Search results

The purpose of this paper is to explore Chinese consumers’ motivations to purchase luxury fashion products in the UK and how far sustainability plays a role in the decision-making process, by extending the consumer typology of translators, exceptors, selectors. The authors further add an additional dimension to defining “luxury”.

An exploratory design utilising multiple qualitative research tools (semi-structured interviews, focus groups) provides the basis for this research. A grounded analysis was applied.

Findings map motivational drivers to purchasing luxury products and establish a fourth consumer type “indulgers”. Well-being further emerged as a key characteristic that defines “luxury”.

The sample size is limited to Chinese consumers purchasing luxury fashion in the UK, and thus may not be generalised.

This research helps managers to understand the consumer types and underlying motivations of Chinese consumers purchasing luxury fashion in the UK. As one of the largest target groups, this research informs managers on how to further capitalise on this market.

This paper creates a new consumer typology that not only categorises consumers according to their consumption aspects, but further identifies their underlying motivations to do so.

In view of the difficulty in determining the key parameters d in the Corten-Dolan model, based on the introduction of small loads, damage degrees and stress states to the Corten-Dolan model and the existing improved model, the sequential effects of the adjacent two-stage load were further considered.

Two improved Corten-Dolan models were established on the basis of modifying the parameter d by two different methods, namely, increasing stress ratio coefficient as well as considering the effects of loading sequence and damage degree as independent influencing factors respectively. According to the test data of the welded joints of common materials (standard 45 steel), alloy materials (standard 16Mn steel) and Q235B steel, the validity and feasibility of the above two improved models for fatigue life prediction were verified.

Results show that, compared with the traditional Miner model and the existing Corten-Dolan improved model, the two improved models have higher prediction accuracy in the fatigue life prediction of welding materials whether under two-stage load or multi-stage load.

Because the mathematical expressions of the models are relatively simple and need no multi-layer iterative calculation, it is convenient to predict the fatigue life of welded structure in practical engineering.

Aiming at the problems of poor accuracy and limitation in strength assessment of spot welding vehicle body caused by uncertain factors, such as key component size and nugget diameter, the numerical models of strength uncertainty analysis of spot-welded joints were constructed based on evidence theory and fuzzy theory.

Evidence theory and fuzzy theory are used to deal with the uncertainty of design parameter, and differential evolution algorithms are used to calculate the propagation process of uncertainty in this model. Furthermore, efficient relationship between the strength of welded joints and each design parameter is constructed by using response surface proxy model, which effectively avoids the problem of repeated complex finite element analysis in uncertainty analysis.

The results show that the constructed uncertainty numerical model is effective for the multiple uncertainties and give interval results under different probabilities and affiliations, which can more effectively evaluate the strength of the welded body structure to avoid overly conservative estimates for deterministic design.

The evidence theory is improved and combined with differential evolution algorithm and response surface method to effectively improve the computational efficiency. Based on the improved evidence theory and fuzzy algorithm, the numerical models for the uncertainty analysis of solder joint strength of welded structures are constructed and their feasibility is verified.

Urban water bodies play an important role in reducing summertime urban heat island (UHI) effects. Previous studies focused mainly on the impact of water bodies of large areas, and there is no analysis of the efficacy and scale effect of how small and medium-sized water bodies reduce the UHI effects. Hence, these studies could not provide theoretical support for the scientific planning and design of urban water bodies. This study aims to confirm, within different scale ranges, the efficacy of a water body in reducing the summertime UHI effects. We propose a scale sensitivity method to investigate the temporal and spatial relationship between urban water bodies and UHI. Based on the scale theory and geostatistical analysis method in landscape ecology, this study used the platforms of 3S, MATLAB, and SPSS to analyze the distance-decay law of water bodies in reducing summertime UHI effects, as well as the scale response at different water surface ratios. The results show that the influence of water surfaces on UHIs gradually decreases with increasing distance, and the temperature rises by 0.78 °C for every 100 m away from the water body. During daytime, there is a scaled sensitivity of how much water surfaces reduce the summertime UHI effects. The most sensitive radius from the water was found at the core water surface ratio of 200 m. A reduction of UHI intensity by 2.3 °C was observed for every 10% increase of the average core water surface ratio. This study provides a theoretical reference to the control of heat islands for the planning and design of urban water bodies.

For the difference of the change law of material memory performance and the influence of damage state on memory performance, this paper aims to establish a general model of fatigue damage accumulation based on dynamic residual S–N curve and material memory characteristics.

This paper introduces the material memory characteristics, combined with the residual S–N curve method, and uses the exponential decay function of the load cycle to construct the material memory performance function. While considering the damage state, the loading order can be fully considered. The parameter d in the function not only represents the variation of the material's memory property, but also considers the influence of the damage state.

According to the test data of welding joints of common materials, alloy materials and other materials, the validity and feasibility of the fatigue cumulative damage model constructed were verified. The numerical results show that under the grading load, the fatigue cumulative damage model can be used to predict the fatigue life of welded structures and has high prediction accuracy and more approximate to the actual experiment results. It can be directly applied to the fatigue life prediction and design of actual engineering welded structures.

The model not only considers the effect of damage state and loading order on damage accumulation, but also contains only one material parameter, which is easy to obtain. The prediction accuracy and engineering practicability of fatigue were significantly improved.

The purpose of this study is to develop a new approach for simulating the ion flow field with the floating conductors based on the existing inversion method.

The space charge keeps charging the floating conductors until the dynamic balance is reached. The corresponding floating potential boundary condition is linearized as the combination of the equipotential constraints and natural boundary condition, which can be directly imposed in the inversion process.

The numerical results demonstrate that the modified inversion algorithm performs well in the ion flow field with the floating conductors and the floating potential converges within five steps’ iterations. The proposed approach is applied to investigate the effect of the grounded line to the floating conductors in the practical high voltage direct current (HVDC) transmission lines.

The modified inverse algorithm provides a general way to deal with the Kapzov hypothesis and the floating boundary condition simultaneously within one loop, which can be applied to the multiphysics systems with different kinds of irregular boundary conditions.

This paper presents the findings of a visiting scholarship research that was carried out at the Faculty of Engineering, University of Technology Sydney, Australia. Based on the extensive literature review, government databases and international statistics, it introduces an analytical framework for comparison of the national innovation systems (NIS) of China and Australia in regards to their strengths and weaknesses. This is done through individual examination and comparison of functions of typical institutions involved in innovation to reveal the structural characteristics and performances of the two systems. The interactions among these institutions are then analysed to illustrate their dynamics and efficiency. The comparison has shown clearly that China’s NIS has several weaknesses and gaps due to its developing and transition stage. There are positive signs that Chinese Government has recognised the nature and scope of the problem and seems to work in the right direction. This paper aims to support this process by providing some recommendations that could help bridge the gaps between the NISs of China and Australia. Due to the fact that both, China’s and Australia’s NISs, have their unique characteristics but share numerous complementary features, there is a large potential for further cooperation between the two national innovation systems.

To prepare a new type of composite for selective laser sintering 3D printing, the surface of Al₂O₃ nanoparticles was modified by the coupling agent (3-methacryloxypropyl)-trimethoxy silane (KH570) before coated with thermoplastic epoxy resin (TER).

Laser diffraction confirmed that the size distribution of prepared powder materials in this study ranged between 20 to 80 µm. Thermogravimetric analysis (TGA) showed that the loading of organic matter was below 5 per cent. Fourier transform infrared spectroscopy indicated that the silane coupling agent molecule bound strongly with the alumina. X-ray diffraction confirmed the prepared powder materials to be α-alumina. Through the angle of repose (AOR) test, the AOR = 18.435º was obtained, suggesting the high flowability of prepared powder materials. Scanning electron microscopy (SEM) observation demonstrated that the shape of the prepared powder materials was sphere-like grains.

Molding properties of prepared powder materials were studied on the basis of particle size distribution, particle size, sphericity, crystal structure and the reaction mode of the TER. This prepared powder materials can be well applied to the production of epoxy resin-coated Al₂O₃ composite parts with high precision and good mechanical performance.

This composite can be well applied to the production of epoxy resin-coated Al₂O₃ composite parts with high precision and good mechanical performance.

Awe is an important yet largely overlooked emotion in tourism. This paper aims to reveal the underlying mechanism of the effects of nature-inspired awe on stimulating tourists' environmentally responsible behavior (TERB) intention by delving into the serial mediation effect of state construal level, small-self perception and state connectedness to nature (CNT).

This research was built upon the appraisal theory of emotion. Study 1 was a scenario-induced quasi-experimental study to test the proposed model linking awe, small-self perception, state CNT and TERB intention. A total of 271 valid questionnaires were collected via an online questionnaire platform. Study 2 was a field study designed to replicate the findings of Study 1 and further uncover the mediating role of the state construal level. Study 2 was conducted in Baiyun Mountain Scenic Area, China. A total of 229 valid questionnaires were used for analysis.

This research deepens our understanding of the effects of nature-inspired awe in the tourism and travel fields. This research uncovers the underlying mechanism by which awe increases TERB intention through serial mediation. Specifically, awe inspires tourists to apply a higher level of construal, which makes tourists perceive a smaller self, making them feel more connected to nature and exert more intention to adopt ERB.

This research linked tourists' mindset (i.e. state construal level), internal (i.e. small-self perception) and external (i.e. state CNT) cognition in an integrated model, explaining how nature-inspired awe contributes to eliciting TERB intention. The findings add critical theoretical contributions to the travel and tourism literature and provide important implications for the tourism industry to inspire awe and benefit from such emotion.

敬畏在旅游中是一种十分重要的情绪, 但却鲜少被关注。本研究旨在深入研究解释水平状态、小我感知和自然关联感的链式中介效应, 揭示自然敬畏激发游客环境责任行为意向的内在作用机制。

本研究的基础理论为情绪评价理论。研究一通过场景诱导的准实验研究, 检验将敬畏、小我感知、自然关联感和游客责任行为意向的假设模型; 研究一以网络问卷平台收集的271份有效问卷数据进行分析。研究二是一项在中国白云山风景区开展的实地研究, 旨在检验研究一的研究结果, 并进一步揭示解释水平状态的中介效应; 研究二采用229份有效问卷数据进行分析。

本研究揭示了敬畏通过链式中介作用影响游客环境责任行为意向的内在作用机制, 深化了对自然敬畏在旅游和旅行领域价值的理解。具体而言, 本研究发现敬畏激发了游客启动更高的解释水平, 这使游客感知到更渺小的自我, 并促使他们感到与自然的联系更加紧密, 从而提升了游客的环境责任行为意向。

本研究将游客的心理定式（即解释水平状态）、内在认知（即小我感知）和外部认知（即自然关联感）整合到一个综合模型中, 解释了自然敬畏引发游客环境责任行为意向的作用机制。研究结果为旅游研究提供了重要的理论贡献, 也为旅游行业如何在实践中激发敬畏感并从中获得效益提供了重要的实践启示。

El asombro es una emoción importante pero en gran medida ignorada en el turismo. Esta investigación pretende revelar el mecanismo subyacente de los efectos del asombro inspirado por la naturaleza en la estimulación de la intención del comportamiento responsable con el medio ambiente (TERB) de los turistas, profundizando en el efecto mediador en serie del nivel de interpretación del estado, la percepción del pequeño yo y la conexión del estado con la naturaleza (CNT).

Esta investigación se basó en la teoría de la valoración de la emoción. El estudio 1 fue un estudio cuasiexperimental inducido por escenarios para probar el modelo propuesto que vincula el sentimiento de asombro, la percepción del pequeño yo, el estado CNT y la intención TERB. Se recogieron 271 cuestionarios válidos a través de una plataforma de cuestionarios en línea. El Estudio 2 fue un estudio de campo diseñado para replicar los hallazgos del Estudio 1 y descubrir más a fondo el papel mediador del nivel de interpretación del estado. El estudio 2 se llevó a cabo en la zona escénica de la montaña de Baiyun (China). Se utilizó un total de 229 cuestionarios válidos para el análisis.

Esta investigación profundiza en nuestra comprensión de los efectos del asombro inspirado por la naturaleza en los ámbitos del turismo y los viajes. Esta investigación descubre el mecanismo subyacente por el que el asombro aumenta la intención de TERB a través de la mediación en serie. En concreto, el asombro inspira a los turistas a aplicar un mayor nivel de interpretación, lo que hace que los turistas perciban un yo más pequeño, lo que les hace sentirse más conectados con la naturaleza y ejercer así una mayor intención de adoptar TERB.

Esta investigación vinculó la mentalidad de los turistas (es decir, el nivel de nterpretación del estado), la cognición interna (es decir, la percepción de un yo más pequeño) y la externa (es decir, la CNT del estado) en un modelo integrado, explicando cómo el asombro inspirado por la naturaleza contribuye a suscitar la intención TERB. Los hallazgos añaden contribuciones teóricas críticas a la literatura sobre viajes y turismo y proporcionan implicaciones importantes para que la industria turística inspire asombro y se beneficie de dicha emoción.