Search results

1 – 1 of 1
Per page
102050
Citations:
Loading...
Access Restricted. View access options
Article
Publication date: 10 July 2020

Dong Sung (Danny) Kim, Jakkrit Suriboot, Chin-Cheng Shih, Austin Cwiklik, Melissa A. Grunlan and Bruce L. Tai

This paper aims to investigate the printability of photocurable PDMS with digital light processing (DLP) in terms of dimensional accuracy, mechanical properties, isotropy and…

460

Abstract

Purpose

This paper aims to investigate the printability of photocurable PDMS with digital light processing (DLP) in terms of dimensional accuracy, mechanical properties, isotropy and postcure shrinkage.

Design/methodology/approach

The photocurable PDMS was made from methacrylated PDMS-macromer and 2,4,6-Trimethylbenzoyldi-Phenylphosphinate (TPO-L) photoinitiator. The PDMS was printed using different orientations, sizes and post-exposure conditions and then evaluated by tensile test and microscope to determine the printability.

Findings

Printed parts show good accuracy and low shrinkage, but high directionality in modulus, ductility and strength. The dimensional error is less than 2% and the shrinkage rates are less than 0.52%. In contrast, the modulus varies between 0.87 and 0.96 MPa depending on print orientation, elongation varies from 34.7% to 66.4% and strength varies from 0.23 to 0.49 MPa.

Originality/value

This study quantitatively characterizes the printability of photo curable PDMS with DLP, which has not been reported elsewhere. This paper also discusses the challenges of PDMS printing for future advancement.

Details

Rapid Prototyping Journal, vol. 26 no. 8
Type: Research Article
ISSN: 1355-2546

Keywords

1 – 1 of 1
Per page
102050