Search results

Currently, engineering project design lacks a design framework that fully combines subjective experience and objective data. This study develops an aided design decision-making framework to automatically output the optimal design alternative for engineering projects in a more efficient and objective mode, which synthesizes the design experience.

A database of design components is first constructed to facilitate the retrieval of data and the design alternative screening algorithm is proposed to automatically select all feasible design alternatives. Then back propagation (BP) neural network algorithm is introduced to predict the cost of all feasible design alternatives. Based on the gray relational degree-particle swarm optimization (GRD-PSO) algorithm, the optimal design alternative can be selected considering multiple objectives.

The case study shows that the BP neural network-cost prediction algorithm can well predict the cost of design alternatives, and the framework can be widely used at the design stage of most engineering projects. Design components with low sensitivity to design objectives have been obtained, allowing for the consideration of disregarding their impacts on design objectives in such situations requiring rapid decisions. Meanwhile, design components with high sensitivity to design objective weights have also been obtained, drawing special attention to the effects of changes in the importance of design objectives on the selection of these components. Simultaneously, the framework can be flexibly adjusted to different design objectives and identify key design components, providing decision reference for designers.

The framework proposed in this paper contributes to the knowledge of design decision-making by emphasizing the importance of combining objective data and subjective experience, whose significance is ignored in the existing literature.

In this study, the authors examined demand-side credit in rural China with the aims of understanding attribute preferences and the willingness of farmers to pay for credit.

The authors implemented an in-the-field discrete choice experiment (DCE) using a D-optimal block (6 × 9 × 3) design applied to 420 farm households across five Chinese provinces (Shandong, Sichuan, Shaanxi, Jiangsu and Henan) in the summer and fall of 2018. The DCE included six attributes including the interest rate, term of loan, type of loan, type of repayment, type of institution and mobile banking services.

Conditional and mixed logit results indicated a downward sloping credit demand curve with variable elasticity across regions. Provincial willingness-to-pay (WTP) indicators suggested that farmers were willing to pay a premium for long-term ( 0.03–0.687%) and low collateral credit loans ( 0.79–2.93%). Also, four of five provinces indicated a preference for loan amortization rather than lump-sum payment. Interestingly, in comparison to the Agricultural Bank of China (ABC), only farmers in Shandong, Sichuan and Shaanxi indicated a preference for rural credit cooperatives (RCCs)/banks and the Postal Savings Bank of China (PSBC). Another quite surprising result was bank services, in our case, access to mobile banking did not appear to induce WTP for agricultural credit. While conditional and mixed logit regression coefficients were similar (and therefore robust), the authors found that there was substantial heterogeneity across attribute preferences on term of loan, type of loan and amortization. Preferences for type of lender and mobile banking were generally homogenous. This result alone suggested that lenders should consider offering a suite of credit products with different attributes in order to maximize the potential pool of borrowers. While there were some differences across provinces, farmers appeared to be indifferent to lenders, and it did not appear that offering banking services such as mobile banking had any bearing on credit decisions.

This paper presents a first step in using in-the-field choice experiments to better understand rural finance in China. Although the sample size satisfies conventional levels of significance and rank conditions, the authors caution against attributing results to China as a whole. Different provinces have different institutional structures and agricultural growing conditions and economies and these effects may differentially affect WTP for credit. Although by all indications farmers were aware of credit, not all farmers, in fact a minority, actually borrowed from a financial institution. This is not unusual in China, but for these farmers, the DCE was posed as hypothetical. Likewise, the study’s design was based on a generic credit product typical of rural China, and the authors caution against making inferences about other products with different attributes and risk structures.

This study is motivated by the rapidly changing dynamic in China's agricultural economy. With specific reference to new laws and regulations about the transfer of land use rights (LURs), China's agricultural economy is undergoing significant and rapid change which will require better understanding by policy makers, lenders and practitioners of the changing credit needs of farmers, including the new and emerging class of commercial farmers.

To the best of the authors’ knowledge, the authors believe that the result provided in this paper present the first use of in-the-field DCE and are the first to be reported in either the English or Chinese literature on rural credit product design.

Looks at consumer research in Greater China including Mainland China, Hong Kong and Taiwan. Maps out the contributions within this area and guides future research. Examines the state of the art over the 1979‐97 period, with particular emphasis on the topics that have been researched, the extent of the theory development in the field and the methodologies used in conducting research. Uses content analysis to review 75 relevant articles. Suggests that, while a considerable breadth of topics have been researched, there remains much to be done, there is further room for theoretical development in Chinese consumer behaviour studies; and the methodologies used need improvement and further refinement.

In 1987, Campbell Soup Company introduced the Souper Combo, a line of frozen soup and sandwiches. Melvin Druin, vice‐president for packaging, called it “the perfect combination of old‐fashioned good taste and today's convenience. No mess. No fuss. Easy to use. All you have to do is clean your spoon. Everything else just throw away.” Unfortunately, the multi‐layered plastic‐coated packaging does not just disappear when thrown away. Plastics packaging, particularly from convenience products, has become a waste disposal nightmare. Garbage, an environmental magazine, gave the Souper Combo an “in the dumpster” award, saying, “It's precisely the kind of product that's created the municipal landfill monster.”

The novelty addressed here is undertaken by using tailor-made and fully characterized starch nanoparticles (SNPs) having a particle size ranging from 80 to 100 nm with a larger surface area, biodegradability and high reactivity as a starting substrate for cadmium ions and basic dye removal from wastewater effluent. This was done via carboxylation of SNPs with citric acid via esterification reaction using the dry preparation technique, in which a simple, energy-safe and sustainable process concerning a small amount of water, energy and toxic chemicals was used. The obtained adsorbent is designated as cross-linked esterified starch nanoparticles (CESNPs).

The batch technique was used to determine the CESNPs adsorption capacity, whereas atomic adsorption spectrometry was used to determine the residual cadmium ions concentration in the filtrate before and after adsorption. Different factors affecting adsorption were examined concerning pH, contact time, adsorbent dose and degree of carboxylation. Besides, to validate the esterification reaction and existence of carboxylic groups in the adsorbent, CESNPs were characterized metrologically via analytical tools for carboxyl content estimation and instrumental tools using Fourier-transform infrared spectroscopy (FTIR) spectra and scanning electron microscopy (SEM) morphological analysis.

The overall adsorption potential of CESNPs was found to be 136 mg/g when a 0.1 g adsorbent dose having 190.8 meq/100 g sample carboxyl content at pH 5 for 60 min contact time was used. Besides, increasing the degree of carboxylation of the CESNPs expressed as carboxyl content would lead to the higher adsorption capacity of cadmium ions. FTIR spectroscopy analysis elucidates the esterification reaction with the appearance of a new intense peak C=O ester at 1,700 cm⁻¹, whereas SEM observations reveal some atomic/molecules disorder after esterification.

The innovation addressed here is undertaken by studying the consequence of altering the extent of carboxylation reaction expressed as carboxyl contents on the prepared CESNPs via a simple dry technique with a small amount of water, energy and toxic chemicals that were used as a sustainable bio nano polymer for cadmium ions and basic dye removal from wastewater effluent in comparison with other counterparts published in the literature.

This paper aims to investigate the effect of lubricant viscosity model with improver on friction and lubrication of piston skirt-cylinder liner conjunction.

A dynamic calculation model is established for the piston skirt-cylinder liner conjunction of a heavy-duty commercial diesel engine, to explore the effects of two kinds of lube oil viscosity models named after polyalkyle-metacrylate-1 (PAMA1) and styrene-isoprene-copolymer (SICP) improvers on the maximum oil film viscosity, the minimum oil film thickness, the peak oil film pressure, the maximum shear rate, the friction force and the total friction power loss.

The variation trends with the crank angle of the above parameters are not changed with the difference of improvers, while obvious numerical differences are found except the maximum oil film pressure. The minimum oil film thickness and maximum shear rate of PAMA1 are larger than that of SICP, the maximum oil film viscosity of SICP is larger than that of PAMA1, which indicates that the shear-thinning effect of PAMA1 is greater, the maximum friction force on the piston of SICP is larger than that of PAMA1, and the total friction power consumption is also larger, the average friction power consumptions of SICP and PAMA1 are 385.4 and 262.8 W, respectively, with the relative difference of 31.8 per cent.

The influence of different lubricating oil additive models on the lubrication and friction of piston skirt-cylinder liner conjunction is simulated and analyzed.

A research framework that explains adoption intention in students with regard to brain–computer interface (BCI) games in the learning context was proposed and empirically examined.

In this study, an approach integrating the decomposed theory of planned behavior, perceived playfulness, risk and the task–technology fit (TTF) concept was used to assess data collected using a post-experiment questionnaire from a student sample in Taiwan. The research model was tested using the partial least-squares structural equation modeling (PLS-SEM) technique.

Attitude, subjective norms and TTF were shown to impact intention to play the BCI game significantly, while perceived behavioral control did not show a significant impact. The influence of superiors and peers was found to positively predict subjective norms. With the exception of perceived ease of use, all of the proposed antecedents were found to impact attitude toward BCI games. Technology facilitating conditions and BCI technology characteristics were shown to positively determine perceived behavior control and TTF, respectively. However, the other proposed factors did not significantly influence the latter two dependents.

This research contributes to the nascent literature on BCI games in the context of learning by highlighting the influence of belief-related psychological factors on user acceptance of BCI games. Moreover, this study highlights the important, respective influences of perceived playfulness, risk and TTF on users' perceptions of a game, body monitoring and technology implementation, each of which is known to influence willingness to play.

The purpose of this study is to improve the global optimization ability of the Tabu search (TS) algorithm, and then improve the calculation efficiency and accuracy of rolling schedule in tandem cold rolling.

A case-based reasoning–Tabu search hybrid algorithm (CBRTS) has been presented. First, the case-based reasoning technology was adopted to obtain high-quality initial solution and then the TS algorithm was used for global optimization.

The optimization effect of CBRTS is compared with that of the traditional TS algorithm, and the analysis result indicates that the CBRTS has a faster convergence rate than TS, and the optimization results are closer to the global optimal. Meanwhile, the rolling schedule calculated by CBRTS is more reasonable, which can increase the production efficiency while giving full play to the capacity of equipment.

A CBRTS hybrid algorithm is presented. The strong dependence of the TS algorithm on the initial solution has been solved. The rolling schedule multi-objective optimization functions are established. The proposed algorithm is applied in a 1,450-mm tandem cold rolling production line. The improved method can reduce about half the iterations compared with the traditional one.

This study aims to examine the web of relationships among training value, employee internal states (psychological empowerment, employee engagement and motivation to transfer) and training transfer.

Data is obtained from different categories of employees a few months after attending different training programs organized by their organization. Structural equation modeling is used to analyze the data. Bias-corrected and accelerated (BCa) confidence intervals are used to determine the significance of the hypothesized paths.

This study finds that training value relates to motivation to transfer, psychological empowerment and employee engagement. Motivation to transfer also relates to training transfer and employee engagement. Again, psychological empowerment relates to motivation to transfer, employee engagement and training transfer. Concerning the mediated relationship, psychological empowerment and motivation to transfer fully mediate the relationship between training value and training transfer.

Internal states must be the focus of human resource department (HRD) scholars in their quest to discover training transfer improvement mechanisms. HRD practitioners and organizations generally should also prioritize the enhancement of the internal states of employees to aid training transfer.

In this study, training transfer facilitating factors particularly employee internal states are explored by examining the web of relationships comprising training value, motivation to transfer, psychological empowerment, employee engagement and training transfer in a pentagonal model using a homogeneous sample with a common understanding of training transfer due to the similarities in their training as well as job conditions.

The purpose of this paper is to unify the expression of fractional grey accumulating generation operator and the reducing generation operator, and build the FDGM(1,1) model with the unified fractional grey generation operator.

By systematically studying the properties of the fractional accumulating operator and the reducing operator, and analyzing the sensitivity of the order value, a unified expression of the fractional operators is given. The FDGM(1,1) model with the unified fractional grey generation operator is established. The relationship between the order value and the modeling error distribution is studied.

The expression of the fractional accumulating generation operator and the reducing generation operator can be unified to a simple expression. For −1<r < 1, the fractional grey generation operator satisfies the principle of new information priority. The DGM(1,1) model is a special case of the FDGM(1,1) model with r = 1.

The sensitivity of the unified operator is verified through random numerical simulation method, and the theoretical proof was not yet possible.

The FDGM(1,1) model has a higher modeling accuracy and modeling adaptability than the DGM(1,1) by optimizing the order.

The expression of the fractional accumulating generation operator and the reducing generation operator is firstly unified. The FDGM(1,1) model with the unified fractional grey generation operator is firstly established. The unification of the fractional accumulating operator and the reducing operator improved the theoretical basis of grey generation operator.