Search results

This paper aims to present a new approach, called hybrid model reference adaptive controller or H-MRAC, for the hybrid controller (proportional-integral-derivative [PID + MRAC]) that will be used to control the position of a pneumatic manipulator.

It was developed a McKibben muscle using nautical mesh, latex and high-density polyethene connectors and it was constructed an elbow manipulator with two degrees of freedom, driven by these muscles. Then it was presented the H-MRAC control law based on the phenomenological characteristics of the plant, aiming at fast response and low damping. Lyapunov's theory was used as the project methodology, which ensures asymptotic stability for the control system.

It was developed a precise control system for a pneumatic manipulator and the results were compared to previous research.

In collaborative robotics, human and machine occupy the same workspace. This research promotes the development of safer and more complacent mechatronic systems in the event of collisions.

As a practical implication, the research allows the substitution of electric motors by McKibben muscles in industrial robots with high accuracy.

The pneumatic manipulator will make the human-robot physical interaction safer as it can prevent catastrophic collisions causing victims or equipment breakdown.

When compared to results in the literature, the present research showed a 37.51% and 36.74% lower global error in position tracking than MRAC and Adaptive proportional-integral-derivative (A-PID), respectively, validating its effectiveness.

Several studies have aimed to develop robotic systems which move in transmission lines. Until this moment, all of them have a high weight and cost associated with the equipment and reduced battery autonomy time. In this context, this paper aims to propose the POLIBOT (POwer Lines Inspection roBOT) with low cost and weight, enabling the movement over the lines and an easier installation and remove.

The designed robot uses the Profiles Manufacturing Methodology (PMM). The construction of the robot mechanical structure uses modularized aluminum parts built through square profiles. Thus, it’s possible a drastic reduction in production time as well as cost reduction and weight when comparing this method with other manufacturing processes like foundry, for example. For hardware and software systems, the use of free and open source software causes a significant reduction in cost and project execution time. The benefits of using open source systems are immeasurable, both from academic and industrial applications.

The POLIBOT platform is one solution to the problem of inspection in power lines. With this robot, more lines are maintained with lower time. In its constructive aspect, the robotic mechanism is designed using principles of bioengineering. The use of this principle was successful, considering that obstacle transposition is performed with stability and low energy consumption.

The suggestion for future researches is to replace the battery for solar energy and construction in polymeric material to avoid high magnetic fields.

The commercial application is evident because manual inspections are inefficient, very expensive and dangerous. Thus, it is growing the number of researches that develop mechatronics systems for this kind of inspection.

The impact is the reduction of accidents because the present procedure requires precision of movements, where the pilot and electrical technician are close to high electrical and magnetic fields. In addition, for some tasks, the worker has to walk on the line to reach some important points. Thus, those tasks involve high risk of death.

The PMM methodology represents an innovation to the state of the art because others robotic mechanisms proposed for inspection tasks present total structure mass between 50 and 100 kg and POLIBOT has only 9 kg. Other fact is its price for implementation as this robot used the robot operating system (ROS) framework, what dispense the use of licenses. Other important features are that the robot performs the tasks autonomously, which reduces errors introduced by the operator and its low manufacturing cost as compared with other projects.