Search results

The purpose of this paper is to present an automatic approach for mesh sizing field generation of complicated  computer-aided design (CAD) models.

In this paper, the authors present an automatic approach for mesh sizing field generation. First, a source point extraction algorithm is applied to capture curvature and proximity features of CAD models. Second, according to the distribution of feature source points, an octree background mesh is constructed for storing element size value. Third, mesh size value on each node of background mesh is calculated by interpolating the local feature size of the nearby source points, and then, an initial mesh sizing field is obtained. Finally, a theoretically guaranteed smoothing algorithm is developed to restrict the gradient of the mesh sizing field.

To achieve high performance, the proposed approach has been implemented in multithreaded parallel using OpenMP. Numerical results demonstrate that the proposed approach is remarkably efficient to construct reasonable mesh sizing field for complicated CAD models and applicable for generating geometrically adaptive triangle/tetrahedral meshes. Moreover, since the mesh sizing field is defined on an octree background mesh, high-efficiency query of local size value could be achieved in the following mesh generation procedure.

How to determine a reasonable mesh size for complicated CAD models is often a bottleneck of mesh generation. For the complicated models with thousands or even ten thousands of geometric entities, it is time-consuming to construct an appropriate mesh sizing field for generating high-quality mesh. A parallel algorithm of mesh sizing field generation with low computational complexity is presented in this paper, and its usability and efficiency have been verified.

Automatic mesh generation is still a challenge problem for combustion fluid dynamics simulations because of the high-quality requirement and complexity of geometries. This paper aims to find an efficient automatic analysis model creation and mesh generation method to save the time for pre-processing in numerical simulations.

Based on the previous work, we explore effective model processing and mesh generation methods from practical engineering applications. Considering the automation and high quality requirement, we construct an automatic mesh generation procedure for combustion fluid dynamics problems.

The numerical results show that the procedure we proposed in this paper can automatically generate high quality mesh for combustion fluid dynamics simulations. The strategy of fluid model construction is time-saving and with high-precision. The mesh generation method in our procedure is automatic and efficient.

The procedure proposed in this paper is applicable to the practical engineering application model, such as aircraft simulation, aeroengine simulation and so on. The procedure has been integrated into an numerical simulation software.

The method proposed in this paper has very practical application value. It can be used in the practical application and saves a lot of manual processing time for numerical stimulation specialists.

The purpose of this paper is to construct a proportion-integral-type (PI-type) memristor, which is different from that of the previous memristor emulator, but the constructing memristive chaotic circuit possesses line equilibrium, leading to the emergence of the initial conditions-related dynamical behaviors.

This paper presents a PI-type memristor emulator-based canonical Chua’s chaotic circuit. With the established mathematical model, the stability region for the line equilibrium is derived, which mainly consists of stable and unstable regions, leading to the emergence of bi-stability because of the appearance of a memristor. Initial conditions-related dynamical behaviors are investigated by some numerically simulated methods, such as phase plane orbit, bifurcation diagram, Lyapunov exponent spectrum, basin of the attraction and 0-1 test. Additionally, PSIM circuit simulations are executed and the seized results validate complex dynamical behaviors in the proposed memristive circuit.

The system exhibits the bi-stability phenomenon and demonstrates complex initial conditions-related bifurcation behaviors with the variation of system parameters, which leads to the occurrence of the hyperchaos, chaos, quasi-periodic and period behaviors in the proposed circuit.

These memristor emulators are simple and easy to physically fabricate, which have been increasingly used for experimentally demonstrating some interesting and striking dynamical behaviors in the memristor-based circuits and systems.

The purpose of this paper is to develop two types of simple jerk circuits and to carry out their dynamical analyses using a unified mathematical model.

Two types of simple jerk circuits only involve a nonlinear resistive feedback channel composited by a nonlinear device and an inverter. The nonlinear device is implemented through parallelly connecting two diode-switch-based series branches. According to the classifications of switch states and circuit types, a unified mathematical model is established for these two types of simple jerk circuits, and the origin symmetry and scale proportionality along with the origin equilibrium stability are thereby discussed. The coexisting bifurcation behaviors in the two types of simple jerk systems are revealed by bifurcation plots, and the origin symmetry and scale proportionality are effectively demonstrated by phase plots and attraction basins. Moreover, hardware experimental measurements are performed, from which the captured results well validate the numerical simulations.

Two types of simple jerk circuits are unified through parallelly connecting two diode-switch-based series branches and a unified mathematical model with six kinds of nonlinearities is established. Especially, the origin symmetry and scale proportionality for the two types of simple jerk systems are discussed quantitatively. These jerk circuits are all simple and inexpensive, easy to be physically implemented, which are helpful to explore chaos-based engineering applications.

Unlike previous works, the significant values are that through unifying these two types of simple jerk systems, a unified mathematical model with six kinds of nonlinearities is established, upon which symmetrically scaled coexisting behaviors are numerically disclosed and experimentally demonstrated.

The purpose of this paper is to develop a simple chaotic circuit. The circuit can be fabricated by less discrete electronic components, within which complex dynamical behaviors can be generated.

A second-order non-autonomous inductor-free chaotic circuit is presented, which is obtained by introducing a sinusoidal voltage stimulus into the classical Wien-bridge oscillator. The proposed circuit only has two dynamic elements, and its nonlinearity is realized by the saturation characteristic of the operational amplifier in the classical Wien-bridge oscillator. After that, its dynamical behaviors are revealed by means of bifurcation diagram, Lyapunov exponent and phase portrait and further confirmed using the 0-1 test method. Moreover, an analog circuit using less discrete electronic components is implemented, and its experimental results are measured to verify the numerical simulations.

The equilibrium point located in a line segment varies with time evolution, which leads to the occurrence of periodic, quasi-periodic and chaotic behaviors in the proposed circuit.

Unlike the previously published works, the significant values of the proposed circuit with simple topology are inductor-free realization and without extra nonlinearity, which make the circuit can be used as a paradigm for academic teaching and experimental illustraction for chaos.

This study aims to investigate the safety and liability of autonomous vehicles (AVs), and identify the contributing factors quantitatively so as to provide potential insights on safety and liability of AVs.

The actual crash data were obtained from California DMV and Sohu websites involved in collisions of AVs from 2015 to 2021 with 210 observations. The Bayesian random parameter ordered probit model was proposed to reflect the safety and liability of AVs, respectively, as well as accommodating the heterogeneity issue simultaneously.

The findings show that day, location and crash type were significant factors of injury severity while location and crash reason were significant influencing the liability.

The results provide meaningful countermeasures to support the policymakers or practitioners making strategies or regulations about AV safety and liability.

The purpose of this paper is to determine: how much the residual curvature could be formed in sintered nano‐silver assembly when it is cooled to room temperature from the sintering temperature (normally 275°C); how the cyclic temperature load affects the residual curvature or stresses in sintered joint. Then the stress level and the reliability of sintered nano‐silver for high‐temperature applications can be understood.

5 mm * 2.5 mm silicon chip was bonded with 96 per cent Al₂O₃ substrate by sintering nanosilver paste. An optical system was developed to measure the curvature of the sintered assemblies. Reliability of the sintered assemblies was evaluated by temperature cycling of −40∼125°C. Finite element analysis was employed to simulate the behavior of the joint subjected to the temperature cycling from −40°C to 125°C by ANSYS. SEM images were taken to investigate the impact of temperature cycling on the reliability of sintered silver attachment.

This residual bending at room temperature was found concave towards the substrate (alumina) side. Also, with the bondline thickness increasing, the residual curvature decreases obviously. The severity of the residual bending in all the structures was mitigated to some extent with increasing number of cycles. There is no crack in the joint with the thickness of 25 μm. The drop of the residual curvature of the samples with bondline of 25 μm is caused mainly by stress relaxation in sintered silver before 300 cycles. Sample with thicker bondline is more susceptible to thermal cycling for the structure bonded with nanosilver than that with thinner bondline. The poor quality of bonding is due to the thicker sintered joint, which means that sintered nanosilver is not suitable for die‐attachment requiring thick bondline.

The paper describes: how a precise optical system was developed to measure the residual curvature of the sintered assemblies; how the evolution of the residual curvature of the sintered assembly with the temperature cycling was obtained by both experiment and simulation; and how microstructures of the sintered silver joint were analyzed for as‐sintered assembly and the sintered assembly after temperature cycling.

The purpose of this study is to examine the impact of chief executive officer (CEO) hometown identity on company audit fees in the Chinese setting.

This study uses data from Chinese public companies in the Shanghai Stock Exchange and the Shenzhen Stock Exchange for the period 2008–2019. This study investigates the impact path of CEO hometown identity on company audit fees and further examines the moderating role of internal and external governance level.

This study finds that CEO hometown identity is significantly and negatively related to company audit fees. In addition, CEO hometown identity can reduce audit fees by alleviating agency risk and litigation risk. Moreover, the negative effect of CEO hometown identity on audit fees is more pronounced in companies with a higher percentage of institutional investors shareholding and more analysts tracking quantity.

This study may provide new references for executives’ selection, auditors’ optimization decisions and regulators’ information disclosure system.

This study contributes to the literature by exploring the effect of CEO hometown identity on audit fees in the context of China.

The purpose of this paper is to study a fractional grey model FAGM(1,1,t^α) based on the GM(1,1,t^α) model and the fractional accumulated generating operation, and then predict the national health expenditure, the government health expenditure and the out-of-pocket health expenditure of China.

The presented univariate grey model is systematically studied by using the grey modelling technique, the fractional accumulated generating operation and the trapezoid approximation formula of definite integral. The optimal system parameters r and α are evaluated by the particle swarm optimisation algorithm.

The expressions of the time response function and the restored values of this model are derived. The GM(1,1), NGM(1,1,k,c) and GM(1,1,t^α) models are particular cases of the FAGM(1,1,t^α) model with deterministic r and α. Compared with other forecasting models, the results of the FAGM(1,1,t^α) model have higher precision.

The superiority of the new model has high potential to be used in the medicine and health fields and others. Results can provide a guideline for government decision making.

The univariate fractional grey model FAGM (1,1,t^α) successfully studies the China’s health expenditure.

Websites, search engines, recommender systems, artificial intelligence and digital libraries have the potential to support serendipity for unexpected interaction with information and ideas which would lead to favored information discoveries. This paper aims to explore the current state of research into serendipity particularly related to information encountering.

This study provides bibliometric review of 166 studies on serendipity extracted from the Web of Science. Two bibliometric analysis tools HisCite and RStudio (Biblioshiny) are used on 30 years of data. Citation counts and bibliographic records of the papers are assessed using HisCite. Moreover, visualization of prominent sources, countries, keywords and the collaborative networks of authors and institutions are assessed using RStudio (Biblioshiny) software. A total of 166 papers on serendipity were found from the period 1989 to 2022, and the most influential authors, articles, journals, institutions and countries among these were determined.

The highest numbers of 11 papers were published in the year 2019. Makri and Erdelez are the most influential authors for contributing studies on serendipity. “Journal of Documentation” is the top-ranking journal. University College London is the prominent affiliation contributing highest number of studies on serendipity. The UK and the USA are the prominent nations contributing highest number of research. Authorship pattern for research on serendipity reveals involvement of single author in majority of the studies. OA Green model is the most preferred model for archiving of research articles by the authors who worked on serendipity. In addition, majority of the research outputs have received a citation ranging from 0 to 50.

To the best of the authors’ knowledge, this paper may be the first bibliometric analysis on serendipity research using bibliometric tools in library and information science studies. The paper would definitely open new avenues for other serendipity researchers.