Search results

The commercial stainless steels have been used extensively in the biomedicine application and their electrochemical behaviour in the simulated body fluid (SBF) are not uncovered obviously. In this research, the corrosion resistance of the commercial stainless steel of Fe–17Cr–xNi alloys (x = 4, 8, 10 and 14) has been studied. This study aims to evaluate the rate of corrosion and corrosion resistance of some Fe–Cr–Ni alloys in SBF at 37°C.

In this research, the corrosion resistance of the commercial stainless steel of Fe–17Cr–xNi alloys has been studied using open circuit potential, electrochemical impedance spectroscopy and potentiodynamic polarization in the SBF at 37°C and pH 7.4 for a week. Also, the surface morphology of the four alloys was investigated using scanning electron microscopy, elemental composition was obtained via energy dispersive spectroscopy and the crystal lattice structure of Fe–17Cr–xNi alloys was obtained using X-ray diffraction technique. The chemical structure of the protective oxide film has been examined by X-ray photoelectron spectroscopy (XPS) and metals ions released into the solution have been detected after different immersion time using atomic absorption spectroscopy.

The results revealed that the increase of the Ni content leads to the formation of the stable protective film on the alloys such as the Fe–17Cr–10Ni and Fe–17Cr–14Ni alloys which possess solid solution properties. The Fe–17Cr–14Ni alloy displayed highest resistance of corrosion, notable resistance for localized corrosion and the low corrosion rate in SBF because of the formation of a homogenously protective oxide film on the surface. The XPS analysis showed that the elemental Fe, Cr and Ni react with the electrolyte medium and the passive film is mainly composed of Cr₂O₃ with some amounts of Fe(II) hydroxide at pH 7.4.

This work includes important investigation to use commercial stainless steel alloys for biomedical application.

The purpose of this paper is to minimize corrosion-related pollution in the environment. From the lemongrass extract (LGE), the authors selected one of the best green inhibitors.

The corrosion and inhibition of mild steel in traditional acidification solutions were estimated by electrochemical measurements. The corrosion appearance was observed with scanning electron microscopy, atomic force microscopy micrographs and attenuated total reflectance infrared spectroscopy spectrum. The correlation was formed between the gained inhibition efficiency (IE)% from electrochemical measurements and certain quantum chemical parameters.

The results displayed that the IE was up to 90% when the LGE concentration was 300 ppm. The results confirmed that the theoretical experiments are very similar to the experimental observations.

For the first time, LGE was used as a cheap and safe corrosion inhibitor for mild steel corrosion in the acidification process. The mechanism of mild steel corrosion and anti-corrosion in acid solution has been suggested.

Paper aims to preparation of new acid disperse dyes based on thiadiazol derivatives and evaluation of their use as antimicrobial colorants in digital transfer-printing ink formulations for printing onto polyester fabric substrates.

New disperse dyes based on 1,3,4 - thiadiazol derivative (dyes 1–3) were prepared and evaluated by different analysis then formulated as colored materials in the ink formulations. The viscosity, dynamic surface tension and particle size distribution of the prepared inks were measured. The printed polyester fabric substrates were tested using a variety of tests, including light fastness, washing, alkali perspiration and Crock fastness, as well as depth of penetration. Density-functional theory (DFT) calculations were carried out at the Becke3-Lee-Yang-parr (B3LYP) level using the 6–311** basis set, and the biological activity of the prepared disperse dyes was investigated.

The obtained results of the physical of the prepared ink revealed that thiadiazol disperse ink is a promising ink formulation for polyester printing and agrees with the quality of the printed polyester fabric. The optimization geometry for molecular structures agreed with the analysis of these compounds. The HOMO/LUMO and energy gap of the studied system were discussed. The molecular docking analysis showed strong interaction with DNA Gyrase and demonstrated to us the high ability of these inks to act as antimicrobial agents.

The prepared inks containing the prepared thiadiazol disperse dye were high-performance and suitable for this type of printing technique, according to the results. The prepared inks resist the growth of microorganisms and thus increase the ink's storage stability.

The prepared disperse dyes based on 1,3,4 - thiadiazol derivative (dyes 1–3) can be a promising colorant in different applications, like some types of paint formulations and as a colorant in printing of different fabric substrates.