Search results

Perhaps no other topic was given so much attention in the Kuwaiti socio‐political, economic literature as that of human resources. This is so for a number of reasons. First, Kuwait being a small economy cannot survive on its own labor force. Foreign labor helps the country but has some serious consequences. The imported labor force is very cheap compared to national labor. This had resulted in a malallocation of manpower in various sectors of the economy. Secondly, Kuwait, like many Muslim Gulf societies, does not fully utilize its female labor force; and thirdly, there are problems regarding the attitudes of Kuwaitis towards labor of particular types. In addition, there are many challenges in the area of human resources that the country faces as it moves into the 21st century.

This study aims to empirically analyze the symmetries and asymmetries among the critical factors affecting building information modeling (BIM) implementation between countries with different income levels. To achieve that aim, the study objectives are to identify: critical factors affecting BIM implementation in low-, lower-middle-, upper-middle- and high-income countries; overlapping critical factors between countries with different income levels; and agreements on the critical factors between countries with different income levels.

This study identified potential BIM implementation factors using a systematic literature review and semi-structured interviews with architectural, engineering and construction (AEC) professionals. Then, the factors were inserted into a questionnaire survey and sent to AEC professionals in Afghanistan, India, Malaysia and Saudi Arabia. The collected data was analyzed using the following techniques and tests: mean, standard deviation, normalized value, Kruskal–Wallis, Dunn and Mann–Whitney.

Five critical factors overlap between all countries: “availability of guidelines for implementing BIM,” “cost-benefit of implementing BIM,” “stakeholders’ willingness to learn the BIM method,” “consistent views on BIM between stakeholders” and “existence of standard contracts on liability and risk allocation.” Also, the criticality of the factors often differs between income levels, especially between low- and high-income countries, suggesting a significant gap between low- and high-income countries in BIM implementation.

This study differs from prior works by empirically analyzing the symmetries and asymmetries in BIM implementation factors between countries with different income levels (i.e. low-, lower-middle-, upper-middle- and high-income countries).

The purpose of this study is to determine the distraction factors based on their contributions in affecting seafarers’ physical and psychological well-being.

A systematic average mean value technique incorporated with quantitative data collection is applied to determine the contributions of the involved factors in establishing the distraction problems among seafarers.

Element of “Food and nutrition” is recorded as the highest contributing factor to Malaysian seafarers, for deck and engine department, respectively, in establishing the distraction-related problem among five other factors involved.

This paper is only providing a scope of knowledge regarding the contribution of potential distraction factors existing on board the offshore ships. However, the potential distraction factors and their contributions, respectively, are very dynamic and may vary, depending on the situation of a particular area and who are being involved.

The result assists the shipping industry in recognizing the actual causes of the occurrences of marine casualties and incidents related to human factors.

The benefits are addressed to seafarers’ community where their well-being and work performances could be enhanced, thus reducing the occurrences of marine casualties and incidents. Local community at the shores also will be less threatened by marine pollution caused by the accidents of ships at sea.

The result provides a scope of knowledge regarding distraction-related factors in shipboard operation and also the introduction to a systematic assessment approach to determine and rank the parameters by using the systematic average mean value technique which is also a straightforward method and can be applied in any other circumstances.

This study examines the underlying relationships between the critical factors of building information modeling (BIM) implementation and the factors' groupings among architecture, engineering and construction (AEC) organizations in Saudi Arabia. The objectives of the study are to (1) identify the critical factors for BIM implementation, (2) analyze the interrelationships between the critical factors and (3) compare the critical factors between the different organizational characteristics.

First, potential factors were identified through a systematic literature review and interviews with AEC professionals. Then, a questionnaire survey was sent to AEC professionals and the collected data were analyzed using the following techniques and tests: mean score ranking, standard deviation, normalized value, factor analysis (FA), analysis of variance (ANOVA) and post-hoc Tukey test.

The analyses show that 14 factors are critical for BIM implementation in Saudi Arabia. The top critical factors include the existence of standard contracts on data security and user confidentiality, consistent views on BIM among stakeholders and the availability of guidelines for implementing BIM. Of the 14 critical factors, 9 can be grouped into 4 underlying factors: environmental, governmental, legal and organizational. The analysis shows that the criticality of the most critical factors grouped by the FA varies between different levels of BIM competency. Finally, the presence of public–private partnerships (PPPs) in realizing BIM projects is a new and emerging critical factor for BIM implementation in Saudi Arabia.

This study differs from prior works on BIM implementation in Saudi Arabia by using FA to explore the underlying relationships among factors of BIM implementation and the factors' groupings. Based on the FA results, a roadmap for implementing the BIM was developed. These findings will help to purposefully and efficiently customize BIM implementation strategies and initiatives to ensure successful BIM implementation in Saudi Arabia.

Regular monitoring of bacteria, especially Escherichia coli, in wastewater is crucial to ensure the maintenance of public health. Amperometric detection proves to be a fast, sensitive and economically viable solution for E. coli enumeration. This paper reported a prototype amperometric sensor based on PANI-ZnO-NiO nanocomposite thin films prepared by sol–gel method and irradiated with gamma ray. The purpose of this study is to investigate the sensor performance of PANI-ZnO-NiO nanocomposite thin films to detect E. coli in water.

The films were varied with different compositions of ZnO and NiO by using the formula PANI-(ZnO)_1-x-(NiO)_x, with x = 0.2, 0.4, 0.6 and 0.8. PANI-ZnO-NiO nanocomposite thin films were characterized by using X-ray diffraction (XRD) and atomic force microscopy (AFM) to study the crystallinity and surface morphology of the films. The sensor performance was conducted using the current–voltage (I-V) measurement by testing the films in clean water and E. coli solution.

XRD diffractograms show the peaks of ZnO (1 0 0) and NiO (1 0 2). AFM analysis shows the surface roughness, and the grain size of PANI-ZnO-NiO thin films decreases when the concentration ratios of NiO increased. I-V curves show the difference in current flow, where the current in E. coli solution is higher than the clean water.

PANI-(ZnO)_1-x-(NiO)_x nanocomposite thin film with the highest concentration of ZnO performed the highest sensitivity among the other concentrations, which can be used to indicate the presence of E. coli bacteria in water.

The paper aims to investigate the relationship between supply chain quality management (SCQM) practices and organisational performance as well as the role of knowledge transfer (KT) and SCQM capabilities in mediating the SCQM practices–organisational performance relationship. Precisely, this study tried to examine how effective are SCQM practices in enhancing SCQM capabilities, KT processes and to illuminate the role both of SCQM capabilities and KT processes in improving a firm’s innovation and operational performance (OP).

This paper applied a quantitative method in which data were collected from a survey with 152 firms functioning in the most pollutant manufacturing sectors (i.e. food, construction, chemical and pharmaceutical sectors) in Palestine. The data analysis was conducted using the partial least squares structural equation modelling.

This paper provides empirical insights into how to enhance organisational performance via SCQM capabilities and KT. In addition, this study contributes to the conceptualisation of SCQM, involving quality combination capability, supply chain responsiveness capability, quality knowledge sharing capability and provides the managers the ability to train themselves regarding the SCQM with its implication.

Because of the chosen research approach, the research results may lack generalisability. Therefore, researchers are encouraged to test the proposed propositions further. Practical implications – this paper includes implications for the improvement of SCQM capabilities, the manufacturing organisations should concentrate on establishing modern information technology.

This paper includes implications for the improvement of SCQM capabilities, the manufacturing organisations should concentrate on establishing modern information technology.

This paper proposes a conceptual framework that tests the combined effect of SCQM practices, SCQM capabilities and KT on innovation and OP from a developing country perspective.

According to the literature concerned with this study, less than satisfactory outcomes have been achieved through implementing business process improvements methods (BPIMs) in industries, in general, and in healthcare, in particular. The existing methods used need to be enhanced in order to create more effective outcomes. There has also been a lack of studies documenting gaps or shortfalls in implementing BPIMs, to be presented to the BPI research community. Therefore, researchers of this paper have attempted to fill gaps between theory and practice. On the contrary, there is also a need to link practical outcomes in the healthcare domain with those of the BPI research community. The purpose of this paper is to review popular BPIMs, techniques and tools applied in the healthcare domain; it seeks to examine and highlight their significant roles, clarify their pros and cons, and find opportunities to enhance their impact on the achievement of more sustainable improvements in the healthcare domain.

This study has been carried out by using a methodology combining an in-depth literature review with a comparison framework, which is called as the “Framework for Comparing Business Process Improvement Methods.” The framework is composed of seven dimensions and has been adapted from four recognized, related frameworks. In addition to the in-depth review of related literature and the adapted comparison framework, researchers have conducted several interviews with healthcare BPI practitioners in different hospitals, to attain their opinions of BPI methods and tools used in their practices.

The main results have indicated that significant improvements have been achieved by implementing BPIMs in the healthcare domain according to related literature. However, there were some shortfalls in the existing methods that need to be resolved. The most important of these has been the shortfall in representing and analyzing targeted domain knowledge during improvement phases. The tool currently used for representing the domain, specifically flowcharts, is very abstract and does not present the domain in a clear form. The flowchart tool also fails to clearly present the separation of concerns between business processes and the information systems processes that support a business in a given domain.

The findings of this study can be useful for BPI practitioners and researchers, mainly within the healthcare domain. The findings can help these groups to understand BPIMs shortfalls and encourage them to consider how BPIMs can be potentially improved.

This researchers of this paper have proposed a comparison framework for highlighting popular BPIMs in the healthcare domain, along with their uses and shortfalls. In addition, they have conducted a deep literature review based on the practical results obtained from different healthcare institutions implementing unique BPIMs around the world. There has also been valuable interview feedback attained from BPI leaders of specific hospitals in Saudi Arabia. This combination is expected to contribute to knowledge of BPIMs from both theoretical and practical points of view.

This present study uses political, economic, social, technological, legal and environmental (PESTLE) analysis and the strategic management theory to examine how external factors, namely the coronavirus (COVID-19) pandemic, the industrial revolution (IR) 4.0 technologies, the fuel price crisis and Sultanate of Oman Logistics Strategy (SOLS) 2040, affect the performance of container terminals in Oman.

A hybrid decision-making method that combined the analytical hierarchy process technique and Bayesian network model was used to achieve the objective of the present study.

The COVID-19 pandemic (54.60%) most significantly affected the performance of container terminals in Oman, followed by IR 4.0 technologies (19.66%), SOLS (17.00%) and fuel price crisis (8.74%). Container terminals in Oman were also found to perform “moderately,” considering the uncertainty of external factors.

This study enriches existing literature by using PESTLE analysis to assess the impact of the external business environment on firm performance in the context of the maritime industry as well as highlights how challenging external environmental factors affect the performance of container terminals in Oman.

This study contributes to developing novel study models and determining the performance level of container terminals in Oman considering integrated uncertainties and external factors such as the COVID-19 pandemic, IR 4.0 technologies, the SOLS 2040 and the fuel price crisis.

The unity of Divine Law is reflected in monotheistic faiths having their origin with Prophet Abraham (pbuh), but later divided into three major religions: Judaism, Christianity, and Islam. There is a unity of Divine practice in a variety of areas among these monotheistic faiths. One such area is Zakah, in Islamic tradition, and often characterized as “the poor due” in Christianity and Judaism. By whatever name, Zakah or “the poor due,” is an important Divine institution in all three monotheistic faiths. The purpose of this paper is to trace and examine the development of the Zakah institution and Zakah type coverage in those faiths.

First, the paper provides a brief description of the meaning and objectives of Zakah (the poor due) and the group of people who have been described as worthy to receive Zakah. Additional sections trace the development of Zakat (the poor due) in Islam, Judaism, and Christianity. Finally, some conclusions are presented for the consideration of the reader.

The administration and process for distribution of Zakah in contemporary Muslim states varies depending on the school of Islamic thought most prevalent in that society and the level of theocratic involvement of the government in those societies.

This paper usefully examines the development of the Zakah institution and Zakah type coverage in the three monotheistic faiths.

This study employs Stein Rokkan's methodological approach to analyse state formation in the Greater Middle East. It develops a conceptual framework distinguishing colonial, populist and democratic pacts, suitable for analysis of state formation and nation-building through to the present period. The framework relies on historical institutionalism. The methodology, however, is Rokkan's. The initial conceptual analysis also specifies differences between European and the Middle Eastern state formation processes. It is followed by a brief and selective discussion of historical preconditions. Next, the method of plotting singular cases into conceptual-typological maps is applied to 20 cases in the Greater Middle East (including Afghanistan, Iran and Turkey). For reasons of space, the empirical analysis is limited to the colonial period (1870s to the end of World War 1). Three typologies are combined into one conceptual-typological map of this period. The vertical left-hand axis provides a composite typology that clarifies cultural-territorial preconditions. The horizontal axis specifies transformations of the region's agrarian class structures since the mid-19th century reforms. The right-hand vertical axis provides a four-layered typology of processes of external intervention. A final section presents selected comparative case reconstructions. To the authors' knowledge, this is the first time such a Rokkan-style conceptual-typological map has been constructed for a non-European region.