Search results

To demonstrate, through numerical models, that it is possible to simulated low‐gravity phase change (melting), of an electrically conducting material (gallium), in terrestrial conditions via the application of electromagnetic fields.

A complete three‐dimensional mathematical formulation governing a phase change process in the presence of an electromagnetic field has been developed. In addition a comprehensive parametric study has been completed to study the various effects of gravity, Stefan number, Hartmann number and electromagnetic pressure number upon the phase change process.

The results show that the application of an electromagnetic filed can be used to simulate key melting characteristics found for actual low‐gravity. However, the resulting three‐dimensional flow field in the melted region differs from actual low‐gravity. The application of an electromagnetic field creates a flow phenomenon not found in actual low‐gravity or previously seen in two‐dimensional problems.

Future work may include the use of oscillating electromagnetic fields to enhance convection in energy storage systems in a low‐gravity environment.

The ability to suppress unwanted convective flows in a phase change process without the high magnetic fields necessary in magnetic field only suppression systems.

This work fills a void in the literature related to conducting fluids and the effects of magnetic and electromagnetic fields.

In this study, closed-form solutions are presented to investigate thermohydraulics of liquid films in a rotating heat pipe. The film thickness is expressed as a function of flow rate.

Further, sensitivity of both film thickness and flow rate to the length of the rotating heat pipe can now be investigated using the explicit expressions presented here.

To make it easier for practical application, an approximate solution is presented on top of the exact solution.

Both approximate and exact solutions are then applied to note that results are in good agreement when compared to those available in the literature.

This paper aims to theoritically investigate the free convection flow and heat transfer of a non-Newtonian fluid with pseudoplastic behavior in a cylindrical vertical cavity partially filled with a layer of a porous medium.

The non-Newtonian behavior of the pseudoplastic liquid is described by using a power-law non-Newtonian model. There is a temperature difference between the internal and external cylinders. The porous layer is attached to the internal cylinder and has a thickness of D. Upper and lower walls of the cavity are well insulated. The governing equations are transformed into a non-dimensional form to generalize the solution. The finite element method is used to solve the governing equations numerically. The results are compared with the literature results in several cases and found in good agreement.

The influence of the thickness of the porous layer, Rayleigh number and non-Newtonian index on the heat transfer behavior of a non-Newtonian pseudoplastic fluid is addressed. The increase of pseudoplastic behavior and increase of the thickness of the porous layer enhances the heat transfer. By increase of the porous layer from 0.6 to 0.8, the average Nusselt number increased from 0.15 to 0.25. The increase of non-Newtonian effects (decrease of the non-Newtonian power-law index) enhances the heat transfer rate.

The free convection behavior of a pseudoplastic-non-Newtonian fluid in a cylindrical enclosure partially filled by a layer of a porous medium is addressed for the first time.

This paper aims to investigate melting heat transfer of a non-Newtonian phase change material (PCM) in a cylindrical enclosure-space between two tubes using a deformed mesh method.

Metal foam porous layers support the inner and outer walls of the enclosure. The porous layers and clear space of the enclosure are filled with PCM. The natural convection effects during the phase change are taken into account, and the governing equations for the molten region and solid region of the enclosure are introduced. The governing equations are transformed into non-dimensional form and then solved using finite element method. The results are compared with the literary works and found in good agreement. The non-Newtonian effects on the phase change heat transfer and melting front are studied.

The results show that the increase of non-Newtonian effects (the decrease of the power-law index) enhances the heat melting process in the cavity at the moderate times of phase change heat transfer. The temperature gradients in porous metal foam over the hot wall are small, and hence, the porous layer notably increases the melting rate. When the melting front reaches the cold porous layer, strong non-linear behaviors of the melting front can be observed.

The phase change heat transfer of non-Newtonian fluid in a cylindrical enclosure partially filled with metal foams is addressed for the first time.

This chapter discusses about tourism in Iran, an old civilization and a theocratic country where Islam is a dominant force. The majority of the people in Iran are Shia Muslims. References are made to conditions in Iran, its tourism industry, and the role of Islam in tourism and society. It is followed by discussion of Shia pilgrimage features. The findings show that while tourism has great potential in Iran, which is renowned for its diversity of attractions, tourism development is, however, constrained by several factors that limit the industry's contribution to economic growth.

The purpose of this paper is to improve the lattice Boltzmann method’s ability to simulate a microflow under constant heat flux.

Develop the thermal lattice Boltzmann method based on double population of hydrodynamic and thermal distribution functions.

The buoyancy forces, caused by gravity, can change the hydrodynamic properties of the flow. As a result, the gravity term was included in the Boltzmann equation as an external force, and the equations were rewritten under new conditions.

To the best of the authors’ knowledge, the current study is the first attempt to investigate mixed-convection heat transfer in an inclined microchannel in a slip flow regime.

Fuel cells technologies are the most promising green energy technologies for diverse applications. One of the fastest growing areas is the portable electronic applications where the power range is the order of 1–100 W. For most of the portable electronic devices, rechargeable battery is the major energy source. Due to limitations like limited capacity, requirement of external power for recharge have led many researchers to look for alternative power sources to power portable electronic devices. The high energy density of fuel cells makes them very attractive alternative to batteries for portable power applications. There are a variety of fuel cell technologies being considered to replace batteries in portable electronic equipment. Direct Liquid Fuel Cells (DLFCs) have attracted much attention due to their potential applications as a power source for portable electronic devices. The advantages of DLFCs over hydrogen fed PEM fuel cells include a higher theoretical energy density and efficiency, a more convenient handling of the streams, and enhanced safety. Unlike batteries, fuel cells need not be recharged, merely refueled. This paper provides an overview on challenges of DLFCs (Direct Liquid Fuel Cells), like fuel crossover, cost, durability, water management, weight and size along with approaches being investigated to solve these challenges. Portable Fuel Cell Commercialization Targets for future and producers of portable fuel cells across the globe are also discussed in this paper.