Search results
1 – 4 of 4Kazimierz Drabczyk, Piotr Sobik, Zbigniew Starowicz, Katarzyna Gawlińska, Anna Pluta and Bogusław Drabczyk
The photovoltaic modules with front glass as a protective layer are the most popular type in the industry, but for some applications it can be considered as too heavy. One of the…
Abstract
Purpose
The photovoltaic modules with front glass as a protective layer are the most popular type in the industry, but for some applications it can be considered as too heavy. One of the approaches is to laminate the cells using PMMA [Poly(methyl methacrylate)] as the front layer. This polymer has good mechanical strength and optical properties but exhibits low adhesion to lamination foil. To increase adhesion between these two materials, PMMA surface treatment may be required.
Design/methodology/approach
To examine the PMMA treatment influence on the sample, adhesion samples’ surfaces were modified by grinding and laser cutting. Also two types of PMMA available in the market were tested, namely, smooth and satin types. The quality of lamination was determined using two methods, namely, tear test with recorded maximal tear force achieved for the samples, and environment chamber tests, in which the system resistance against the cyclic temperature variation was evaluated.
Findings
Additional treatment of the PMMA surface lead to increased adhesion of the lamination foil used. Ethylene-vinyl acetate foil in the PMMA system is sensitive to temperature variation, which can lead to system delamination, whereas polyvinyl butyral foil exhibits better environmental performance and even its adhesion to PMMA is lower.
Originality/value
This paper presents atypical surface modification methods that contributed to higher adhesion of lamination systems in glass-free solar modules. Glass front sheet and polymeric backsheet were replaced with PMMA. As the adhesion mechanism in the PMMA-lamination foil system differs from that in the traditional glass system, different PMMA surface treatments need to be evaluated.
Details
Keywords
Piotr Sobik, Radoslaw Pawlowski, Bartlomiej Pawlowski, Boguslaw Drabczyk and Kazimierz Drabczyk
The purpose of this paper is to present results of the studies on modification of ethylene-vinyl acetate (EVA) encapsulation foil to be used as thermal interface material (TIM)…
Abstract
Purpose
The purpose of this paper is to present results of the studies on modification of ethylene-vinyl acetate (EVA) encapsulation foil to be used as thermal interface material (TIM). It is estimated that poor thermal management in electronic devices can cause over 50 per cent of failures. As the junction temperature rises, the failure rate for electronics increases exponentially. To ensure sufficient heat transfer from its source, TIMs are used in various circuits. On the other hand, it is important to ensure high electric resistivity of the designed TIM.
Design/methodology/approach
The focus of the investigation was twofold: modification of EVA with both graphene oxide (GO) and silver nanopowder (nAg); and TIM applicability through lamination of photovoltaic cells with standard and modified EVA foil. The main problem of a new type of encapsulant is proper gas evacuation during the lamination process. For this reason, reference and modified samples were compared taking into account the percentage of gas bubbles in visible volume of laminated TIM. Finally, reference and modified TIM samples were compared using differential scanning calorimetry (DSC) and laser flash analysis (LFA) measurements.
Findings
The proper parameters of the lamination process for the modified EVA foil - with both GO and organometallic nAg particles - were selected. The nAg addition results in an increase in thermal conductivity of the proposed compositions with respect to unmodified EVA foil, which was confirmed by DSC and LFA measurements.
Originality/value
The experiments confirmed the potential application of both EVA foil as a matrix for TIM material and nAg with GO as an active agent. Proposed composition can bring additional support to a solar cell or other electronic components through effective heat removal, which increases its performance.
Details
Keywords
Piotr Sobik, Radosław Pawłowski, Anna Pluta, Olgierd Jeremiasz, Kazimierz Drabczyk, Grażyna Kulesza-Matlak and Paweł Antoni Zięba
The purpose of this paper is to investigate the behavior of interconnections between solar cells in a glass-free solar modules. As glass weight can be a limitation, it is still…
Abstract
Purpose
The purpose of this paper is to investigate the behavior of interconnections between solar cells in a glass-free solar modules. As glass weight can be a limitation, it is still interesting to investigate other types of systems, especially when the glass was replaced with a polymeric front sheet. Such systems can be more sensitive for the solar cell interconnection ribbon fatigue.
Design/methodology/approach
To examine this effect, the set of glass-based and glass-free modules were prepared using various ribbon thickness and treatment concerning its stretching or curving before lamination. Furthermore, additional reinforcement of the connection between the ribbon and the solar cell was proposed. The prepared modules were exposed to the cyclic temperature variation in the environment chamber. The number of cycles after which the interconnection maintains its conductivity was noted.
Findings
Changing the outer layers into more elastic ones requires additional care for the ribbon treatment because interconnections become more sensitive for a system relative displacement. To secure interconnection before fatigue an additional curving of ribbon between solar cells can be introduced whereas the best results were obtained for a system with aluminum plate laminated as an interlayer.
Originality/value
The paper presents a new system of a glass-free solar module based on epoxy-glass fiber composite as a backsheet. The glass front sheet was replaced with an elastic, transparent polymer. Such construction can be used in a system where the glass weight is a limitation. As glass has a structural function in traditional modules and limits fatigues of interconnections the proposed system requires additional ribbon treatment to preserve long module life-span.
Details
Keywords
Wojciech Filipowski, Kazimierz Drabczyk, Edyta Wróbel, Piotr Sobik, Krzysztof Waczynski and Natalia Waczynska-Niemiec
The purpose of this paper is to develop a method of preparing spray-on dopant solutions that enable obtaining a p+ region forming a back-surface field (BSF) during the diffusion…
Abstract
Purpose
The purpose of this paper is to develop a method of preparing spray-on dopant solutions that enable obtaining a p+ region forming a back-surface field (BSF) during the diffusion doping process. The spray-on method used allows to decrease the costs of dopant solution application, which is particularly significant for new low-cost production processes.
Design/methodology/approach
This paper presents steps of production of high concentration boron dopant solutions enabling diffusion doping of crystalline p-type silicon surfaces. To check the fabricated dopant solutions for stability and suitability for spray-on application, their viscosity and density were measured in week-long intervals. The dopant solutions described in this paper were used in a series of diffusion doping processes to confirm their suitability for BSF production.
Findings
A method of preparing dopant solutions with parameters enabling depositing them on silicon wafers by the spray-on method has been established. Due to hygroscopic properties of the researched dopant solutions, a maximum surrounding atmosphere humidity has been established. The solutions should not be applied by the spray-on method, if this humidity value is exceeded. The conducted derivatographic examination enabled establishing optimal drying conditions.
Originality/value
The paper presents a new composition of a dopant solution which contains high concentration of boron and may be applied by the spray-on method. Derivatographic examination results, as well as equations describing the relation between dopant solution density and viscosity and storage time are also original for this research. The established dependencies between the sheet resistance of the fabricated BSF and the diffusion doping time are other new elements described in the paper.
Details