Search results

This study aims to analyze the unsteady flow of hybrid Cu-Al₂O₃/water nanofluid over a permeable stretching/shrinking disc. The analysis of flow stability is also purposed because of the non-uniqueness of solutions.

The reduced differential equations (similarity) are solved numerically using the aid of bvp4c solver (Matlab). Two types of thermophysical correlations for hybrid nanofluid (Type 1 and 2) are adopted for the comparison results. Using correlation Type 1, the heat transfer and flow analysis including the profiles (velocity and temperature) are presented in the figures and tables with different values control parameters. Three sets of hybrid nanofluid are analyzed: Set 1 (1% Al₂O₃ + 1% Cu), Set 2 (0.5% Al₂O₃ + 1% Cu) and Set 3 (1% Al₂O₃ + 0.5% Cu).

The comparison of numerical values between present (Types 1 and 2 correlations) and previous (Type 2 correlations) results are in a good compliance with approximate percent relative error. The appearance of two solutions is noticed when the suction parameter is considered and the unsteady parameter is less than 0 (decelerating flow) for both stretching and shrinking disc while only one solution is possible for steady flow. The hybrid nanofluid in Set 1 can delay the separation of boundary layer but the hybrid nanofluid in Set 3 has the greatest heat transfer rate. Moreover, the inclusion of wall mass suction for stretching case can generate a significant increment of heat transfer rate approximately 90% for all fluids (water, single and hybrid nanofluids).

The present findings are novel and can be a reference point to other researchers to further analyze the heat transfer performance and stability of the working fluids.

The purpose of this paper is to numerically analyze the stagnation point flow of Cu-Al2O3/water hybrid nanofluid with mixed convection past a flat plate and circular cylinder.

The similarity equations that reduced from the boundary layer and energy equations are solved using the bvp4c solver. The duality of solutions is observed within the specific range of the control parameters, namely, mixed convection parameter λ, curvature parameter γ and nanoparticles volumetric concentration ϕ1 for alumina, while for copper ϕ2. The stability analysis is also designed to justify the particular solutions’ stability. Additionally, the idea to obtain the solution for large value of λ and γ is also presented in this paper.

Two solutions exist in opposing and assisting flows up to a critical value λc where λc lies in the opposing region. An upsurge of the curvature parameter tends to extend the critical value (delay the separation process), whilst increase the heat transfer performance of the working fluid. Meanwhile, the application of hybrid Cu-Al2O3/water nanofluid also can decelerate the separation of laminar boundary layer flow and produce higher heat transfer rate than the Cu–water nanofluid and pure water.

The results are new and original. This study benefits to the other researchers, specifically in the observation of the fluid flow characteristics and heat transfer rate of the hybrid nanofluid. Also, this paper features with the mathematical formulation for the solution with large values of λ and γ.

The evaluation of high thermal efficiency has actively highlighted the unique behaviour of hybrid nanofluid. Thus, the purpose of this paper is to emphasize the hybrid nanofluid’s stagnation point in three-dimensional flow with magnetic field.

The defined ordinary differential equations systems are addressed using the bvp4c solver.

The results indicate that using dual solutions is possible as long as the physical parameters remain within their specified ranges. Hybrid nanofluid flow has been recognised for its superior heat transfer capabilities in comparison to both viscous flow and nanofluid flow. Furthermore, it has been demonstrated in the current study that augmenting the volume concentration of nanoparticles leads to a corresponding enhancement in the rate of heat transfer. When the velocity gradients ratio is augmented, there is a corresponding reduction in the thermal performance. The separation value grows as the magnetic parameter rises, which signifies the expansion of the boundary layer.

The originality of the paper highlights the general mathematical hybrid model of the three-dimensional problem with the magnetohydrodynamics (MHD) effect in the stagnation point flow. The comprehensive examination of the suggested model has not yet been thoroughly addressed in prior research.

The purpose of this paper is to numerically investigate the hybrid nanofluid flow with the imposition of magnetohydrodynamic (MHD) and radiation effects alongside the convective boundary conditions over a permeable stretching/shrinking surface.

The mathematical model is formulated in the form of partial differential equations (PDEs) and are then transformed into the form of ordinary differential equations (ODEs) by using the similarity variables. The deriving ODEs are solved numerically by using the bvp4c solver in MATLAB software. Stability analysis also has been performed to determine the stable solution among the dual solutions obtain. For method validation purposes, a comparison of numerical results has been made with the previous studies.

The flow and the heat transfer of the fluid at the boundary layer are described through the plot of the velocity profile, temperature profile, skin friction coefficient and local Nusselt number that are presented graphically. Dual solutions are obtained, but only the first solution is stable. For the realizable solution at the shrinking surface, the proliferation of nanoparticle volume fraction (copper) and magnetic (magnetohydrodynamics) parameters can impede the boundary layer separation. Also, Biot number could enhance the temperature profile and the heat transfer rate at the shrinking surface region. The incrementation of 0.1% of Biot number has enhanced the heat transfer rate by approximately 0.1% and the incrementation of 0.5% volume fraction for copper has reduced the heat transfer rate by approximately 0.17%.

The presented model and numerical results are original and new. It can be used as a future reference for further investigation and related practical application. The main contribution of this investigation includes giving the initial prediction and providing the numerical data for the other researchers for their future reference regarding the impacts of nanoparticles volumetric concentration towards the main physical quantities of interest in the presence of magnetic and radiation parameters with the convective boundary conditions.

This paper aims to analyse numerically the unsteady stagnation-point flow of Cu-Al₂O₃/H₂O hybrid nanofluid towards a radially shrinking Riga surface with thermal radiation.

The governing partial differential equations are transformed into a set of ordinary (similar) differential equations by applying appropriate transformations. The numerical computation of these equations including the stability analysis is conducted using the bvp4c solver.

Two solutions are possible within the allocated interval: shrinking parameter, unsteadiness decelerating parameter, electro-magneto-hydrodynamics (EMHD) parameter, nanoparticles volumetric concentration, radiation parameter and width parameter, whereas the stability analysis certifies that the first (upper branch) solution, which fulfills the boundary conditions is the physical/real solution. The EMHD parameter generated from the application of Riga plate enhances the skin friction coefficient as well as the heat transfer process. The width parameter d is also one of the factors in the deterioration of the skin friction coefficient and heat transfer rate. It is crucial to control the width parameter of the magnets and electrodes to obtain the desired outcome. The radiation parameter is not affecting the boundary layer separation because the critical values are unchanged. However, the addition of radiation and unsteadiness decelerating parameters boosts the thermal rate.

The results are novel and contribute to the discovery of the flow and thermal performance of the hybrid nanofluid subjected to a radially shrinking Riga plate. Besides, this work is beneficial to the other researchers and general audience from industries regarding the factors which contribute to the thermal enhancement of the working fluid.

This paper aims to accentuate the behavior of second-grade hybrid Al₂O₃–Cu nanofluid flow and its thermal characteristics driven by a stretching/shrinking Riga plate.

The second-grade fluid is considered with the combination of Cu and Al₂O₃ nanoparticles. Three base fluids namely water, ethylene glycol (EG) and methanol with different Prandtl number are also examined. The formulation of the mathematical model of second-grade hybrid nanofluid complies with the boundary layer approximations. The complexity of the governing model is reduced into a simpler differential equations using the similarity transformation. The bvp4c solver is fully used to solve the reduced equations. The observation of multiple solutions is conducted for the assisting (stretching) and opposing (shrinking) cases.

The impact of suction parameter, second-grade parameter, electromagnetohydrodynamics (EMHD) parameter, velocity ratio parameter and the volumetric concentration of the alumina and copper nanoparticles are numerically analyzed on the velocity and temperature profiles, skin friction coefficient and local Nusselt number (thermal rate) of the second-grade Al₂O₃–Cu/water. The solution is unique when (static and stretching cases) while dual for a specific range of negative in the presence of suction effect. Based on the appearance of the first solution in all cases of, it is physically showed that the first solution is stable. Further examination reveals that the EMHD and suction parameters are the contributing factors for the thermal enhancement of this non-Newtonian working fluid. Meanwhile, the viscosity of the non-Newtonian fluid also plays a significant role in the fluid motion and heat transfer rate based on the finding that the EG base fluid produces the maximum heat transfer rate but the lowest critical value and skin friction coefficient.

The results are novel and contribute to the discovery of the hybrid nanoparticles’ performance in the non-Newtonian second-grade fluid. Besides, this study is beneficial to the researchers in this field and general audience from industries regarding the factors, which contributing to the thermal enhancement of the working fluid.

The purpose of this paper is to study the effects of thermal radiation and homogeneous-heterogeneous reactions in the three-dimensional hybrid nanofluid flow past a permeable stretching/shrinking sheet.

The combination of aluminum oxide (Al₂O₃) and copper (Cu) nanoparticles with total volumetric concentration is numerically analyzed using the existing correlations of hybrid nanofluid. With the consideration that both homogeneous and heterogeneous reactions are isothermal while the diffusion coefficients of both autocatalyst and reactant are same, the governing model is simplified into a set of differential (similarity) equations.

Using the bvp4c solver, dual solutions are presented, and the stability analysis certifies the physical/real solution. The findings show that the suction parameter is requisite to induce the steady solution for shrinking parameter. Besides, the fluid concentration owing to the shrinking sheet is diminished with the addition of surface reaction.

The present findings are novel and can be a reference point to other researchers to further analyze the heat transfer performance and stability of the working fluids.

The purpose of this study is to implement a new class of similarity transformation in analyzing the three-dimensional boundary layer flow of hybrid nanofluid. The Cu-Al₂O₃/water hybrid nanofluid is formulated using the single-phase nanofluid model with modified thermophysical properties.

The governing partial differential equations are reduced to the ordinary (similarity) differential equations using the proposed similarity transformation. The resulting equations are programmed in Matlab software through the bvp4c solver to obtain their solutions. The features of the reduced skin frictions and the velocity profiles for different values of the physical parameters are analyzed and discussed.

The non-uniqueness of the solutions is observed for certain physical parameters. The dual solutions are perceived for both permeable and impermeable cases and being the main agenda of the work. The execution of stability analysis proves that the first solution is undoubtedly stable than the second solution. An increase in the mass transpiration parameter leads to the uniqueness of the solution. Oppositely, as the injection parameter increase, the two solutions remain. However, no separation point is detected in this problem within the considered parameter values. The present results are decisive to the pair of alumina and copper only.

The present findings are original and can benefit other researchers particularly in the field of fluid dynamics. This study can provide a different insight of the transformation that is applicable to reduce the complexity of the boundary layer equations.

This paper aims to scrutinize the analysis of non-axisymmetric Homann stagnation point flow and heat transfer of hybrid Cu-Al₂O₃/water nanofluid over a stretching/shrinking flat plate.

The similarity transformation which fulfils the continuity equation is opted to transform the coupled momentum and energy equations into the nonlinear ordinary differential equations. Numerical solutions which are elucidated in the tables and graphs are obtained using the bvp4c solver.

Non-unique solutions (first and second) are feasible for both stretching and shrinking cases within the specific values of the parameters. First solution is the physical/real solution based on the execution of stability analysis. An upsurge of the ratio of the ambient fluid strain rate to the plate strain rate can delay the boundary layer separation, whereas a boost of the ratio of the ambient fluid shear rate to the plate strain rate only accelerates the separation of boundary layer. The heat transfer rate of hybrid nanofluid is greater for the stretching case than the shrinking case. However, for the shrinking case, the heat transfer rate intensifies with the increment of the copper (Cu) nanoparticles volume fraction, whereas a contrary result is found for the stretching case.

The present numerical results are original and new. It can contribute to other researchers on electing the relevant parameters to optimize the heat transfer process in the modern industry, and the right parameters to generate non-unique solution so that no misjudgment on flow and heat transfer features.