Search results

The purpose of this paper is to develop a new vibration probe sensor for measurement of particle mass flow rate in gas–solid two phase flow.

A new vibration probe sensor based on polyvinylidene fluoride (PVDF) piezoelectric film is designed. The particle impact model according to Hertz contacting theory is presented. The average amplitude, standard deviation and spectral peak at the natural frequency of the probe (21.2 kHz) of the signals acquired through experiments are chosen as characteristic quantities for further analysis.

Through experimental study of relation between three characteristic quantities and the mass flow rate and air flow velocity, a good regularity is found in the average amplitude and the spectral peaks at natural frequency of the probe. According to the particle impact model, the structure of quantitative model is built and parameters of two models are calculated from experimental data. Additionally, tests are made to estimate mass flow rate. The average errors are 5.85 and 4.26 per cent, while the maximum errors are 10.81 and 8.65 per cent. The spectral peak at natural frequency of the probe is more applicable for mass flow rate measurement.

The sensor designed and the quantitative models established may be used in dilute phase pneumatic conveying lines of coal-fired power plants, cement manufacturing facilities and so on.

First, the new sensor is designed and the quantitative models are established. Second, the spectral peak at natural frequency of the probe is found that can be used for measurement of mass flow rate.

The effect of board intellectual capital on non-profit organizational performance in non-western, less developed economies has been an important yet under-researched area. Given that the institutional and business relationships of a board account for the majority of board intellectual capital, the purpose of this paper is to fill the previously mentioned research gap by addressing how the interactions of the two relationships of board directors influence Chinese philanthropic foundation performance.

Following Creswell's (2014) explanatory sequential mixed-methodology, a qualitative study (Study 1) was first conducted to pre-test the assumptions, and then a quantitative study (Study 2) was carried out based on a secondary database of 1,405 Chinese philanthropic foundations to further examine the hypotheses. Several regression models were built for analyzing the results.

Study 1 confirmed that Chinese philanthropic foundations gained greater revenues and hosted more public welfare activities by leveraging the reinforcing or complementary effects of board directors' intellectual capital to improve organizational performance. Study 2 further examined the hypotheses that the interactions of intellectual capital increased the total revenue and public welfare expenditure of the foundations; however, significant positive relationships were only identified in foundations at the local level, and no significant associations were found in those at the national level.

The research indicates that the intellectual capital of board directors may influence the performance of their philanthropic foundations. Thus, Chinese philanthropic foundations should be more aware of the importance of this influence when determining which candidates will join the board.

The study makes significant contributions to the existing knowledge of the development of non-governmental organizations; it incorporates the resource dependence theory and agency theory into understanding how the intricate interactions between the institutional and business relationships of board directors affect foundation performance and how the jurisdiction affiliations act as a boundary condition for such relationships in a non-western setting such as China.

The purpose of this paper is to investigate the government roles in cloud computing assimilation along two dimensions: government regulation and government support.

A research model was developed to depict the dual roles of government regulation and government support in cloud computing assimilation as well as the mediating effect of top management support (TMS). Using survey data collected from 376 Chinese firms that have already adopted cloud services, the authors tested the research model.

The impacts of both government regulation and government support on cloud computing assimilation are partially mediated by TMS. Government support exerts stronger impacts on TMS than government regulation.

This study extends the current information systems literature by highlighting the specific mechanisms through which governments influence firms’ assimilation of cloud computing.

Governments in developing countries could actively allocate funds or enact policies to effectively encourage cloud computing assimilation.

This study would complement previous findings about government regulation, and develop a more holistic understanding about the dual roles of governments in information technology innovation assimilation.

This study aims to expand the reliability and special functions of lightweight materials for high-end equipment and green manufacturing, so that it is the first such research to carry out nano-composite technology of nickel-coated carbon nanotubes (Ni-CNTs)-based titanium-zirconium chemical conversion on aluminum alloy substrate.

Corrosion behavior of various coatings was investigated using dropping corrosion test, linear polarization and electrochemical impedance spectroscopy. The results showed that the corrosion resistance of the nano-composite conversion coatings was significantly improved to compare with the conventional titanium-zirconium conversion coating. The morphology and microdomain characteristics of the nano-composite conversion coatings were characterized by SEM/eds/EPMA, which indicated that the CNT or Ni-CNTs addition promoting the integrity coverage of coatings in a short time.

Surface morphology of titanium-zirconium (Ti-Zr)/Ni-CNT specimens exhibited smooth, compact and little pores. The nano-composite conversion coatings are mainly composed of Al, O, C and Ti elements and contain a small amount of F and Zr elements, which illuminated that CNT or Ni-CNT addition could co-deposit with aluminum and titanium metal oxides.

The study of corrosion resistance of nano-composite conversion coatings and the micro-zone film-formation characteristics would be provided theoretical support for the development of basic research on surface treatment of aluminum alloys.

Banks, financial statement users, and accounting standard setters have long disagreed on the informativeness of banks’ statements of cash flows (SCFs) and there is a lack of relevant evidence in the literature. This paper examines the informativeness of the SCFs of U.S. commercial banks in two settings where SCFs are purported to be useful. The first analysis tests the incremental value relevance of banks’ SCFs beyond income statements and balance sheets and compares bank's SCFs with those of industrial firms. We find that banks’ SCFs have limited incremental value relevance, and are much less value relevant than industrial firms’ SCFs. The second analysis examines and finds no distress-predictive power of banks’ SCFs, especially in the presence of standard distress predictors. Overall, our results are consistent with the view that banks’ SCFs have limited informativeness.

Wearable electronic devices have emerged which require compact, flexible power storage devices such as batteries and supercapacitors. Recently, energy storage devices have been developed based on supercapacitor threads. However, current supercapacitor energy storage threads which use electrolytes based on aqueous gels have a 1 V potential window. This is much lower than the voltage required by most electronic devices. This current contribution presents an approach for fabricating a multilayer supercapacitor working as a circuit unit, in which series combinations of the multiple layer structures can achieve a higher potential window, which can better meet the needs of wearable electronic devices.

Two-capacitive layer thread supercapacitors were fabricated using a semi-automatic dip coating method by coating two capacitive layers sequentially on a 50 μm stainless steel core wire, each capacitive layer includes ink, aqueous-based gel electrolyte and silver conductive paint layers.

Two capacitive layers of the single thread supercapacitor can work independently, or as combination circuits – parallel and series. Cyclic voltammograms showed that all flexible circuits have high electrochemical stability. For the case of series circuit configuration, with H₃PO-polyvinyl alcohol (PVA) gel electrolyte, a working potential window of 2 V was achieved.

A flexible single thread supercapacitor of multilayer structure, with working voltage above 1 V in H₃PO₄-PVA gel electrolyte, has not been reported before. A semi-automatic dip coating setup used to process the thread supercapacitor has high potential for transfer to an industrial environment for mass production.

This paper aims to investigate the effect of Ti₃SiC₂ on the high-temperature tribological behaviors of NiCr coating, which was beneficial to improve the friction-wear performance of hot work mold.

NiCr-Ti₃SiC₂ coatings were prepared on H13 steel substrate by laser cladding. The microstructure, phases and hardness of obtained coatings were analyzed using a super-depth of field microscope, X-ray diffraction and microhardness tester, respectively, and the tribological performance of obtained coatings at 500°C was investigated using a high-temperature tester.

The results show the NiCr-Ti₃SiC₂ coatings are comprised of γ-Ni solid, solution, Ti_xNi_y, TiC and Ti₃SiC₂ phases, and the coating hardness is increased with the increase of Ti₃SiC₂ mass fraction, which is contributed to the fine-grain and dispersion strengthening effect by the addition of Ti₃SiC₂. The NiCr-Ti₃SiC₂ coatings present excellent friction reduction and wear resistance by the synergetic action of Ti₃SiC₂ lubricant and hard phase, and the wear mechanism is predominated by abrasive wear and oxidation wear.

Ti₃SiC₂ phase was used to reinforce the tribological performance of H13 steel at high temperature, and the roles of friction reduction and wear resistance were discussed.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-01-2023-0004/

This study aims to investigate the effect of powder recycling on the microstructure of plasma-sprayed Ni625-WC composite coating and to verify the feasibility of Ni625-WC powder recycling by comparing the corrosion resistance of the coatings in high-temperature and pressure CO₂ environment.

Recycling powder is an efficient way to improve the utilization rate of metal powder during plasma spraying. The plasma-sprayed Ni625-WC composite coatings with original powder (OC) and recovered powder (RC) were analytically compared by using scanning electron microscope (SEM) equipped with an energy-dispersive spectroscopy, X-ray diffractometer, and X-ray photoelectron spectroscopy. The corrosion resistance of the Ni625-WC composite coatings was characterized in a self-designed high-temperature and pressure autoclave by an electrochemical workstation.

The results showed that there is massive M₂₃C₆ in OC and acicular M₂₃C₆ in RC. The WC particles in RC are more uniformly distributed, and the area ratios of WC particles to Inconel 625 matrix are 2.37% higher than OC. RC showed high corrosion resistance, and the recycling of Ni625-WC powder is feasible.

The feasibility of Ni625-WC powder recycling was verified from the microstructure evolution and electrochemical behavior of the coatings.

This study aims to investigate the effect of coatings prepared by the addition of copper-aluminum alloy powder on the corrosion behavior of 90/10 copper-nickel alloy.

Coatings of copper-aluminum alloy powder at different contents (Wt.% = 50%, 60%, 70% and 80%) were prepared by the high-temperature heat treatment process. The microstructure and component of the coatings were characterized by scanning electron microscope, X-ray diffraction, energy dispersive spectrometer and X-ray photoelectron spectroscopy. The electrochemical properties of the coating were explored by electrochemical impedance spectroscopy.

The results show that the aluminized layer was successfully constructed on the surface of 90/10 copper-nickel alloy, the composition of the coating was composed of copper-aluminum phase and aluminum-nickel phase, the existence of the aluminum-nickel phase was formed by the diffusion of Ni elements within the substrate and because of the diffusion, the Al-Ni phase was distributed in the middle and bottom of the coating more. The Al-Ni phase is considered to be the enhanced phase for corrosion resistance. When the copper-aluminum alloy powder content is 70 Wt.%, the corrosion resistance is the best.

The enhancement of corrosion resistance of 90/10 copper-nickel alloy by the copper-aluminum alloy powder was revealed, the composition of the aluminized layer and the mechanism of corrosion resistance were discussed.

The purpose of this paper is to study the evolution of Chinese industrial relations after the market reform of 1978, while basing its arguments and conclusion on analysis of the interactions of key actors in the labour arena in China. The significant phenomena in the evolution of industrial relations are the coming of transnational capital and the emergence of self‐organising protests by migrant workers.

The paper uses a case study approach.

The Labour Contract Law and the local political economy experience strong effects from TNCs and other business players. Meanwhile, globalisation has introduced the civil society movement to China, which has given rise to an increasing number of NGOs working for labour rights. Tight financial and technical connections between grassroots NGOs and international donor organisations make it possible for bottom‐up labour activities to counteract the unilateral influence of the state and market over the Chinese workforce. Since the ACFTU, the official trade union umbrella, has many institutional constraints to undertake a thorough transition towards labour in the near future, workers' representation is diversified.

One implication for further theoretical studies is that tripartism cannot fully disclose the reality of Chinese labour, and that labour representation derives from both unions and self‐organisation of workers, such as NGOs, which opens more room for the entrenchment of the grassroots labour movement to sustain the balance of power among the state, ACFTU, firms, international market forces and individual workers in the long term.