Search results

This paper aims to investigate the mechanical behavior of three-dimensional (3D) calcium sulfate porous structures created by a powder-based 3D printer. The effects of the binder-jetting and powder-spreading orientations on the microstructure of the specimens are studied. A micromechanical finite element model is also examined to predict the properties of the porous structures under the load.

The authors printed cylindrical porous and solid samples based on a predefined designed model to study the mechanical behavior of the prototypes. They investigated the effect of three main build bed orientations (x, y and z) on the mechanical behavior of solid and porous specimens fabricated in each direction then evaluated the micromechanical finite-element model for each direction. The strut fractures were analyzed by scanning electron microscopy, micro-computed tomography and the von Mises stress distribution.

Results showed that the orientation of powder spreading and binder jetting substantially influenced the mechanical behavior of the 3D-printed prototypes. The samples that were fabricated parallel to the applied load had higher compressive strength compared with those printed perpendicular to the load. The results of the finite element analysis agreed with the results of the experimental mechanical testing.

The mechanical behavior was studied for the material and the 3D-printing machine used in this research. If one were to use another material formulation or machine, the printing parameters would have to be set accordingly.

This work aimed to re-tune the control factors of an existing rapid prototyping process for the given machine. The authors achieved these goals without major changes in the already developed hardware and software architecture.

The results can be used as guidelines to set the printing parameters and a model to predict the mechanical properties of 3D-printed objects for the development of patient- and site-specific scaffolds.

This study aims to develop a simplified bioink preparation method that can be applied to most hydrogel bioinks used in extrusion-based techniques.

The parameters of the bioprinting process significantly affect the printability of the bioink and the viability of cells. In turn, the bioink formulation and its physicochemical properties may influence the appropriate range of printing parameters. In extrusion-based bioprinting, the rheology of the bioink affects the printing pressure, cell survival and structural integrity. Three concentrations of alginate-gelatin hydrogel were prepared and printed at three different flow rates and nozzle gauges to investigate the print parameters. Other characterizations were performed to evaluate the hydrogel structure, printability, gelation time, swelling and degradation rates of the bioink and cell viability. An experimental design was used to determine optimal parameters. The analyses included live/dead assays, rheological measurements, swelling and degradation.

The experimental design results showed that the hydrogel flow rate substantially influenced printing accuracy and pressure. The best hydrogel flow rate in this study was 10 ml/h with a nozzle gauge of 18% and 4% alginate. Three different concentrations of alginate-gelatin hydrogels were found to exhibit shear-thinning behavior during printing. After seven days, 46% of the structure in the 4% alginate-5% gelatin sample remained intact. After printing, the viability of skin fibroblast cells for the optimized sample was 91%.

This methodology offers a straightforward bioink preparation method applicable to the majority of hydrogels used in extrusion-based procedures. This can also be considered a prerequisite for cell printing.