Search results

1 – 2 of 2
Per page
102050
Citations:
Loading...
Access Restricted. View access options
Article
Publication date: 13 November 2017

Misael Lopez-Ramirez, Rene J. Romero-Troncoso, Daniel Moriningo-Sotelo, Oscar Duque-Perez, David Camarena-Martinez and Arturo Garcia-Perez

About 13 to 44 per cent of motor faults are caused by bearing failures in induction motors (IMs), where lubrication plays a significant role in maintaining rotating equipment…

211

Abstract

Purpose

About 13 to 44 per cent of motor faults are caused by bearing failures in induction motors (IMs), where lubrication plays a significant role in maintaining rotating equipment because it minimizes friction and prevents wear by separating parts that move next to each other, and more than 35 per cent of bearing failures can be attributed to improper lubrication. An excessive amount of grease causes the rollers or balls to slide along the race instead of turning, and the grease will actually churn. This churning action will eventually wear down the base oil of the grease and all that will be left to lubricate the bearing is a thickener system with little or no lubricating properties. The heat generated from the churning, insufficient lubricating oil will begin to harden the grease, and this will prevent any new grease added to the bearing from reaching the rolling elements, with the consequence of bearing failure and equipment downtime. Regarding the case of grease excess in bearings, this case has not been sufficiently studied. This work aims to present an effective methodology applied to the detection and automatic classification of mechanical bearing faults and bearing excessively lubricated conditions in an IM through the Margenau-Hill distribution (MHD) and artificial neural networks (ANNs), where the obtained results demonstrate the correct classification of the studied cases.

Design/methodology/approach

This work proposed an effective methodology applied to the detection and automatic classification of mechanical bearing faults and bearing excessively lubricated conditions in an IM through the MHD and ANNs.

Findings

In this paper, three cases of study for a bearing in an IM are studied, detected and classified correctly by combining some methods. The marginal frequency is obtained from the MHD, which in turn is achieved from the stator current signal, and a total of six features are estimated from the power spectrum, and these features are forwarded to the designed ANN with three output neurons, where each one represents a condition in the IM: healthy bearing, mechanical bearing fault and excessively lubricated bearing.

Practical implications

The proposed methodology can be applied to other applications; it could be useful to use a time–frequency representation through the MHD for obtaining the energy density distribution of the signal frequency components through time for analysis, evaluation and identification of faults or conditions in the IM for example; therefore, the proposed methodology has a generalized nature that allows its application for detecting other conditions or even multiple conditions under different working conditions by a proper calibration.

Originality/value

The lubrication plays a significant role in maintaining rotating equipment because it minimizes friction and prevents wear by separating parts that move next to each other, and more than 35 per cent of bearing failures can be attributed to improper lubrication and it negatively affects the efficiency of the motor, resulting in higher operating costs. Therefore, in this work, a new methodology is proposed for the detection and automatic classification of mechanical bearing faults and bearing excessively lubricated conditions in an IM through the MHD and ANNs. The proposed methodology uses a total of six features estimated from the power spectrum, and these features are sent to the designed ANN with three output neurons, where each one represents a condition in the IM: healthy bearing, mechanical bearing fault and excessively lubricated bearing. From the obtained results, it was demonstrated that the proposed approach achieves higher classification performance, compared to short-time Fourier transform, Gabor transform and Wigner-Ville distribution methods, allowing to identify mechanical bearing faults and bearing excessively lubricated conditions in an IM, with a remarkable 100 per cent effectiveness during classification for treated cases. Also, the proposed methodology has a generalized nature that allows its application for detecting other conditions or even multiple conditions under different working conditions by a proper calibration.

Details

Industrial Lubrication and Tribology, vol. 69 no. 6
Type: Research Article
ISSN: 0036-8792

Keywords

Access Restricted. View access options
Article
Publication date: 22 October 2019

Yuri Merizalde, Luis Hernández-Callejo, Oscar Duque-Pérez and Víctor Alonso-Gómez

Despite the wide dissemination and application of current signature analysis (CSA) in general industry, CSA is not commonly used in the wind industry, where the use of vibration…

542

Abstract

Purpose

Despite the wide dissemination and application of current signature analysis (CSA) in general industry, CSA is not commonly used in the wind industry, where the use of vibration signals predominates. Therefore, the purpose of this paper is to review the use of generator CSA (GCSA) in the online fault detection and diagnosis of wind turbines (WTs).

Design/methodology/approach

This is a bibliographical investigation in which the use of GCSA for the maintenance of WTs is analyzed. A section is dedicated to each of the main components, including the theoretical foundations on which GCSA is based and the methodology, mathematical models and signal processing techniques used by the proposals that exist on this topic.

Findings

The lack of appropriate technology and mathematical models, as well as the difficulty involved in performing actual studies in the field and the lack of research projects, has prevented the expansion of the use of GCSA for fault detection of other WT components. This research area has yet to be explored, and the existing investigations mainly focus on the gearbox and the doubly fed induction generator; however, modern signal treatment and artificial intelligence techniques could offer new opportunities in this field.

Originality/value

Although literature on the use of GCSA for the detection and diagnosis of faults in WTs has been published, these papers address specific applications for each of the WT components, especially gearboxes and generators. For this reason, the main contribution of this study is providing a comprehensive vision for the use of GCSA in the maintenance of WTs.

Details

Journal of Quality in Maintenance Engineering, vol. 26 no. 3
Type: Research Article
ISSN: 1355-2511

Keywords

1 – 2 of 2
Per page
102050