Search results

Layered manufacturing (LM) or rapid prototyping is a process in which a part is produced using layer‐by‐layer addition of the material. In LM, slicing of the CAD model of a part to be produced is one of the important steps. Slicing of CAD model with a very small slice thickness leads to large build time. At the same time if large slice thickness is chosen, the surface finish is very bad due to staircasing. These two contradicting issues namely reduction in build time and better surface quality have been a major concern in laminated manufacturing. This contradiction has led to the development of number of slicing procedures. The present paper reviews various slicing approaches developed for tessellated as well as actual CAD models.

The purpose of this paper is to propose an integrated decision-making model for multi-attributes decision-making (MADM) problems in additive manufacturing (AM) process planning and for related MADM problems in other research areas.

This research analyzed the drawbacks of former methods and then proposed two sub-decision-making models, “deviation model” and “similarity model”. The former sub-model aimed to measure the deviation extent of each alternative to the aspired goal based on analyzing Euclidean distance between them, whereas the latter sub-model applying grey incidence analysis was used to measure the similarity between alternatives and the expected goal by investigating the curve shape of each alternative. Afterwards, an integrated model based on the aggregation of the two sub-models was proposed and verified by a numerical example and simple case studies.

The calculating results of the cited numerical example and the comparison to former related research showed that this proposed model is more practical and reasonable than former methods applied in MADM problems of AM. In addition, the proposed model can be applied in other fields where MADM problems exist.

This proposed integrated model not only considered the deviation extent of alternatives to the aspired goal but also investigated the similarity between alternatives and the expected goal. The similarity analysis compensates the drawbacks of traditional “distance-based” models or methods that cannot distinguish alternatives which have the same distance-based index value.

The purpose of this study is to improve the global optimization ability of the Tabu search (TS) algorithm, and then improve the calculation efficiency and accuracy of rolling schedule in tandem cold rolling.

A case-based reasoning–Tabu search hybrid algorithm (CBRTS) has been presented. First, the case-based reasoning technology was adopted to obtain high-quality initial solution and then the TS algorithm was used for global optimization.

The optimization effect of CBRTS is compared with that of the traditional TS algorithm, and the analysis result indicates that the CBRTS has a faster convergence rate than TS, and the optimization results are closer to the global optimal. Meanwhile, the rolling schedule calculated by CBRTS is more reasonable, which can increase the production efficiency while giving full play to the capacity of equipment.

A CBRTS hybrid algorithm is presented. The strong dependence of the TS algorithm on the initial solution has been solved. The rolling schedule multi-objective optimization functions are established. The proposed algorithm is applied in a 1,450-mm tandem cold rolling production line. The improved method can reduce about half the iterations compared with the traditional one.

To improve the quality of the additive manufacturing (AM) products, it is necessary to estimate surface roughness distribution in advance. Although surface roughness estimation has been previously studied, factors leading to the creation of a rough surface and a comprehensive test for model validation have not been adequately investigated. Therefore, this paper aims to establish a robust model using empirical data based on optimized artificial neural networks (ANNs) to estimate the surface roughness distribution in fused deposition modelling parts. Accordingly, process parameters such as time, cost and quality should be optimized in the process planning stage.

Process parameters were selected via a literature review of surface roughness estimation modelling by analytical and empirical methods, and then a specific test part was fabricated to provide a complete evaluation of the proposed model. The ANN structure was optimized by trial and error method and evolutionary algorithms. A novel methodology based on the combination of the intelligent algorithms including the ANN, linked to the particle swarm optimization (PSO) and imperialist competitive algorithm (ICA), was developed. The PSOICA algorithm was implemented to increase the capability of the ANN to perform much faster and converge more precisely to favorable results. The performances of the ANN models were compared to the most well-known analytical models at build angle intervals of equal size. The most effective process variable was found by sensitivity analysis. The validity of proposed model was studied comprehensively where different truncheon parts and medical case studies including molar tooth, skull, femur and a custom-made hip stem were built.

This paper presents several improvements in surface roughness distribution modelling including a more suitable method for process parameter selection according to the design criteria and improvements in the overall surface roughness of parts as compared to analytical methods. The optimized ANN based on the proposed advanced algorithm (PSOICA) represents precise estimation and faster convergence. The validity assessment confirms that the proposed methodology performs better in varied conditions and complex shapes.

This research fills an important gap in surface roughness distribution estimation modelling by using a test part designed for that purpose and optimized ANN models which uses purely empirical data. The novel PSOICA combination enhances the ability of the ANN to perform more accurately and quickly. The advantage in using actual surface roughness values is that all factors resulting in the creation of a rough surface are included, which is impossible if other methods are used.

The empirical modelling of major rapid prototyping (RP) processes such as fused deposition modelling (FDM), selective laser sintering (SLS) and stereolithography (SL) has attracted the attention of researchers in view of their contribution to the overall cost of the product. Empirical modelling techniques such as artificial neural network (ANN) and regression analysis have been paid considerable attention. In this paper, a powerful modelling technique using genetic programming (GP) for modelling the FDM process is introduced and the issues related to the empirical modelling of RP processes are discussed. The present work aims to investigate the performance of various potential empirical modelling techniques so that the choice of an appropriate modelling technique for a given RP process can be made. The paper aims to discuss these issues.

Apart from the study of applications of empirical modelling techniques on RP processes, a multigene GP is applied to predict the compressive strength of a FDM part based on five given input process parameters. The parameter setting for GP is determined using trial and experimental runs. The performance of the GP model is compared to those of neural networks and regression analysis.

The GP approach provides a model in the form of a mathematical equation reflecting the relationship between the compressive strength and five given input parameters. The performance of ANN is found to be better than those of GP and regression, showing the effectiveness of ANN in predicting the performance characteristics of the FDM part. The GP is able to identify the significant input parameters that comply with those of an earlier study. The distinct advantages of GP as compared to ANN and regression are highlighted. Several vital issues related to the empirical modelling of RP processes are also highlighted in the end.

For the first time, a review of the application of empirical modelling techniques on RP processes is undertaken and a new GP method for modelling the FDM process is introduced. The performance of potential empirical modelling techniques for modelling RP processes is evaluated. This is an important step in modernising the era of empirical modelling of RP processes.

Adaptive slicing is a key step in 3D printing as it is closely related to the building time and the surface quality. This study aims to develop an adaptive layering algorithm that can coordinate the optimization of printing quality and efficiency to meet different printing needs.

A multiobjective optimization model is established for printing quality, printing time and layer height based on the variation of surface features, profile slope and curvature of the model. The optimal solution is found by an improved method combining Newton's method and gradient method and adapts to different printing requirements by adjusting the parameter thresholds.

Several benchmarks are applied to verify this new method. The proposed method has also been compared with the uniform layering method, it reduces the volume error by 46.4% and shortens the printing time by 28.1% and is compared with five existing adaptive layering methods to demonstrate its superior performance.

Compared with other methods with only one layered result, this method is a demand-oriented algorithm that can obtain different results according to different needs and it can reach a trade-off between the building time and the surface quality.

Compared with cusp height and area deviation ratio, volume error (VE) caused by the layer height could represent the stair-case effect more comprehensively. The proposed relative volume error (RVE)-based adaptive slicing method takes VE rather than cusp height as slicing criteria, which can improve part surface quality for functionalized additive manufacturing.

This paper proposes a volumetric adaptive slicing method of manifold mesh for rapid prototyping based on RVE. The pre-height sequences of manifold mesh are first preset to reduce the SE by dividing the whole layer sequence into several parts. A breadth-first search-based algorithm has been developed to generate a solid voxelization to get VE. A new parameter RVE is proposed to evaluate the VE caused by the sequence of the layer positions. The RVE slicing is conducted by iteratively adjusting the layer height sequences under different constraint conditions.

Three manifold models are used to verify the proposed method. Compared with uniform slicing with 0.2 mm layer height, cusp height-based method and area deviation-based method, the standard deviations of RVE of all three models are improved under the proposed method. The surface roughness measured by the confocal laser scanning microscope proves that the proposed RVE method can greatly improve part surface quality by minimizing RVE.

This paper proposes an RVE-based method to balance the surface quality and print time. RVE could be calculated by voxelized parts with required accuracy at a very fast speed by parallel.

Adaptive slicing is a key step in three-dimensional (3D) printing as it is closely related to the building time and the surface quality. This study aims to develop a novel adaptive slicing method based on ameliorative area ratio and accurate cusp height for 3D printing using stereolithography (STL) models.

The proposed method consists of two stages. In the first stage, the STL model is sliced with constant layer thickness, where an improved algorithm for generating active triangular patches, the list is developed to preprocess the model faster. In the second stage, the model is first divided into several blocks according to the number of contours, then an axis-aligned bounding box-based contour matching algorithm and a polygons intersection algorithm are given to compare the geometric information between several successive layers, which will determine whether these layers can be merged to one.

Several benchmarks are applied to verify this new method. Developed method has also been compared with the uniform slicing method and two existing adaptive slicing methods to demonstrate its effectiveness in slicing.

Compared with other methods, the method leads to fewer layers whilst keeping the geometric error within a given threshold. It demonstrates that the proposed slicing method can reach a trade-off between the building time and the surface quality.

This paper aims to focus on the basic principle of WO₃ gas sensors to achieve high gas-sensing performance with good stability and repeatability. Metal oxide-based gas sensors are widely used for monitoring toxic gas leakages in the environment, industries and households. For better livelihood and a healthy environment, it is extremely helpful to have sensors with higher accuracy and improved sensing features.

In the present review, the authors focus on recent synthesis methods of WO₃-based gas sensors to enhance sensing features towards toxic gases.

This work has proved that the synthesis method led to provide different morphologies of nanostructured WO₃-based material in turn to improve gas sensing performance along with its sensing mechanism.

In this work, the authors reviewed challenges and possibilities associated with the nanostructured WO₃-based gas sensors to trace toxic gases such as ammonia, H₂S and NO₂ for future research.

This paper aims to present the mathematical foundation of so-called advance algorithms, developed to compensate for defects during acceleration and deacceleration of the print head in filament-based melt extrusion additive processes. It then investigates the validity of the mathematical foundation, its performance on a low-cost system and the effect of changing layer height on the algorithm’s associated process parameter.

This study starts with a compilation and review of literature associated with advance algorithms, then elaborates on its mathematical foundation and methods of implementation. Then an experiment displaying the performance of the algorithm implemented in Marlin machine firmware, Linear Advance 1.0, is performed using three different layer heights. The results are then compared with simulations of the system using Simulink.

Findings suggests that advance algorithms following the presented approach is capable of eliminating defects because of acceleration and deacceleration of the print head. The results indicate a layer height dependency on the associated process parameter, requiring higher compensation values for lower layer heights. It also shows higher compensation values for acceleration than deacceleration. Results from the simulated mathematical model correspond well with the experimental results but predict some rapid variations in flow rate that is not reflected in the experimental results.

As there are large variations in printer design and materials, deviation between different setups must be expected.

To the best of authors’ knowledge, this study is the first to describe and investigate advance algorithms in academic literature.