phytochemical screening, agar well diffusion antibacterial test, minimum inhibitory concentration and Fourier transform infrared (FTIR) tests were used to characterize the extract. Antibacterial efficacy of the treated fabric was determined qualitatively using the disc diffusion assay and quantitatively using the bacteria reduction test.

Phytochemical screening confirmed the presence of several secondary metabolites including phenols and flavonoids. Antibacterial tests revealed a positive response in Escherichia coli and Staphylococcus aureus with a zone of inhibition of 6.50 mm and 5.60 mm, respectively. Additional peaks on the FTIR spectroscopy confirmed the presence of potato peel extract on the treated cotton fabric. The treated cotton fabrics showed efficacy against Staphylococcus aureus and Escherichia coli up to 20 washes.

This study introduced the application of potato peel extracts onto cotton fabrics and assessment of the antibacterial properties before and after washing. Results of this study suggest that potato peel extracts can be used as an organic eco-friendly antibacterial finish for cotton fabrics.

The purpose of this study is to establish a method for accurately extracting torch and seam features. This will improve the quality of narrow gap welding. An adaptive deflection correction system based on passive light vision sensors was designed using the Halcon software from MVtec Germany as a platform.

This paper proposes an adaptive correction system for welding guns and seams divided into image calibration and feature extraction. In the image calibration method, the field of view distortion because of the position of the camera is resolved using image calibration techniques. In the feature extraction method, clear features of the weld gun and weld seam are accurately extracted after processing using algorithms such as impact filtering, subpixel (XLD), Gaussian Laplacian and sense region for the weld gun and weld seam. The gun and weld seam centers are accurately fitted using least squares. After calculating the deviation values, the error values are monitored, and error correction is achieved by programmable logic controller (PLC) control. Finally, experimental verification and analysis of the tracking errors are carried out.

The results show that the system achieves great results in dealing with camera aberrations. Weld gun features can be effectively and accurately identified. The difference between a scratch and a weld is effectively distinguished. The system accurately detects the center features of the torch and weld and controls the correction error to within 0.3mm.

An adaptive correction system based on a passive light vision sensor is designed which corrects the field-of-view distortion caused by the camera’s position deviation. Differences in features between scratches and welds are distinguished, and image features are effectively extracted. The final system weld error is controlled to 0.3 mm.

The purpose of this paper is to prepare calcium oxide (CaO) nanoparticles by green synthesis technique and study its structural, morphological and optical properties. The prepared samples were calcined at, 200°C, 300°C and 500°C, and the variation in the properties at different temperatures were investigated.

Green approach has been used in the present work to synthesise the CaO nanoparticles using Murraya Koenigii leaf (curry leaves) extract as a capping agent. This technique involves the use of nontoxic reagents and natural products derived from various parts of plants.

Studies reveal that CaO nanoparticles with good optical properties can be synthesized successfully by green approach. The optical absorbance spectra show a broad absorption peak around 400–500 nm. FTIR studies confirm the presence of different functional groups that help in the stabilization of CaO nanoparticles. PL emission spectra show a high intensity emission peak at around 231 nm in addition to peaks at 375 nm and 400 nm. XRD studies show planes of CaO cubic phase. SEM images show a nonuniform distribution of spherical particles along with some clusters. EDX spectra confirm the presence of calcium and oxygen.

CaO nanoparticles have wide applications in optical devices as well as in phototherapy. It is thus interesting to devise new and eco-friendly techniques to synthesise these nanoparticles to suit these applications.

This work would provide a new insight into the preparation of different metal oxide nanoparticles by a very simple and cost-effective green technique without the use of toxic reagents.