Search results

1 – 2 of 2
Per page
102050
Citations:
Loading...
Access Restricted. View access options
Article
Publication date: 15 August 2016

Brian Torries, Amanda J. Sterling, Nima Shamsaei, Scott M. Thompson and Steve R. Daniewicz

The purpose of this study is to calibrate a microstructure-based fatigue model for its use in predicting fatigue life of additively manufactured (AM) Ti-6Al-4V. Fatigue models…

947

Abstract

Purpose

The purpose of this study is to calibrate a microstructure-based fatigue model for its use in predicting fatigue life of additively manufactured (AM) Ti-6Al-4V. Fatigue models that are capable of better predicting the fatigue behavior of AM metals is required to further the adoption of such metals by various industries. The trustworthiness of AM metallic material is not well characterized, and fatigue models that consider unique microstructure and porosity inherent to AM parts are needed.

Design/methodology/approach

Various Ti-6Al-4V samples were additively manufactured using Laser Engineered Net Shaping (LENS), a direct laser deposition method. The porosity within the LENS samples, as well as their subsequent heat treatment, was varied to determine the effects of microstructure and defects on fatigue life. The as-built and heat-treated LENS samples, together with wrought Ti-6Al-4V samples, underwent fatigue testing and microstructure and fractographic inspection. The collected microstructure/defect statistics were used for calibrating a microstructure-sensitive fatigue model.

Findings

Fatigue lives of the LENS Ti-6Al-4V samples were found to be consistently less than those of the wrought Ti-6Al-4V samples, and this is attributed to the presence of pores/defects within the LENS material. Results further indicate that LENS Ti-6Al-4V fatigue lives, as predicted by the used microstructure-sensitive fatigue model, are in close agreement with experimental results. The used model could predict upper and lower prediction bounds based on defect statistics. All the fatigue data were found to be within the bounds predicted by the microstructure-sensitive fatigue model.

Research limitations/implications

To further test the utility of microstructure-sensitive fatigue models for predicting fatigue life of AM samples, future studies on additional material types, additive manufacturing processes and heat treatments should be conducted.

Originality/value

This study shows the utility of a microstructure-sensitive fatigue model for use in predicting the fatigue life of LENS Ti-6Al-4V with various levels of porosity and while in a heat-treated condition.

Access Restricted. View access options
Article
Publication date: 20 March 2017

Mohamad Mahmoudi, Alaa Elwany, Aref Yadollahi, Scott M. Thompson, Linkan Bian and Nima Shamsaei

The purpose of this paper is to understand the effect of four different factors: building orientation, heat treatment (solution annealing and aging), thermal history and process…

2947

Abstract

Purpose

The purpose of this paper is to understand the effect of four different factors: building orientation, heat treatment (solution annealing and aging), thermal history and process parameters on the mechanical properties and microstructural features of 17-4 precipitation hardening (PH) stainless steel (SS) parts produced using selective laser melting (SLM).

Design/methodology/approach

Various sets of test samples were built on a ProX 100™ SLM system under argon environment. Characterization studies were conducted using mechanical tensile and compression test, microhardness test, optical microscopy, X-ray diffraction and scanning electron microscopy.

Findings

Results indicate that building orientation has a direct effect on the mechanical properties of SLM parts, as vertically built samples exhibit lower yield and tensile strengths and elongation to failure. Post-SLM heat treatment proved to have positive effects on part strength and hardness, but it resulted in reduced ductility. Longer inter-layer time intervals between the melting of successive layers allow for higher austenite content because of lower cooling rates, thus decreasing material hardness. On the other hand, tensile properties such as elongation to failure, yield strength and tensile strength were not significantly affected by the change in inter-layer time intervals. Similar to other AM processes, SLM process parameters were shown to be instrumental in achieving desirable part properties. It is shown that without careful setting of process parameters, parts with defects (porosity and unmelted powder particles) can be produced.

Originality/value

Although the manufacturing of 17-4 PH SS using SLM has been investigated in the literature, the paper provides the first comprehensive study on the effect of different factors on mechanical properties and microstructure of SLM 17-4 PH. Optimizing process parameters and using heat treatment are shown to improve the properties of the part.

Details

Rapid Prototyping Journal, vol. 23 no. 2
Type: Research Article
ISSN: 1355-2546

Keywords

1 – 2 of 2
Per page
102050