Search results

This study aims to evaluate the association between dietary patterns with health status and smoking-related knowledge, attitudes and practices (s-KAP) among Bangladeshi adolescent smokers.

An analytical cross-sectional study was conducted among 205 randomly selected adolescents. Socio-demographic, health status, s-KAP related data were collected in face-to-face interviews. Dietary intake data were calculated using the food frequency questionnaire.

The practices score (44.8%) was comparatively poor among adolescent smokers. Among the respondents, around 56.1%, 38.1% and 49.3% were suffering from gastric problems, nausea and the loss of appetite, respectively, because of smoking. There was a significant relationship between dietary diversity and the occurrence of several diseases such as gastric problems, nausea and loss of appetite. The respondents who consumed fresh fruits and vegetables regularly might reduce gastric problems (OR: 0.53, 95% CI: 0.27–1.04 and OR: 0.64, 95% CI: 0.25–1.65), nausea (OR: 0.72, 95% CI: 0.38–1.37 and OR: 0.28, 95% CI: 0.13–0.84) and loss of appetite (OR: 0.52, 95% CI: 0.32–1.21 and OR: 0.16 95% CI: 0.27–0.68).

In conclusion, smoking has been associated with multiple health problems because of poor practices score. Consumption of a balanced diet, better smoking-related knowledge, attitudes and practices needs to be improved among adolescents.

The purpose of this study is to underpin the impact of cloud computing in global accounting information systems (AIS). Moreover, it investigates the key aspects that ought to be considered by the organization before choosing to pick the correct accounting system.

The study looks at and depends on narrative investigation of previous studies. In the examination talked about the principle issues with respect to the utilization of cloud and database the executives in the AIS through developing research model.

The focal point of the paper is the impact of cloud computing worldview on the business area. This paper highlights different facts of cloud accounting, published research papers and the benefits and possible risks determined by the implementation of cloud services, mostly in relation to the accounting department.

Considering the numerous ramifications of cloud advancements on the present business process, there is a need for an examination of how these innovations will be used in AIS to improve precision, benefits and risks. At the same time, there is need to investigate the determinant elements of actualizing cloud advances in the AIS. More importantly, to the author’s knowledge, this is the first study that focuses on the number of published research works to show the importance of cloud computing in accounting and information systems.

Regarding the crisis caused by the COVID-19 pandemic, regional development banks or Bank Pembangunan Daerah (BPD) are affected by the problem of non-performing loan (NPL) that plagues national banks. This study aims to find which microeconomic and macroeconomic factors significantly influence the regional development banks’ risk-taking behaviour and the effect COVID-19 pandemic on NPL. Microeconomic factors to be examined include credit growth, profitability, capitalisation, capital adequacy, bank size, credit volume, bank liquidity, and operational inefficiency. Macroeconomic factors to be examined include regional economic growth, deposit density (DD), deposits per branch (DB), and specialisation index (SI). This study employs a fixed effect panel data model with robust standard errors. The findings show evidence that credit volume is the only microeconomic factor that significantly influences regional development banks’ risk-taking behaviour. Meanwhile, DD, DB, and SI are the macroeconomic factors that significantly influence regional development banks’ risk-taking behaviour. The effects of the COVID-19 pandemic significantly influence regional development banks’ risk-taking behaviour.

Construction management is ameliorated by the lean construction concept in many direct and indirect ways to reduce waste of construction process and improve the value. The purpose of this paper is to identify the challenges of the implementation of lean construction in the Bangladeshi construction industry and to prioritize these factors that constitute these challenges.

A comprehensive literature review was used for shorting the global challenges of implementing lean construction. Subsequently, these challenges were incorporated into a structured questionnaire for survey. A total of 164 valid responses were collected from Bangladeshi construction practitioners involved in different types of construction organizations. The results were analyzed using the Relative Important Index (RII) and Mann–Whitney U test.

The findings revealed 41 challenges of lean construction implementation in the Bangladeshi construction industry. The highest ranking challenges are the lack of awareness about lean construction, lack of skills, training and lean techniques, unwillingness to change the existing culture, lack of management commitment, fragmented and cyclic nature of the construction project and unavailing communication between all project participants. The study also discusses some universally applicable solutions to overcome these challenges.

By the findings of this study, the Bangladeshi construction industry could get a new insight into the challenges of implementing lean construction. It could play a very important part in the body of knowledge, as it reveals the challenges of implementing lean construction for the first time with the socio-economic context of Bangladesh. Exploring the findings, the study could help the stakeholders, companies, academician, researchers and government to focus their effort and resources on the significantly appropriate issues. Furthermore, this study may beneficial to those developing countries especially in South Asia, who have shared the same socio-economic status with Bangladesh.

As women perform most household chores and other nonproductive work, gender-based division of labor in the home has now been identified as a barrier to gender equality. The objective of this study is to assess the effects of gender distribution of housework especially for women and investigate the factors influencing the total hours spent on house chores in Bangladesh.

This study adopted a quantitative approach based on survey data obtained from 200 households in the Madaripur and Gopalganj districts of Bangladesh. To analyze the obtained data, the partial least squares (PLS) regression was used.

According to this study, demographic and socioeconomic factors of women, and gender are influencing the total hours spent in housework. Women were observed to have a positive relationship with empowerment but a negative relationship with social perception. Social perception was further observed to have a significant impact on the total number of hours expended by women on house chores.

The study suggests that the importance of sharing the burden of household work be taught in schools and community-based awareness programs so that it becomes ingrained as a social and cultural practice. Furthermore, the government should conduct a proper assessment that recognizes unpaid housework by women as an important factor in inclusive sustainable development.

Issues of inequality in the division of labor in household activities are barely recognized in Bangladesh. Therefore, this study collected primary data to assess the effects of gender on the distribution of housework. The findings of the study will help policymakers and academicians to better understand the gender-based division of household labor.

The peer review history for this article is available at: https://publons.com/publon/10.1108/IJSE-03-2023-0195.

The purposes of the present study are to ensure higher sustainability of journal bearings under different applied loads and to observe bearing performances such as elastic strain, total deformation and stress formation.

A journal bearing test rig was used to determine the effect of the applied load on the bearing friction, film thickness, lubricant film pressure, etc. A steady-state analysis was performed to obtain the bearing performance.

An efficient aspect ratio (L/D) range was obtained to increase the durability or the stability of the bearing while the bearing is in the working condition by using SAE 5W-30 oil. The results from the study were compared with previous studies in which different types of oil and water, such as Newtonian fluid (NF), magnetorheological fluid (MRF) and nonmagnetorheological fluid (NMRF), were used as the lubricant. To ensure a preferable aspect ratio range (0.25-0.50), a computational fluid dynamics (CFD) analysis was conducted by ANSYS; the results show a lower elastic strain and deformation within the preferable aspect ratio (0.25-0.50) rather than a higher aspect ratio using the SAE 5W-30 oil.

It is expected that the findings of this study will contribute to the improvement of the bearing design and the bearing lubricating system.

This qualitative work aims to explore the university students’ attitude toward advantages, drawbacks and prospects of ChatGPT.

This paper applies well accepted Colaizzi’s phenomenological descriptive method of enquiry and content analysis method to reveal the ChatGPT user experience of students in the higher education level.

The study’s findings indicate that ChatGPT enhances the quality of learning and facilitates faster learning among university students. However, despite numerous positive outcomes, it is noted that ChatGPT may diminish students' creativity by swiftly addressing their critical queries. Over time, students may experience a decline in patience and critical thinking skills as they excessively rely on ChatGPT, potentially leading to ethical misconduct.

This paper primarily explores the advantages and drawbacks of using ChatGPT in the university context of Bangladesh. The present study creates a platform for future research in this domain with comprehensive study design. The study results alert the policy makers to improve upcoming version of ChatGPT with convenient user experience and academicians as this paper unleash several positive as well as negative consequences of using this AI-enabled chatbot.

The purpose of this paper is to present the frictional behaviour of composite materials under external horizontal vibration. Variation of friction coefficient is investigated experimentally when mild steel pin slides on composite materials such as glass fiber reinforced plastic (GFRP) and cloth reinforced ebonite (commercially known as gear fiber).

A pin‐on‐disc apparatus having the facility of vibrating the test samples in a horizontal direction is designed and fabricated. Horizontal vibration is created along (longitudinal direction), and perpendicular (transverse direction) to, the sliding direction. The experimental set‐up has the facility to vary the amplitudes and frequencies of vibration while velocity of vibration is kept constant.

The relative frictional behaviour of these materials and their dimensional analysis are yet to be investigated. Therefore an attempt is made to investigate the relative frictional property of the GFRP and cloth reinforced ebonite (commercially known as gear fiber) and the results of these composite materials are analyzed by dimensional analysis under horizontal vibration.

It is expected that the applications of these results will contribute to the improvement of different concerned mechanical systems.

It can also be noted that there are no clear correlations between friction‐ and other vibration‐related operating parameters. Considering the above conclusion and lack of correlation, the paper meant to find out a suitable correlation and a way of observing the response of friction force by applying known frequency and amplitude of vibration in a particular direction. It is expected that the application of these results will contribute to the improvement of different concerned mechanical systems.

The purpose of this paper is to investigate experimentally the effect of external vertical vibration on the friction property of mild steel, glass fiber‐reinforced plastic and cloth‐reinforced ebonite.

A pin‐on‐disc apparatus having the facility of vibrating the test samples in a vertical direction was designed and fabricated. The experimental setup has the facility to vary the amplitudes and frequencies of vibration, while the velocity of vibration is kept constant. During the experiment, the frequency and amplitude of vibration were varied from 0 to 500 Hz and 0 to 200 μm, respectively. Studies have shown that the friction coefficient decreases with the increase of amplitude and frequency of vertical vibration for the above‐said materials. The rate of decrease of friction coefficient is different for different materials. The results of these materials are analyzed by dimensional analysis to correlate the friction coefficient with sliding velocity, frequency and amplitude of vibration. The experimental results are also compared with those available in the literature and simple physical explanations are provided.

It was found that reducing the friction coefficient of different materials was achieved by way of reducing the friction force by applying known frequency and vibration and correlating the friction coefficient with frequency, amplitude and sliding velocity.

The paper presents a way of reducing friction force by applying known frequency and vibration so that the mechanical process can be considerably improved (by considering the appropriate design of vibration).

The paper's originality lies in demonstrating the correlation among friction coefficient, amplitude, frequency and sliding velocity for different types of materials.

Solid thin films have been deposited on stainless steel 314 (SS 314) substrates in a chemical vapor deposition (CVD) reactor at different flow rates of natural gas mostly methane (CH₄). The purpose of this paper was to investigate experimentally the variation of thin film deposition rate with the variation of gas flow rate.

During experiment, the effect of gap between activation heater and substrate on the deposition rate has also been observed. To do so, a hot filament thermal CVD unit is used. The flow rate of natural gas varies from 0.5 to 2 l/min at normal temperature and pressure and the gap between activation heater and substrate varies from 4 to 6.5 mm.

Results show that deposition rate on SS 314 increases with the increase of gas flow rate. It is also seen that deposition rate increases with the decrease of gap between activation heater and substrate within the observed range. These results are analyzed by dimensional analysis to correlate the deposition rate with gas flow rate, surface roughness and film thickness. In addition, friction coefficient and wear rate of SS 314 sliding against SS 304 under different normal loads are also investigated before and after deposition. The obtained results reveal that the values of friction coefficient and wear rate are lower after deposition than that of before deposition.

In this study, thin film deposition rate on SS 314 was investigated using CVD. The obtained results were analyzed by dimensional analysis to correlate the deposition rate with gas flow rate, surface roughness and film thickness. The friction coefficient and wear rate of SS 314 were also examined before and after deposition.