Search results

1 – 10 of 107
Per page
102050
Citations:
Loading...
Access Restricted. View access options
Article
Publication date: 8 May 2017

Talib Ria Jaafar, Noor Iswadi Ismail, Mohd Fauzi Ismail and Eliasidi Abu Othman

This study aims to investigate the effect of different volume percentage (Vol.%) of steel fibre on the pressure, surface temperature and speed sensitivity behaviour during braking…

490

Abstract

Purpose

This study aims to investigate the effect of different volume percentage (Vol.%) of steel fibre on the pressure, surface temperature and speed sensitivity behaviour during braking process as known brake effectiveness and to propose the best steel fibre Vol.% in the formulation.

Design/methodology/approach

Three brake pads composed of three different steel fibre volume percentages were fabricated through powder metallurgy route. Selecting one sample as based formulations, steel fibre (Vol.%) was decreased and increased by 50 per cent in the other two samples, respectively. The other ingredients are proportionally increased and decreased accordingly to the base formulation. The samples were tested for determining their hardness, porosity and coefficient of friction (COF) using Rockwell hardness tester, hot bath and brake inertia dynamometer, respectively.

Findings

Test results indicated that Sample T1 which composed of 9 Vol.% of steel fibre had the lowest COF and was sensitive to applied pressure, surface temperature and speed. The samples which composed of 18 and 27 Vol.% of steel fibre were having the same trend of COF and were sensitive to surface temperature and speed. Sample T which composed of 18 Vol.% of steel fibre had lower brake pad and disc lost as compared to Sample T2 which composed of 27 Vol.%. Mechanical properties did not show any significant correlation with COF sensitivity with temperature, speed and pressure.

Originality/value

The sample with 18 Vol.% of steel fibre was found to be the best formulation which produced acceptable COF; less sensitive to temperature, pressure and speed during braking process; and better wear resistance of brake pad as well as the rotor.

Details

Industrial Lubrication and Tribology, vol. 69 no. 3
Type: Research Article
ISSN: 0036-8792

Keywords

Access Restricted. View access options
Article
Publication date: 13 November 2017

Ali Mohamed Ali Aboshia, Riza Atiq Rahmat, Muhammad Fauzi Mohd Zain and Amiruddin Ismail

The purpose of this paper is to develop an alternative new ternary geopolymer mortar (MKSP) to resolve a traditional mortar problem which exhibits several disadvantages, including…

422

Abstract

Purpose

The purpose of this paper is to develop an alternative new ternary geopolymer mortar (MKSP) to resolve a traditional mortar problem which exhibits several disadvantages, including poor strengths and surface microcracks and the CO2 air pollution.

Design/methodology/approach

The MKSP ternary binder was produced using metakaolin (MK), slag (S), and palm oil fuel ash (POFA) activated with an alkaline mixture of sodium silicate (Na2SiO3) and 10 M NaOH in a mass ratio of 2.5. Seven different mix proportions of MK, slag, and POFA were used to fabricate MKSP mortars. The water-to-binder ratio was varied between 0.4 and 0.5. The mortars were heat cured for 2 h at 80°C and then aged in air. Flexural stress and strain, mortars flow and compressive strength were tested. Furthermore, the mortars were characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) analyses.

Findings

The results showed that the sample MKSP6, which contained 40 percent MK, 40 percent slag, and 20 percent POFA, exhibited high compressive strength (52 MPa) without any cracks and flexural strength (6.9 MPa) at 28 days after being cured for 2 h at 80°C; however, the MKSP7 mortar with optimal strength of 55 MPa showed some surface cracks . Further, the results of the XRD, SEM, and FTIR analyses indicated that the MKSP mortars primarily consisted of a crystalline (Si+Al) phase (70 percent) and a smaller amorphous (Si+Ca) phase (30 percent).

Research limitations/implications

The MKSP ternary geopolymer mix has three limitations as an importance of heat curing for development early strength, POFA content less than 20 percent to gain high normal strength and delaying the sitting time by controlling the slag content or the alkali activator type.

Practical implications

The use of geopolymer materials binder in a real building is limited and it still under research, Thus, the first model of real applied geopolymer cement in 2008 was the E-Crete model that formed by Zeobond company Australia to take the technology of geopolymer concrete to reality. Zeobond Pty Ltd was founded by Professor Jannie S.J. van (van Deventer et al., 2013), it was used to product precast concrete for the building structure. The second model was PYRAMENT model in 2002 by American cement manufacturer Lone Star Industries which was produced from the development carried out on inorganic alumino-silicate polymers called geopolymer (Palomo et al., 1999). In 2013 the third model was Queensland’s University GCI building with three suspended floors made from structural geopolymer concrete containing slag/fly ash-based geopolymer (Pathak, 2016). In Australia, 2014, the newly completed Brisbane West Wellcamp airport becomes the greenest airport in the world. Cement-free geopolymer concrete was used to save more than 6,600 tons of carbon emissions in the construction of the airport. Therefore, the next century will see cement companies developing alternative binders that are more environmentally friendly from a sustainable development point of view.

Originality/value

Production of new geopolymer binder of mortar as alternative to traditional cement binder with high early and normal strength from low cost waste materials, less potential of cracking, less energy consumption need and low carbon dioxide emission.

Details

International Journal of Building Pathology and Adaptation, vol. 35 no. 5
Type: Research Article
ISSN: 2398-4708

Keywords

Available. Open Access. Open Access
Article
Publication date: 19 January 2022

Suhaili Alma'amun, Mohd Khairy Kamarudin, Wan Nadiah Wan Mohd Nasir, Nasrul Hisyam Nor Muhamad and Riayati Ahmad

This research aims to examine and compare differences in waṣiyyah wājibah (obligatory bequest) (WW) practices in Malaysia and Indonesia.

2080

Abstract

Purpose

This research aims to examine and compare differences in waṣiyyah wājibah (obligatory bequest) (WW) practices in Malaysia and Indonesia.

Design/methodology/approach

This is an exploratory qualitative research, employing a thematic analysis approach. Six Muslim Wills (State) Enactments [Enakmen Wasiat Orang Islam (Negeri)] in Malaysia, Islamic Law Compilation (Kompilasi Hukum Islam) in Indonesia, two fatwas (ruling in religious matters) and one court case from each country are analysed. Data is collected from official government websites and other reliable search engines.

Findings

First, the findings show that the WW practice in both countries is similar regarding the quantum of the beneficiaries' entitlement. However, the practice varies between both countries in terms of the types of beneficiaries and how the bequest is distributed. Second, this study shows the potential of WW as an estate planning instrument to complement the existing instruments in each country, especially when addressing family members who are not entitled to succeed by farāʾiḍ (Islamic inheritance law).

Practical implications

The provision of relevant laws and regulations regarding WW needs to be formulated to guarantee the well-being of dependants. The differences in practice between the two countries can be a guideline to expand the WW scope and context to other Muslim countries.

Originality/value

This study is the first attempt to compare WW between two Muslim-majority countries focusing on relevant laws, court cases and regulations.

Details

ISRA International Journal of Islamic Finance, vol. 14 no. 2
Type: Research Article
ISSN: 0128-1976

Keywords

Access Restricted. View access options
Article
Publication date: 17 December 2024

Muhammad Bilal Zafar, Mohd Fauzi Abu-Hussin and Hassnian Ali

This review paper aims to provide a comprehensive retrospective analysis of the research landscape in the Halal industry through a threefold approach, including bibliometric…

55

Abstract

Purpose

This review paper aims to provide a comprehensive retrospective analysis of the research landscape in the Halal industry through a threefold approach, including bibliometric analysis, latent theme identification and examination of driving factors of research citations.

Design/methodology/approach

A total of 2,510 research documents, identified from the Scopus through a systematic search, were considered for review. The review methods included bibliometric analysis of the domain, application of the machine learning structural topic modeling (STM) to identify latent themes and negative binomial regression to estimate the impact of paper, author and geographical characteristics on citation rates.

Findings

In addition to bibliometric insights, the STM uncovered 10 key topics within the Halal industry literature, including certification processes, dietary practices, consumer behavior, ethical considerations, supply chain management, market dynamics, Halal tourism, verification methods, regulatory frameworks and Halal food production and marketing. Positive associations with citation rates were found for abstract length, number of keywords, paper age, number of references, funding, number of authors and international collaboration, while a negative association was observed for authorship from Malaysia.

Originality/value

This paper, besides providing insights into research dynamics and citation patterns, also guides future research avenues in the Halal industry.

Details

Journal of Islamic Marketing, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1759-0833

Keywords

Access Restricted. View access options
Article
Publication date: 9 October 2023

Muhammad Ashraf Fauzi, Zuria Akmal Saad, Mohd Hanafiah Ahmad, Muhammad Zorif Fauzi and Md Faizal Ahmad

This study aims to evaluate the knowledge structure of knowledge management (KM) applications within small and medium enterprises (SMEs). In pursuit of excellence, SMEs must adopt…

425

Abstract

Purpose

This study aims to evaluate the knowledge structure of knowledge management (KM) applications within small and medium enterprises (SMEs). In pursuit of excellence, SMEs must adopt KM like large corporations, even with limited resources.

Design/methodology/approach

Through a bibliometric approach, this study evaluates current themes based on bibliographic coupling analysis and predicts future trends based on coword analysis. A total of 726 documents and 2,658 keywords were derived from the Web of Science database.

Findings

Findings show four clusters in bibliographic coupling and three in coword analysis. A common theme discovered converged on digital technology to ensure SMEs follow current market trends.

Research limitations/implications

Advanced application of Industry 4.0 requires digital transformation for SMEs’ pursuit of excellence. Implications include sustaining SMEs through a considerable KM system integrated with digital technology for sustainable business activities.

Originality/value

To the best of the authors’ knowledge, this study is among the first to provide a science mapping analysis on KM in SMEs by applying a bibliometric analysis.

Details

The Learning Organization, vol. 31 no. 5
Type: Research Article
ISSN: 0969-6474

Keywords

Access Restricted. View access options
Article
Publication date: 8 May 2017

Khadijah Mohd Khambali@Hambali, Suraya Sintang, Azarudin Awang, Khairul Nizam Mat Karim, Nur Farhana Abdul Rahman, Wan Adli Wan Ramli, Nurhanisah Senin, Azmil Zainal Abidin, Ahmad Zuhdi Ismail, Wan Zailan Kamaruddin Wan Ali and Ruzman Md. Noor

The main value in a culture of tolerance is wasatiyyah. The fragility of relationships and misunderstanding between Muslim and non-Muslim communities occurs when attention to…

1069

Abstract

Purpose

The main value in a culture of tolerance is wasatiyyah. The fragility of relationships and misunderstanding between Muslim and non-Muslim communities occurs when attention to values of tolerance which need more attention on moderation was not practiced especially in the life of a new Muslim convert community. Thus, the practice of moderation is one mechanism proposed by the government to ensure a harmonious continuation of life in a religious community can be achieved. For that, a qualitative study design was used to describe the current status of a phenomenon that occurs among new Muslim converts. The purposive sampling method is used to determine the applications of wasatiyyah in new Muslims’ life tolerance at Kota Kinabalu (East Malaysia) and Kuala Terengganu (West Malaysia). Although the study was conducted at two different locations, there is a relationship between religious phenomena that occur in the new Muslims community in Malaysia. The purpose of this study is to see the practical concept of moderation in the life of new Muslims and their relation with Muslims and non-Muslims. The results showed that the value of moderation was applied in the aspect of tolerance. The application of Wasatiyyah in practice of tolerance had helped non-Muslims family members to change their attitudes and perception towards Islam. This study suggests the values of wasatiyyah in the life of religious tolerance, need to be nourished especially in multiethnic society when sharing a living places, education and employment for better social development as well as a well-being pluralistic society.

Design/methodology/approach

The study was conducted through descriptive data qualitative methods. Purposive sampling was used which refers to a group that has the characteristics of samples required by researchers (Mohd Najib Abdul Ghafar 2003). This study applies the method of in-depth interview with the selected new Muslims around Kota Kinabalu (representing East Malaysia) and around Kuala Terengganu (representing Peninsular Malaysia/West Malaysia). Thus, data accumulation involves new Muslims (new Converts) from various ethnics (Sabahan and Sarawakian) which comprise Kadazandusun, Murut, Rungus, Sino and Iban. Secondly, those are from the Peninsular Malaysia which includes Chinese and Indian. Whereas in Kuala Terengganu, data accumulation involves new Muslims from various ethnics (Chinese, Indian, Sarawakian and others). The result of the interview is shown through descriptive narratives which display the practice of tolerance in the form of supportive interaction from the non-Muslim families towards the new Muslims in Islamic lifestyle.

Findings

The concept of wasatiyyah has nurturing tolerance among Muslim, newly Muslim and non-Muslim as well as fostering harmony among the diverse ethnics in Malaysia. Based on the discussion, it was observed that the concept of wasatiyyah had a great influence on the relationship among Muslim, newly Muslim and non-Muslim, as it had a strong link with the value of akhlaq that have been embedded in the Muslim community. The wasatiyyah is the main element that shapes the relationship, and it is the results of interaction with social norms, for it has bred certain social values that include tolerance, compromise, modesty, respect and cooperation as transpired when they (Muslim and newly Muslim) interact among themselves or with other communities. Furthermore, the main goal for the concept is to maintain peace and built well-being in the society as well as bracing racial ties in Malaysia, especially among Muslim, newly Muslim and non-Muslim.

Originality/value

Tolerance is a culture that founded the co-existence of pluralistic society in Malaysia. The culture of tolerance can only be built if ethnic tolerance and religious tolerance is accepted as a common practice – Muslims and non-Muslims alike. The description of wasatiyyah in the practice of religious tolerance among the families of new Muslims is the platform towards the acculturation of tolerance in the societal life from different faith and ethnics. It can be said that the higher the tolerance of ethnic, the higher is the religious tolerance, which is manifested through the application of wasatiyyah between people from different religions. This situation is highlighted in the relations of Muslim, newly Muslim and non-Muslim in Sabah and Terengganu where the culture of tolerance is apparent in the life together. Extensive interaction through encounters, acquaintance and co-existence that shape the friendship, brotherhood and kinship is the best formula in nurturing the culture of tolerance in the pluralistic society of Malaysia. Perhaps, the concept of wasatiyyah may be implemented in the whole aspect of life in the context of Malaysia. It is because the term wasatiyyah has the main sources of Islamic epistemology as well as sustaining the well-being pluralistic society without destroying the differences.

Details

Humanomics, vol. 33 no. 2
Type: Research Article
ISSN: 0828-8666

Keywords

Access Restricted. View access options
Article
Publication date: 1 January 2001

Noor Azlan Ghazali

The Asian crisis, which exploded in Thailand in July 1997 initially, spilled to the other ASEAN countries (Indonesia, Malaysia, and Philippines) and later it spreads to Korea and…

715

Abstract

The Asian crisis, which exploded in Thailand in July 1997 initially, spilled to the other ASEAN countries (Indonesia, Malaysia, and Philippines) and later it spreads to Korea and even crossing the continent to Russia and Brazil. The chronological pattern seems to indicate the contagious behaviour of the crisis. However, the sequential economic down‐turns that occurred in the Asia Pacific do look like a contagion effect. The idea that currency speculators contributed to the depth of the crisis is agreeable but to conclude that they are the roots of the problem would be misleading. This paper argued that the roots of the problems lie in current account deficit and loss of competitiveness, and moral hazard and over‐investment This paper also argued that the currency crisis is a symptom and not the cause of the Asian crisis.

Details

Humanomics, vol. 17 no. 1
Type: Research Article
ISSN: 0828-8666

Access Restricted. View access options
Article
Publication date: 10 October 2016

Noor Hazilah Abd Manaf, Roslan Johari Dato Mohd Ghazali, Nor Filzatun Mohd Borhan, Azura Omar, Dinon Mohd, Abideen Adeyemi Adewale, Izhairi Ismail and Zabeda Abdul Hamid

The purpose of this paper is to identify the dimensions of preparedness for hospital practice among newly graduated medical officers in Malaysian hospitals who are undergoing…

441

Abstract

Purpose

The purpose of this paper is to identify the dimensions of preparedness for hospital practice among newly graduated medical officers in Malaysian hospitals who are undergoing their housemanship training; and to compare the level of preparedness among the different curricula and predict the dimensions of preparedness for hospital practice.

Design/methodology/approach

A national study was carried out and data collection was by means of self-administered questionnaire. Data obtained (n=1,213) were subjected to exploratory factor analysis using Statistical Package for Social Sciences version 18 in extracting the dimensions of preparedness for hospital practice.

Findings

Nine dimensions of hospital practice were identified which were access to information and IT skills, interpersonal skills, basic skills, and continuing professional development, holistic skills, coping skills, ethic and legal skills, patient management skills, scientific knowledge, and clinical skills. Overall, the respondents felt their medical schools prepared them for hospital practice. The strongest predictor for preparedness for hospital practice is coping skills. Holistic skill and preparedness for hospital practice was found to be negatively associated. Those who graduated from twining programmes between Malaysian and overseas universities were found to be better prepared for hospital practice.

Social implications

An understanding on preparedness for hospital practice among newly graduated medical officers is a step forward in assuring patient safety and quality of care.

Originality/value

Although of significant importance, however, a study of this nature is rarely researched and the first for Malaysian houseman.

Details

The TQM Journal, vol. 28 no. 6
Type: Research Article
ISSN: 1754-2731

Keywords

Access Restricted. View access options
Book part
Publication date: 12 February 2021

Norizan Azizan, Faizuniah Pangil and Md. Lazim Mohd. Zin

Malaysia has shifted from a labor-intensive, agriculture-based economy since its independence in 1957 to a knowledge and innovation-based economy. Human capital development (HCD…

Abstract

Malaysia has shifted from a labor-intensive, agriculture-based economy since its independence in 1957 to a knowledge and innovation-based economy. Human capital development (HCD) is a key enabler for driving and sustaining Malaysia's socioeconomic growth. The education and training system is the main platform for HCD intervention. To sustain and achieve goals, long-term survival, competitive advantage, and sustainability, the workforce is optimized through comprehensive HCD interventions to provide the necessary knowledge, skills, and competencies needed to work effectively in a rapidly changing and complex environment. Numerous efforts have been made by the government to ensure that the education and training system has the capacity to enhance the quality and availability of intellectual and skilled human capital to support the transition toward knowledge-intensive activities, sustain economic growth, and compete in the global market. The country's development plans and policies as well as the economic development which lead toward a knowledge-based economy with a knowledge-based workforce have charted out clear transformation journeys for the development of the human capital ecosystem. This chapter presents an overview of the landscape of HCD in Malaysia. Relevant reports, plans, policies, and strategies to strengthen human capital through education and training is reviewed. Finally, a few issues and challenges that Malaysia experiences are discussed.

Details

Modeling Economic Growth in Contemporary Malaysia
Type: Book
ISBN: 978-1-80043-806-4

Keywords

Access Restricted. View access options
Article
Publication date: 10 June 2021

Majda Ayoub Juma Alzadjal, Mohd Fauzi Abu-Hussin, Maizaitulaidawati Md Husin and Mohd Yahya Mohd Hussin

The purpose of this paper is to explore the direct effect of classical predictors of an individual’s behaviour, namely, attitude, subjective norms (SN) and perceived behavioural…

1043

Abstract

Purpose

The purpose of this paper is to explore the direct effect of classical predictors of an individual’s behaviour, namely, attitude, subjective norms (SN) and perceived behavioural control (PBC) on the intention to deal with Islamic banks. The study extended the Theory of Planned Behaviour (TPB) by introducing the customers’ religiosity paradigm as a moderator between the classical predictors of the theory and the intention to deal with Islamic banks.

Design/methodology/approach

By applying the Theory of Planned Behaviour (TPB) framework, data were collected from conventional banks to investigate the potential Islamic bank customers’ intention. Using self-administered questionnaires, the data were collected from conventional banks in Muscat. A total of 1,000 questionnaires were distributed; however, only 638 were found usable. The structural equation modelling (SEM) was used to test the hypothesis and analyse the prediction values of the model in the TPB framework. It is also used to analyse the moderation effect of religiosity on the relation between the predictors and intention.

Findings

The results of the SEM analysis indicated that attitude, SN and PBC significantly predicted the potential customers’ intention to deal with Islamic banks in Oman. The results of the moderation effect shown that religiosity was a poor moderator of the relation between the attitude and intention as well as the PBC and intention, though, the result shown that religiosity is a partial moderator of the relation between the SN and intention.

Research limitations/implications

Due to the current study method, the result findings should be generalised with caution. Future studies may introduce other variables to examine the moderation effect between the relation of the predictor and intention of the TPB framework. It also signifies the moderation effect of religiosity on the relationship between the attitude, SN and PBC and intention of the potential customs in the TPB framework. This is considered a theoretical enrichment to the behaviour studies and TPB literature.

Practical implications

The current study assists the Islamic bank practitioners and regulators to broaden the horizon in considering the practical outcomes from the academic research. The result from this study does not only prove that the TPB seems to be acceptable in explaining the intention and behaviour in the field of Islamic banking but also support the robustness of the ability of TPB in predicting the behaviour and intention in a different research context (Islamic banking and finance).

Originality/value

This study is an attempt to introduce religiosity as a moderator in the TPB framework with SEM analysis and to explore the moderation effect between the predictors and intention to deal with Islamic banks among Omani’s Islamic Bank Customers. This study endeavours to fill a gap of these moderation effects and how the customers’ religiosity influence customer’s preferences towards Islamic Bank.

Details

Journal of Islamic Marketing, vol. 13 no. 11
Type: Research Article
ISSN: 1759-0833

Keywords

1 – 10 of 107
Per page
102050