Search results

The health of people living in prisons (PLP) frequently remains marginalised in national development discourse, particularly in resource-constrained settings like Ghana. This study aims to determine the prevalence of cardiovascular disease (CVD) risk factors among PLP at a prison facility in the Northern Region of Ghana.

A cross-sectional study involving 134 male persons in prison, aged 18–79 years, was conducted to assess their dietary habits, tobacco use, alcohol consumption, sleep behaviour and physical activity practices. Serum lipid profile, fasting blood glucose (FBG), blood pressure (BP) and body mass indices of participants were also measured.

Almost half (48.1%) of the participants had abnormal lipid levels. Those with FBG in the diabetes range (= 7.0 mmol/l) constituted 3.9%, while 16.7% were in the impaired FBG range (6.1–6.9 mmol/l). Participants with BP within the pre-hypertension range were 54.5%. The majority of participants (92%) had a low daily intake of fruits and vegetables. Few participants were active smokers (5%) and alcohol users (2%). The average sleep duration at night among the participants was 5.54 ± 2.07 h. The majority (74%) of the participants were sedentary. About a quarter of the participants (24.6%) had overweight/obesity.

This study highlights the CVD risks among PLP. Findings suggest the need for targeted interventions, such as dietary and lifestyle modification strategies, regular physical activity and routine screening for diabetes, dyslipidaemia and hypertension. These interventions within the prison space could significantly improve the cardiovascular health of PLP in resource-limited settings.

The purpose of this paper is to numerically study the phenomenon of separation and subsequent reattachment that happens due to a sudden contraction or expansion in flow geometry, in addition, to investigating the effect of nanoparticles suspended in water on heat transfer enhancement and fluid flow characteristics.

Turbulent forced convection flow over triple forward facing step (FFS) in a duct is numerically studied by using different types of nanofluids. Finite volume method is employed to carry out the numerical investigations. with nanoparticles volume fraction in the range of 1-4 per cent and nanoparticles diameter in the range 30-75 nm, suspended in water. Several parameters were studied, such as the geometrical specification (different step heights), boundary conditions (different Reynolds [Re] numbers), types of fluids (base fluid with different types of nanoparticles), nanoparticle concentration (different volume fractions) and nanoparticle size.

The numerical results indicate that the Nusselt number increases as the volume fraction increases, but it decreases as the diameter of the nanoparticles of nanofluids increases. The turbulent kinetic energy and its dissipation rate increase as Re number increases. The velocity magnitude increases as the density of nanofluids decreases. No significant effect of increasing the three steps heights on Nusselt along the heated wall, except in front of first step where increasing the first step height leads to an increase in the recirculation zone size adjacent to it.

The phenomenon of separation and subsequent reattachment happened due to a sudden contraction or expansion in flow geometry, such as forward facing and backward facing steps, respectively, can be recognized in many engineering applications where heat transfer enhancement is required. Some examples include cooling systems for electronic equipment, heat exchanger, diffusers and chemical process. Understanding the concept of these devices is very important from the engineering point of view.

Convective heat transfer can be enhanced passively by changing flow geometry, boundary conditions, the traditional fluids or by enhancing thermal conductivity of the fluid. Great attention has been paid to increase the thermal conductivity of base fluid by suspending nano-, micro- or larger-sized particles in fluid. The products from suspending these particles in the base fluid are called nanofluids. Many studies have been conducted to investigate the heat transfer and fluid flow characteristics over FFS. This study is the first where nanofluids are employed as working fluids for flow over triple FFS.

This study aims to develop a machine learning model to detect structure fire fatalities using a dataset comprising 11,341 cases from 2011 to 2019.

Exploratory data analysis (EDA) was conducted prior to modelling, in which ten machine learning models were experimented with.

The main fatal structure fire risk factors were fires originating from bedrooms, living areas and the cooking/dining areas. The highest fatality rate (20.69%) was reported for fires ignited due to bedding (23.43%), despite a low fire incident rate (3.50%). Using 21 structure fire features, Random Forest (RF) yielded the best detection performance with 86% accuracy, followed by Decision Tree (DT) with bagging (accuracy = 84.7%).

Limitations of the study are pertaining to data quality and grouping of categories in the data pre-processing stage, which could affect the performance of the models.

The study is the first of its kind to manipulate risk factors to detect fatal structure classification, particularly focussing on structure fire fatalities. Most of the previous studies examined the importance of fire risk factors and their relationship to the fire risk level.

This article suggests a socio‐technical approach to the planning of reliable communication software by considering the various unique features that influence its reliability and performance. It proposes a realistic model for the prediction and estimation of communication software reliability with measurable parameters. The objective is to achieve the required reliability goals effectively, efficiently and economically. The model suggested employs limited test data and is based on the assumption that software malfunctions or fails owing to the manifestation of a proportion of residual faults according to a random independent process; the rate of fault manifestation is time dependent and the complexity of the software is relevant.

Tracking physical resources at the construction site can generate information to support effective decision-making and building production control. However, the methods for conventional tracking usually offer low reliability. This study aims to propose the integrated Smart Twins 4.0 to track and manage metallic formworks used in cast-in-place concrete wall systems using internet of things (IoT) (operationalized by radio frequency identification [RFID]) and building information modeling (BIM), focusing on increasing quality and productivity.

Design science research is the research approach, including an exploratory study to map the constructive system, the integrated system development, an on-site pilot implementation in a residential project and a performance evaluation based on acquired data and the perception of the project’s production team.

In all rounds of requests, Smart Twins 4.0 registered and presented the status from the formworks and the work progress of buildings in complete correspondence with the physical progress providing information to support decision-making during operation. Moreover, analyses of the system infrastructure and implementation details can drive researchers regarding future IoT and BIM implementation in real construction sites.

The primary contribution is the system proposal, centralized into a mobile app that contains a Web-based virtual model to receive data in real time during construction phases and solve a real problem. The paper describes Smart Twins 4.0 development and its requirements for tracking physical resources considering theoretical and practical previous research regarding RFID, IoT and BIM.

Purpose – The purpose of this paper is to understand the roles of corporate governance reforms in Malaysia following the 1997/1998 Asian crisis from the perspectives of corporate managers.

Design/methodology/approach – The primary evidence used is drawn from a series of in-depth semi-structured interviews with Malaysian corporate managers involved in the overseeing of the governance structures within their companies.

Findings – This study shows that most interviewees believed that an appropriate corporate governance system could play a role in resolving the problems associated with the interlocking and concentrated corporate ownership structure in Malaysia. However, the effectiveness of the corporate governance reforms in dealing with this issue is questionable. It also reveals that Malaysian companies ‘changed’ their corporate governance practices predominantly to recover (foreign) investor confidence lost during the crisis and to fulfil the legal requirements enforced by the government, where the latter was under pressure from the international community (especially, the World Bank and IMF) to ‘improve’ the Malaysian corporate governance practices after the crisis.

Originality/value of paper – This paper adds to the literature on corporate governance, especially in the context of developing countries. Prior research investigating corporate governance issues in developing countries has been limited, particularly the lack of in-depth examination of corporate governance practices from the perspectives of corporate managers. This paper will be of great value to researchers and practitioners seeking to gain a better understanding of the roles of corporate governance in Malaysia.

Researchers have paid little attention to elucidating how customer-perceived innovative apparel attributes are linked to brand reputation and consumer buying behaviors. This study intends to bridge that gap by providing empirical evidence on the effects of product novelty, product difference and product inimitability on brand reputation and behavioral intentions in the context of garment purchasing. We also investigate the moderating effects of self-congruity and value consciousness on the attribute‒brand reputation linkages, as well as their immediate influence on the domain variables.

The proposed model was estimated using data from a web-based survey of 299 female apparel customers. Structural equation modeling was employed to test the relationships between variables.

The results indicate that product novelty, product inimitability, self-congruity and value consciousness significantly influence brand reputation. The results also demonstrate that self-congruity, value consciousness and brand reputation have direct effects on behavioral intention, while self-congruity and value consciousness appear to moderate the relationship between innovative product attributes and brand reputation.

This study is the first to present a conceptual model that systematically encompasses product innovation, brand perceptions and behavioral links in the field of women's clothing. The findings have important implications for both academics and practitioners in the field of fashion marketing.

The purpose of this study is to look at the structure of the interactions between the board of directors’ chairman qualities such as chairman independence, tenure, ethnicity, age- and impression management (IM).

The research population consists of non-financial Malaysian companies listed on Bursa Malaysia’s Main Market, using data gathered via annual reports and DataStream. The study relies on the ordinary least square regression to test the direct relationships between the directors’ chairman characteristics and IM. Moreover, robustness and sensitivity tests were used to examine the effectiveness of chairman characteristics with IM. Furthermore, the results rely on the FGLS regression as an additional test. The study found that chairman independence, chairman ethnicity and chairman age have a significant impact on IM.

The results reveal that chairman independence has a negative association with qualitative IM (IMSC1). Moreover, chairman ethnicity has a positively significant relationship with qualitative IM (IMSC1) and quantitative IM (IMSC2). Also, the effectiveness of chairman characteristics has a negative and significant association with IMSC1.

The primary goal of this paper is to fill a gap in the literature and to open up opportunities for more in-depth research on the subject. So far, there has been no research into the impact of the board chairman’s (BC) personality on IM. This study serves as a warning to policymakers, businesses and their stakeholders, as well as researchers, about the importance of BC characteristics, which may impede the effectiveness of corporate governance mechanisms. The paper provides a framework for investigating these characteristics in the context of IM.

The purpose of this research is to introduce an innovative framework called the waqf cooperative housing framework (WCHF), with an objective to create a synergistic equilibrium between waqf and cooperative housing schemes. To tackle problems related to the dearth of financing, this research postulates an innovative waqf-based source of finance that involves generating revenue from common areas (waqf area) within the vicinity of the condominium.

Primary data were collected through interviews and the data were analysed using the NVIVO software. The interviewees comprised managers from property development sectors, public sector officials, university lecturers in Islamic finance, CEOs, top management officials from Islamic financial institutions, community leaders and shariah scholars.

A framework was proposed based on the result of the interviews. It was found that innovative models such as WCHF can resolve the issue of affordable housing in Karachi such as decreasing the financial burden on the public exchequer, bringing positive change to the lives of the poor, fulfilling the property developer’s corporate social responsibility, fulfilling the religious duty of the general public and condominium owners towards their fellow beings as well as creating new employment opportunities for people who are working in the financial sector (waqf management companies/trustees) and the construction sector.

Even though this study has introduced an innovative and practical solution to the financing of affordable housing, it also encountered some limitations. First, it is conducted in Karachi city involving six group of respondents; thus, the findings cannot be generalised with other contexts. Similar research needs to be conducted in different contexts.

To date, this is among the first studies, to the best of the authors’ knowledge, to investigate cooperative affordable housing with the help of innovative Islamic finance tools in the context of Pakistan. Furthermore, insufficient attention has been given to the enabling and hindering factors behind the acceptance of a framework that seeks to initiate a cooperative scheme based on an innovative waqf financing tool that generates revenue from common areas around a condominium.