Search results

Fretting wear exists widely in the field of matching mechanical parts whereas previous research studies mostly focus on the point contact through a ball-plate tribometer. This paper aims to study the influence of wear debris on the fretting wear characteristics of the nitrided medium carbon steel under line contact condition at elevated temperature.

Fretting wear behavior of the nitrided medium carbon steel was experimentally investigated under line contact condition at elevated temperature and different normal loads without lubrication. Wear loss, worn surface and wear debris were studied to analyze the wear mechanism of nitrided steel.

The results showed that surface hardness of the medium carbon steel was notably improved because of the generation of a 230 µm nitrided case. Wear loss increased with the normal load, which was associated with the damage of a thin solid film formed by the wear debris, consisting of iron oxides and chromium oxide rather than only iron or iron oxides. The wear debris became partially amorphous and spherical because it was trapped within the contact interface and was ground, rolled, oxidized under line contact conditions. The spherical wear debris acted as a third body and formed a lubricating film between the contact faces. This lubricating film helped to stabilize the friction coefficient and reduced the wear rate, which further caused the acceleration of wear volume to gradually decrease. The wear mechanisms of the nitrided steel were oxidation wear, abrasive wear and fatigue spalling of the oxide layer.

The findings are helpful to understand the fretting wear behavior of the friction pair under line contact and enrich the fretting tribology theory.

As of December 2022, there were 119,000 gas stations, 10,800 gas stations and 4,488,000 charging piles nationwide, while the number of vehicles reached 312 million, including 11.49 million new energy vehicles. The imbalance between transportation energy supply and energy replenishment demand leads to crowded queues of vehicles at some stations and idle resources in others. How to reduce the phenomenon of large queues and improve the utilization rate of idle resources is the key to alleviating the imbalance between supply and demand.

Therefore, from the perspective of spatio-temporal equilibrium of urban transportation energy supply stations, multi-energy supply station cooperation is established in view of the phenomenon of large spatio-temporal differences among different energy supply stations, and corresponding inducing strategies are adopted for energy supplement vehicles in the road network, so that part of queued users go to energy supply stations with fewer vehicles, so as to balance the supply and demand of transportation energy in the region. On this basis, the income distribution of urban transportation energy supply station is discussed.

The total revenue after the cooperation was 13,095, an increase of 22.9%. Secondly, in terms of distribution rationality, three impact factors are selected and Shapley correction value is used to distribute the total income. Compared with independent operation, both sites have a certain degree of increase.

Traffic congestion at energy supply stations is closely related to the number, location and number of vehicles at energy supply stations. Therefore, using a cooperative approach of energy trading cannot solve the queuing problem. In addition, there are a few research results on the equalization of energy supply station services considering time-of-use pricing. However, these studies do not consider the vehicular grooming at congested stations. As far as the authors know, there are no relevant research results in the research on the service equilibrium of energy supply stations based on cooperative games.