Search results

1 – 10 of 642
Per page
102050
Citations:
Loading...
Access Restricted. View access options
Article
Publication date: 3 February 2020

Ye Tian, Heng Fang, Ning Ren, Chao Qiu, Fan Chen and Suresh Sitaraman

This paper aims to assess precise correlations between intermetallic compounds (IMCs) microstructure evolutions and the reliability of micro-joints with a Cu/SAC305solder/Ni…

145

Abstract

Purpose

This paper aims to assess precise correlations between intermetallic compounds (IMCs) microstructure evolutions and the reliability of micro-joints with a Cu/SAC305solder/Ni structure using thermal shock (TS) tests.

Design/methodology/approach

This paper uses 200-µm pitch silicon flip chips with nickel (Ni) pads and stand-off height of approximately 60 µm, assembled on substrates with copper (Cu) pads. After assembly, the samples were subjected to air-to-air thermal shock testing from 55 to 125 per cent. The transfer time was less than 5 s, and the dwell time at each temperature extreme was 15 min. To investigate the microstructure evolution and crack growth, two samples were removed from the thermal shock chamber at 0, 400, 1,200, 2,000, 5,800 and 7,000 cycles.

Findings

The results showed that one (Cu, Ni)6Sn5/(Ni, Cu)3Sn4 dual-layer structure formed at the Ni pad interface of chip side dominates the micro-joints failure. This is because substantial (Ni, Cu)3Sn4 grain boundaries provide a preferential pathway for the catastrophic crack growth. Other IMCs microstructure evolutions that cause the prevalent joints failure as previously reported, i.e. thickened interfacial (Cu, Ni)6Sn5 and Ni3P layer, and coarsened IMCs inside the solder matrix, only contributed to the occurrence of fine cracks. Moreover, the typical interfacial IMCs spalling triggered by thermally induced stress did not take place in this study, showing a positive impact in the micro-joint reliability.

Originality/value

As sustained trends toward multi-functionality and miniaturization of microelectronic devices, the joints size is required to be constantly scaled down in advanced packages. This arises a fact that the reliability of small-size joints is more sensitive to the IMCs because of their high volume proportion and greatly complicated microstructure evolutions. This paper evaluated precise correlations between IMCs microstructure evolutions and the reliability of micro-joints with a Cu/SAC305solder/Ni structure using TS tests. It found that one (Cu, Ni)6Sn5/(Ni, Cu)3Sn4 dual-layer structure formed at the Ni pad interface dominate the micro-joints failure, whereas other IMCs microstructure evolutions that cause the prevalent joints failure exhibited nearly negligible effects.

Access Restricted. View access options
Book part
Publication date: 2 April 2021

Shuhan Chen and Peter Lunt

Abstract

Details

Chinese Social Media
Type: Book
ISBN: 978-1-83909-136-0

Access Restricted. View access options
Book part
Publication date: 19 July 2024

Kwadwo Asante, Petr Novak and Michael Adu Kwarteng

Environmental sustainability orientation has emerged to drive firms into eco-friendly production. Yet, the consequence of this new strategic thinking on firms’ green innovations…

Abstract

Environmental sustainability orientation has emerged to drive firms into eco-friendly production. Yet, the consequence of this new strategic thinking on firms’ green innovations, especially small- and medium-scale enterprises (SMEs), remains unresolved. Recognizing that the connection between environmental sustainability orientation and green innovation may not always be direct, the study theorizes that dynamic capability and entrepreneurial orientation may form part of the boundary conditions that strengthen its effect on small enterprises’ green innovation. The study adjoins the dynamic capability theory with the entrepreneurial orientation theory to test this relationship among small businesses within a developing economy. Results from the partial least squares–structural equation modeling (PLS-SEM) suggest that environmental sustainability orientation will result in green innovation when the SME’s dynamic capability can develop a creative reconfiguration of knowledge and new distinctive resources to support this new strategic direction. Similarly, findings from the study suggest that environmental sustainability orientation will translate into better green innovation outcomes when the SME entrepreneurial orientation has a solid attraction to protect the ecosystem and does not perceive green innovation as a risky enterprise.

Details

Sustainable and Resilient Global Practices: Advances in Responsiveness and Adaptation
Type: Book
ISBN: 978-1-83797-612-6

Keywords

Access Restricted. View access options
Article
Publication date: 1 June 2005

Li‐teh Sun

Man has been seeking an ideal existence for a very long time. In this existence, justice, love, and peace are no longer words, but actual experiences. How ever, with the American…

829

Abstract

Man has been seeking an ideal existence for a very long time. In this existence, justice, love, and peace are no longer words, but actual experiences. How ever, with the American preemptive invasion and occupation of Afghanistan and Iraq and the subsequent prisoner abuse, such an existence seems to be farther and farther away from reality. The purpose of this work is to stop this dangerous trend by promoting justice, love, and peace through a change of the paradigm that is inconsistent with justice, love, and peace. The strong paradigm that created the strong nation like the U.S. and the strong man like George W. Bush have been the culprit, rather than the contributor, of the above three universal ideals. Thus, rather than justice, love, and peace, the strong paradigm resulted in in justice, hatred, and violence. In order to remove these three and related evils, what the world needs in the beginning of the third millenium is the weak paradigm. Through the acceptance of the latter paradigm, the golden mean or middle paradigm can be formulated, which is a synergy of the weak and the strong paradigm. In order to understand properly the meaning of these paradigms, however, some digression appears necessary.

Details

International Journal of Sociology and Social Policy, vol. 25 no. 6/7
Type: Research Article
ISSN: 0144-333X

Keywords

Access Restricted. View access options
Article
Publication date: 1 April 2005

Li‐teh Sun

Man has been seeking an ideal existence for a very long time. In this existence, justice, love, and peace are no longer words, but actual experiences. How ever, with the American…

814

Abstract

Man has been seeking an ideal existence for a very long time. In this existence, justice, love, and peace are no longer words, but actual experiences. How ever, with the American preemptive invasion and occupation of Afghanistan and Iraq and the subsequent prisoner abuse, such an existence seems to be farther and farther away from reality. The purpose of this work is to stop this dangerous trend by promoting justice, love, and peace through a change of the paradigm that is inconsistent with justice, love, and peace. The strong paradigm that created the strong nation like the U.S. and the strong man like George W. Bush have been the culprit, rather than the contributor, of the above three universal ideals. Thus, rather than justice, love, and peace, the strong paradigm resulted in in justice, hatred, and violence. In order to remove these three and related evils, what the world needs in the beginning of the third millenium is the weak paradigm. Through the acceptance of the latter paradigm, the golden mean or middle paradigm can be formulated, which is a synergy of the weak and the strong paradigm. In order to understand properly the meaning of these paradigms, however, some digression appears necessary.

Details

International Journal of Sociology and Social Policy, vol. 25 no. 4/5
Type: Research Article
ISSN: 0144-333X

Keywords

Access Restricted. View access options
Article
Publication date: 18 June 2024

Victoria Gurieva, Anastasia Ilyina, Sergey Klyuev, Magomed Saidumov, Tolya Khezhev, Igor Nedoseko, Roman Fediuk, Vitaly Shamanov and Batyr Yazyev

The study suggests that the high concentration of mining and metallurgical enterprises on the territory of the Russian Ural region determines the need to consider industrial…

26

Abstract

Purpose

The study suggests that the high concentration of mining and metallurgical enterprises on the territory of the Russian Ural region determines the need to consider industrial waste, including nickel slag, as a possible raw material for the production of ceramic bricks. The article describes the properties of clays and nickel slag obtained at metallurgical enterprises in the Orenburg region and the features of their use as components in the composition of ceramic bricks.

Design/methodology/approach

To achieve this purpose, such tasks as determining the technological parameters of production, conducting the X-ray phase and microstructural analysis of the obtained samples were solved.

Findings

Compositions of ceramic mass using clay from the Khalilovsky deposit (Orenburg region) with the addition of nickel slag (20 and 40% by weight) have been developed, and their physical and mechanical properties (compressive strength, bending strength, water absorption and density) have been determined. With the help of modern research methods involving high-tech equipment, the microstructure is considered and the phase composition of the finished samples is determined. As a result of the conducted research, it was found that the composition of the selected clay and nickel slag in the obtained rational composition ensures the production of ceramic bricks of grades M175 and M200.

Originality/value

This is the first study on the use of nickel slag for the production of ceramic bricks. The results relate primarily to Russian feedstocks, but a methodology is presented that can be applied to other countries as well as to other silica-containing feedstocks.

Details

International Journal of Building Pathology and Adaptation, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 2398-4708

Keywords

Access Restricted. View access options
Article
Publication date: 4 February 2022

Lin Yang, Jiaming Lou, Junuo Zhou, Xianbo Zhao and Zhou Jiang

With multiple-related organizations, worldwide infections, deep economic recession and public disorder, and large consumption amount of anti-epidemic resources, the coronavirus…

642

Abstract

Purpose

With multiple-related organizations, worldwide infections, deep economic recession and public disorder, and large consumption amount of anti-epidemic resources, the coronavirus disease 2019 (COVID-19) has been defined as a public health emergency of international concern (PHEIC). Nowadays, Wuhan has recovered from the pandemic disaster and reentered normalization. The purposes of this study are to (1) summarize organization collaboration patterns, successful experience and latent defects under across-stage evolution of Wuhan's cooperation governance mode against the pandemic, and on the basis, (2) reveal how the COVID-19 development trends and organizations' collaborative behaviors affected each other.

Design/methodology/approach

Detailed content analysis of online news reports covering COVID-19 prevention and control measures on the website of Wuhan Municipal Government was adopted to identify organizations and their mutual collaborative interrelationships. Four complex network (CN) models of organization collaboration representing the outbreak, preliminary control, recession and normalization stages, respectively, were established then. Time-span-based dynamic parameter analyses of the proposed networks, comprising network cohesiveness analysis and node centrality analysis, were undertaken to indicate changes of global and local characteristics in networks.

Findings

First, the definite collaborative status of Wuhan Headquarters for Pandemic Prevention and Control (WHPPC) has persisted throughout the period. Medical institutions and some other administrations were the most crucial participants collaborating with the WHPPC. Construction-industry organizations altered pandemic development trends twice to make the situation controllable. Media, large-scale enterprises, etc. set about underscoring themselves contributions since the third stage. Grassroots cadres and healthcare force, small and medium-sized enterprises (SMEs), financial institutions, etc. were essential collaborated objects. Second, four evolution mechanisms of organization collaboration responding to the COVID-19 in Wuhan has been proposed.

Research limitations/implications

First, universality of Wuhan-style governance experience may be affected. Second, the stage-dividing process may not be the most appropriate. Then, data source was single and link characteristics were not considered when modeling.

Practical implications

This study may offer beneficial action guidelines to governmental agencies, the society force, media, construction-industry organizations and the market in other countries or regions suffering from COVID-19. Other organizations involved could also learn from the concluded organizations' contributions and four evolution mechanisms to find improvement directions.

Originality/value

This study adds to the current theoretical knowledge body by verifying the feasibility and effectiveness of investigating cooperation governance in public emergencies from the perspectives of analyzing the across-stage organization collaboration CNs.

Details

Engineering, Construction and Architectural Management, vol. 30 no. 8
Type: Research Article
ISSN: 0969-9988

Keywords

Access Restricted. View access options
Article
Publication date: 1 February 2000

Yaw A. Debrah and Ian G. Smith

Presents over sixty abstracts summarising the 1999 Employment Research Unit annual conference held at the University of Cardiff. Explores the multiple impacts of globalization on…

11599

Abstract

Presents over sixty abstracts summarising the 1999 Employment Research Unit annual conference held at the University of Cardiff. Explores the multiple impacts of globalization on work and employment in contemporary organizations. Covers the human resource management implications of organizational responses to globalization. Examines the theoretical, methodological, empirical and comparative issues pertaining to competitiveness and the management of human resources, the impact of organisational strategies and international production on the workplace, the organization of labour markets, human resource development, cultural change in organisations, trade union responses, and trans‐national corporations. Cites many case studies showing how globalization has brought a lot of opportunities together with much change both to the employee and the employer. Considers the threats to existing cultures, structures and systems.

Details

Management Research News, vol. 23 no. 2/3/4
Type: Research Article
ISSN: 0140-9174

Keywords

Access Restricted. View access options
Article
Publication date: 1 June 1999

George K. Chacko

Gives an in depth view of the strategies pursued by the world’s leading chief executive officers in an attempt to provide guidance to new chief executives of today. Considers the…

10002

Abstract

Gives an in depth view of the strategies pursued by the world’s leading chief executive officers in an attempt to provide guidance to new chief executives of today. Considers the marketing strategies employed, together with the organizational structures used and looks at the universal concepts that can be applied to any product. Uses anecdotal evidence to formulate a number of theories which can be used to compare your company with the best in the world. Presents initial survival strategies and then looks at ways companies can broaden their boundaries through manipulation and choice. Covers a huge variety of case studies and examples together with a substantial question and answer section.

Details

Asia Pacific Journal of Marketing and Logistics, vol. 11 no. 2/3
Type: Research Article
ISSN: 1355-5855

Keywords

Access Restricted. View access options
Article
Publication date: 1 September 2016

Ren Hong, Du Yongjie, Cai Weiguang, Ma Xianrui, Wang Peng, Qin Beibei and Chen Mingman

With high-speed urbanization and strict requirements on energy conservation and environmental protection, eco-city has become the priority of urban development in China…

32

Abstract

With high-speed urbanization and strict requirements on energy conservation and environmental protection, eco-city has become the priority of urban development in China. Governments of all levels promote various eco-city planning schemes within a short term, but most schemes are characterized by randomness and subjectivity. To solve the lack of scientific pre-implementation evaluation for eco-city planning and improve eco-city construction quality, a systematic analysis is conducted in this study from three dimensions, namely, eco-city planning scheme, operating mechanism, and guarantee measures. A 3D evaluation model for eco-city planning is constructed through index selection. Schemes are ranked comprehensively with the distance measure method, and projection analysis is performed with the four-grid evaluation screen. Finally, the 3D evaluation model is applied to evaluate eco-city planning for Shenzhen, Chongqing, and Weifang. Results show that the model can be used to evaluate eco-city planning schemes effectively and comprehensively and offers targeted optimization suggestions in accordance with the evaluation results. Construction of the 3D evaluation model of eco-city planning based on the distance measure to determine the reasonability of eco-city planning reduces the institutional and social costs of eco-city planning practices.

Details

Open House International, vol. 41 no. 3
Type: Research Article
ISSN: 0168-2601

Keywords

1 – 10 of 642
Per page
102050