Search results

This study aims to examine the effect of supply chain agility (SCA) on the export performance of the Pakistani textile industry. Despite being one of the leading manufacturing and exporting sectors, only a handful of the extant literature is found on the textile industry.

A structured questionnaire was prepared using the extant literature. Data was gathered from 146 respondents associated with the textile industry of Pakistan. Hypotheses were tested using structural equation modeling after ensuring the reliability and validity of the data collected for this study.

This study provides several crucial insights for export-oriented firms. International entrepreneurial orientation and domestic competition are the crucial drivers for a firm’s agility. This study confirms that SCA has a significant impact on escalating export performance of the Pakistani textile industry in the international market.

To the best of the authors’ knowledge, the theoretical framework developed for this study is original and drawn from the extant literature. The findings of resulted from empirical testing of the theoretical model in the context of developing countries provide new information in the knowledge body.

The purpose of this paper is to present investigation of the flow, heat and mass transfer of a nanofluid over a suddenly moved flat plate using Buongiorno’s model. This study is different from some of the previous studies as the effects of Brownian motion and thermophoresis on nanoparticle fraction are passively controlled on the boundary rather than actively.

The partial differential equations governing the flow are reduced to a system of non-linear ordinary differential equations. Viable similarity transforms are used for this purpose. A well-known numerical scheme called Runge-Kutta-Fehlberg method coupled with shooting procedure has been used to find the solution of resulting system of equations. Discussions on the effects of different emerging parameters are provided using graphical aid. A table is also given that provides the results of different parameters on local Nusselt and Sherwood numbers.

A revised model for Stokes’ first problem in nanofluids is presented in this paper. This model considers a zero flux condition at the boundary. Governing equations after implementing the similarity transforms get converted into a system of non-linear ordinary differential equations. Numerical solution using RK-Fehlberg method is also carried out. Emerging parameters are analyzed graphically. Figures indicate a quite significant change in concentration profile due to zero flux condition at the wall.

This work can be extended for other problems involving nanofluids for the better understanding of different properties of nanofluids.

The purpose of this study is to analyze thermo-diffusion and diffusion-thermo effects, combined with first-order chemical reaction, in the flow of a micropolar fluid through an asymmetric channel with porous boundaries. Suction/injection velocities of upper and lower walls are taken to be different from each other. The channel exhibits a parting or embracing motion and the fluid enters, or leaves, the channel because of suction/injection through the permeable walls.

The solution of the problem is obtained by using the fourth-order Runge-Kutta method combined with the shooting technique.

The asymmetric nature of the channel that is caused by the different permeabilities of the walls deeply influences the flow. The temperature of the fluid rises significantly by increasing the absolute value of A for both Case I and Case II. While, for the concentration profile, the concentration drops near the lower vicinity of the center in Case I, and, it falls near the lower wall of the channel in Case II. Stronger Dufour effects increase the temperature of the fluid except for Case 1 at the center of the channel and for Case II in lower quarter of the channel.

It is confirmed that the presented work is original and is not under consideration by any other journal.

In this current study, the authors aim to analyze non-linear radiative squeezed flow in a rotating frame of viscous fluid.

The Radioactive nature of the fluid is taken into consideration. The reduced form of equations governing the flow are developed by the implementation of similarity transformations. The coupled system thus obtained is solved by using the homotopy analysis method (HAM).

Augmentation in velocity and temperature profiles is discussed graphically by varying various involved parameters. The total error of the system is discussed in Table I. The cases of linear radiation and non-linear radiation are also discussed in Tables II and III.

The study presented in this paper is original and it has not been submitted to any other journal for publication purpose. The contents are original and proper references have been provided wherever applicable.

The aim of this manuscript is to study the flow of a nanofluid through a porous channel under the influence of a transverse magnetic field. Permeability of the walls is considered to be different, which results in an asymmetric nature of the flow. The height of the channel is variable, and it dilates or squeezes at a uniform rate.

A numerical solution (Runge–Kutta–Fehlberg) has been obtained after reducing the governing equations to a system of nonlinear ordinary differential equations using some suitable similarity transforms, both in time and space.

An increase in absolute values of the permeability parameter results in an enhanced mass transfer rate at both the walls, while the rate of heat transfer also increases at the lower wall. Few graphs are also dedicated to see the behavior of Nusselt and Sherwood numbers following the variations in flow parameters.

A pictorial description of the flow and effects of emerging parameters on the temperature and nanoparticle concentration profiles is presented to analyze the flow behavior. It is established that the asymmetry of the channel affects the flow quite significantly.

The purpose of this study is to investigate numerically the influence of nonlinear thermal radiation on the flow of a viscous fluid. The flow is confined in a channel with deformable porous walls.

Two numerical schemes, namely, Galerkin’s method (GM) and Runge–Kutta–Fehlberg (RKF) method have been used to obtain solutions after reducing the governing equations to a system of nonlinear ordinary differential equations.

Heat transfer rate falls at the upper wall owing to the decreasing values of the permeability parameter. However, at the lower wall, the same rate rises. Increment in θ_w increases the rate of heat transfer at both walls. Nusselt number also increases with the increasing values of Rd. Rd also uplifts the temperature distribution, except for the case where it falls near the lower wall owing to the contraction coupled with injection.

It is confirmed that the presented work is original.

This paper aims to explore the flow of nanofluid over bi-directional stretching sheet in the presence of magnetic field and linear thermal radiation.

In this study, water is taken as a base fluid, and copper is diluted in the base fluid. Further, four different shapes of nanoparticles are considered for the analysis. The governing nonlinear partial differential equations are transformed into the system of ordinary differential equations after using the feasible similarity transformations. Solution of the model is then performed by means of Runge–Kutta scheme.

Influence of the emerging dimensionless parameters on velocity, temperature, skin friction coefficient and local rate of heat transfer are studied with the help of graphs.

The study is presented in this paper is original and has not been submitted to any other journal for the publication purpose. The contents are original, and proper references have been provided wherever applicable.

The purpose of this paper is to explore the moderating role of competitive intensity between the existing relationship of capital structure and firm performance.

Using the balanced panel data of listed non-financial firms of Pakistan, the present study adopts both the panel and OLS estimation techniques to draw the inferences.

The results exhibit that high debt ratio is harmful for the accounting performance of the selected sample firms of Pakistan. In addition, product market competition negatively moderates the relationship between capital structure and firm performance which suggests that high product market competition can be used as a substitute of debt financing to align the interests of a firm’s managers and shareholders.

The findings of the research provide evidence for the policy makers/regulators that the sample firms should discourage the high debt financing in the presence of competitive intensity in the product marketplace.

The core contribution of the current research is to examine the moderating role of product market competition on the leverage–performance relationship because, to the best of the authors’ knowledge, no single study has previously explored this relationship in the context of Pakistan.

The purpose of this paper is to assess the flow of a nanofluid over a porous moving wedge. The passive control model along with the magnetohydrodynamic (MHD) effects is used to formulate the problem. Furthermore, in energy equation, the non-linear thermal radiation has also been incorporated. The equations governing the flow are transformed into a set of ordinary differential equations by using suitable similarity transforms. The reduced system of equations is then solved numerically using a well-known Runge–Kutta–Fehlberg method coupled with a shooting technique. The influence of parameters involved on velocity, temperature and concentration profiles is highlighted with the help of a graphical aid. Expressions for skin-friction coefficient, local Nusselt number and Sherwood number are obtained and presented graphically.

Numerical solution of the problem is obtained using the well-known Runge–Kutta–Fehlberg method.

The analysis provided gives a clear description that the increase in m and magnetic parameter M results in an increased velocity profile. Both these parameters normalize the velocity field. Radiation parameter, Rd, increases the temperature and concentration of the system so does the temperature ratio θ_ω reduces the heat transfer rate at the wall for both stretching and shrinking wedge.

In the study presented, the flow of nanofluid over a moving permeable wedge is considered. The solution of the equations governing the flow is presented numerically. For the validity of results obtained, a comparison is also presented with already existing results. To the best of the authors’ knowledge, this investigation is the first of its kind on the said topic.

The purpose of this paper is to explore the impact of thermal radiation, viscous dissipation and Joule heating effects on the flow of a magneto-nanofluid between two horizontally placed plates. Three distinct shapes of nanoparticles in a base fluid (water) are considered to compose the nanofluid.

Introducing feasible similarity variables, the flow model is transformed into a nonlinear and coupled system of ordinary differential equations. The consequent system is solved by using homotopy analysis method.

Furthermore, the influence of embedded parameters on velocity and temperature profiles is highlighted graphically. The same is done for showing the variations in skin friction coefficient and local rate of heat transfer. Under certain conditions, present results compared with already existing results in the literature. Some main findings are pinpointed in the last section before the bibliography. From presented work, it is analyzed that the velocity field along y-axis and x-axis are increasing and decreasing functions of suction/injection parameter. The velocity of the fluid starts increases for Reynolds number and declines for volumetric fraction of the nanoparticles. Significant variations in angular velocity are observed for volumetric fraction and Reynolds number, respectively. Thermal field increases rapidly for brick-shaped nanoparticles, and for platelet-shaped nanoparticles, it decreases rapidly. Local rate of heat transfer increases for radiation and Reynolds number and starts decreasing for Eckert number.

The study presented is original and has not been submitted to any other journal for the publication purpose. The contents are original and proper references have been provided wherever applicable.