Okka Adiyanto, Pandu Sandi Pratama and Wonsik Choi
This paper aims to examine the friction coefficient and wear rate characteristics of SCM 440 bearing steel used in the cylinder block of a tractor engine with gas lubrication and…
Abstract
Purpose
This paper aims to examine the friction coefficient and wear rate characteristics of SCM 440 bearing steel used in the cylinder block of a tractor engine with gas lubrication and oil lubrication.
Design/methodology/approach
Friction tests were performed using a pin-on-disc tester with loads of 2 to 10 N and sliding velocities of 0.06 to 0.34 m/s. The experiment was done with and without nitrogen, and paraffin oil lubricant was used to prevent wear during process.
Findings
The nondimensional characteristic number from the Stribeck curves indicated that the lubrication regime is hydrodynamic. As the velocity and load increased, the friction coefficient of the SCM 440 increased and greater applied load resulted in a smaller friction coefficient. The range of the friction coefficient was 0.017001 to 0.092904 with paraffin oil lubrication and 0.01614 to 0.4555 with nitrogen lubrication. Nitrogen is effective in reducing the friction coefficient of materials that are in contact and subjected to a load and velocity.
Originality/value
The experiments confirm that nitrogen is effective for reducing the friction coefficient of SCM 440 materials that are in contact with each other and subjected to a load and velocity.