Search results

1 – 1 of 1
Per page
102050
Citations:
Loading...
Access Restricted. View access options
Article
Publication date: 11 September 2018

Okka Adiyanto, Pandu Sandi Pratama and Wonsik Choi

This paper aims to examine the friction coefficient and wear rate characteristics of SCM 440 bearing steel used in the cylinder block of a tractor engine with gas lubrication and…

150

Abstract

Purpose

This paper aims to examine the friction coefficient and wear rate characteristics of SCM 440 bearing steel used in the cylinder block of a tractor engine with gas lubrication and oil lubrication.

Design/methodology/approach

Friction tests were performed using a pin-on-disc tester with loads of 2 to 10 N and sliding velocities of 0.06 to 0.34 m/s. The experiment was done with and without nitrogen, and paraffin oil lubricant was used to prevent wear during process.

Findings

The nondimensional characteristic number from the Stribeck curves indicated that the lubrication regime is hydrodynamic. As the velocity and load increased, the friction coefficient of the SCM 440 increased and greater applied load resulted in a smaller friction coefficient. The range of the friction coefficient was 0.017001 to 0.092904 with paraffin oil lubrication and 0.01614 to 0.4555 with nitrogen lubrication. Nitrogen is effective in reducing the friction coefficient of materials that are in contact and subjected to a load and velocity.

Originality/value

The experiments confirm that nitrogen is effective for reducing the friction coefficient of SCM 440 materials that are in contact with each other and subjected to a load and velocity.

Details

Industrial Lubrication and Tribology, vol. 70 no. 8
Type: Research Article
ISSN: 0036-8792

Keywords

1 – 1 of 1
Per page
102050