Search results

This paper aims to investigate the use of a piezo fan in an enclosure on wall heat transfer and thermal boundary layer profile in constant wall temperature situation.

The governing partial differential equations of mass, momentum and energy in addition to boundary conditions are solved by lattice Boltzmann method. The problem is solved numerically using D2Q9 population's model and Bhatnagar–Gross–Krook collision model with a code written in MATLAB.

The effects of Prandtl number (Pr) and the frequency of piezo fan vibrations are critically investigated on the hydrothermal characteristics of the square cavity. The mesh independency study and the validation of the proposed model are accomplished with numerical results of Ghia et al. (1982) and analytical solution of pure conduction very good agreement is found between present results and benchmark findings. Generally, with increasing beam frequency, the heat removal from heat source increased. It is found that, for all Prandtl numbers, wall Nusselt number will increase with the increase of the beam frequency. This enhancement is more intense in higher Prandtl number.

Based on these results, the use of piezo fan in an enclosure can be classified as standalone as well as heat sink integrated cooling solution.

The purpose of this paper is to find the time dependent thermal creep stress relaxation of a turbine blade and to investigate the effect thermal radiation of the adjacent turbine blades on the temperature distribution of turbine blade and creep relaxation.

For this analysis, the creep flow behavior of Moly Ascoloy in operational temperature of gas turbine in full scale geometry is studied for various thermal radiation properties. The commercial software is used to pursue a coupled fields analysis for turbine blades in view of the structural force, materials kinematic hardening, and steady-state temperature field.

During steady-state operation, the thermal stress was found to be decreasing, whereas by considering the thermal radiation this rate was noticed to increase slightly. Also by increase of the distance between stator blades the thermal radiation effect is diminished. Finally, by decrease of the blade distance the failure probability and creep plastic deformation decrease.

This paper describes the effect of thermal radiation in thermal-structural analysis of the gas turbine stator blade made of the super-alloy M-152.

Blade failures in gas turbine engines often lead to loss of all downstream stages and can have a dramatic effect on the availability of the turbine engines. There are many components in a gas turbine engine, but its performance is highly profound to only a few. The majority of these are hotter end rotating components.

Three-dimensional finite element thermal and stress analyses of the blade were carried out for the steady-state full-load operation.

In the previous works the thermal radiation effects on creep behavior of the turbine blade have not performed.

Artworks made of hygroscopic materials, like wooden panel paintings, are susceptible to environmental conditions. Traditional panel paintings typically consist of a wooden panel coated with layers of gesso, paint and varnish. Due to environmental fluctuations, the gesso layer and the wood panel may respond differently to moisture changes, triggering potential fractures. The investigation of such phenomena is of high interest, but it is still scarcely studied by engineers.

The proposed study aimed to create a simplified 3D finite element model for paintings to identify environmental conditions that could exceed critical strain levels. A penny-shaped crack within the gesso layer was modelled and, after applying a given deformation, the strain energy density failure criterion was used to assess if the crack was in a critical state.

Various combinations of geometric parameters of the model were explored, and to save computational time and cost, machine learning algorithms (namely extreme gradient boosting machines and Gaussian process regression algorithms) were introduced. The analyses were carried out on different panel paintings 3D models obtained by varying the wooden species and the boundary conditions, for exploring a wide number of combinations.

Moreover, the integration of machine learning can potentially reduce the reliance on numerical simulations and offer new insights into the conservation of artworks, a field in which such tools are still scarcely exploited.

Natural convection heat transfer combined with radiation heat transfer is used in electronic cooling. The purpose of this paper is to investigate the thermal loading characteristics of an enclosure.

The goal is to investigate the effect of thermal radiation on thermal and flow characteristics of the cavity. The enclosure lower wall is at constant temperature and the upper wall is adiabatic while there are several discrete heat sources inside the cavity. In addition the effect of parameters such as heating number (Nr), aspect ratio (A), the number of heaters (N), and thermal radiation on the maximum and mean temperature of system, thermal loading characteristics of the system, Nusselt number, and the maximum stream function rate is performed. To solve the governing nonlinear differential equations (mass, momentum, and energy), a finite‐volume code based on Patankar's SIMPLE method is utilized.

Heat transfer by natural convection solely and it's conjugation with thermal radiation on the thermal and flow characteristics of the system is studied. Also a parametric study illustrating the influence of the heating number, aspect ratio, the number of heaters, and thermal radiation on the maximum and mean temperature of system, thermal loading characteristics of the system, Nusselt number, and the maximum stream function rate is investigated. The results have revealed that the thermal radiation have an important effect on the thermal characteristics of system at low heating numbers.

The relevant governing parameters were: the heating number, Nr from 0.05 to 500, the cavity aspect ratio, A=H/L from 0.1 to 1 and the number of heaters, N, is an odd number ranging from 1 to 19

This work is numerical investigation only but can have engineering application such as electronic cooling, transformers, fusion reactors technology, hot structures, fuel cells, fibrous insulations and solar‐energy drying systems.

The effect of radiation in enclosure with discrete heaters within fluid has not been addressed in the literature.

The purpose of this study is to solve convective diffusion equation analytically by considering appropriate boundary conditions and using the Taylor-Aris method to determine the solute concentration, the effective and relative axial diffusivities.

>An analysis has been conducted on how body acceleration affects the dispersion of a solute in blood flow, which is known as a Bingham fluid, within an artery. To solve the system of differential equations analytically while validating the target boundary conditions, the blood velocity is obtained.

The blood velocity is impacted by the presence of body acceleration, as well as the yield stress associated with Casson fluid and as such, the process of dispersing the solute is distracted. It graphically illustrates how the blood velocity and the process of solute dispersion are affected by various factors, including the amplitude and lead angle of body acceleration, the yield stress, the gradient of pressure and the Peclet number.

It is witnessed that the blood velocity, the solute concentration and also the effective and relative axial diffusivities experience a drop when either of the amplitude, lead angle or the yield stress rises.

This study aims to model the nanofluid flow in microchannel heat sinks having the same length and hydraulic diameter but different cross-sections (circular, trapezoidal and square).

The nanofluid is graphene nanoplatelets-silver/water, and the heat transfer in laminar flow was investigated. The range of coolant Reynolds number in this investigation was 200 ≤ Re ≤ 1000, and the concentrations of nano-sheets were from 0 to 0.1 vol. %.

Results show that higher temperature leads to smaller Nusselt number, pressure drop and pumping power, and increasing solid nano-sheet volume fraction results in an expected increase in heat transfer. However, the influence of temperature on the friction factor is insignificant. In addition, by increasing the Reynolds number, the values of pressure drop, pumping power and Nusselt number augments, but friction factor diminishes.

Data extracted from a recent experimental work were used to obtain thermo-physical properties of nanofluids.

The effects of temperature, microchannel cross-section shape, the volume concentration of nanoparticles and Reynolds number on thermal and hydraulics behavior of the nanofluid were investigated. Results are presented in terms of velocity, Nusselt number, pressure drop, friction loss and pumping power in various conditions. Validation of the model against previous papers showed satisfactory agreement.

Nanosized honeycomb-configured materials are used in modern technology, thermal science and chemical engineering due to their high ultra thermic relevance. This study aims to scrutinize the heat transmission features of magnetohydrodynamic (MHD) honeycomb-structured graphene nanofluid flow within two squeezed parallel plates under Joule dissipation and solar thermal radiation impacts.

Mass, energy and momentum preservation laws are assumed to find the mathematical model. A set of unified ordinary differential equations with nonlinear behavior is used to express the correlated partial differential equations of the established models, adopting a reasonable similarity adjustment. An approximate convergent numerical solution to these equations is evaluated by the shooting scheme with the Runge–Kutta–Fehlberg (RKF45) technique.

The impression of pertinent evolving parameters on the temperature, fluid velocity, entropy generation, skin friction coefficients and the heat transference rate is explored. Further, the significance of the irreversibility nature of heat transfer due to evolving flow parameters are evaluated. It is noted that the heat transference rate performance is improved due to the imposition of the allied magnetic field, Joule dissipation, heat absorption, squeezing and thermal buoyancy parameters. The entropy generation upsurges due to rising magnetic field strength while its intensification is declined by enhancing the porosity parameter.

The uniqueness of this research work is the numerical evaluation of MHD honeycomb-structured graphene nanofluid flow within two squeezed parallel plates under Joule dissipation and solar thermal radiation impacts. Furthermore, regression models are devised to forecast the correlation between the rate of thermal heat transmission and persistent flow parameters.

The purpose of this paper is to investigate a model for convection induced by the selective absorption of radiation in a fluid layer. The concentration based internal heat source is modelled quadratically. Both linear instability and global nonlinear energy stability analyses are tested using three dimensional simulations. The results show that the linear threshold accurately predicts on the onset of instability in the basic steady state. However, the required time to arrive at the steady state increases significantly as the Rayleigh number tends to the linear threshold.

The author introduce the stability analysis of the problem of convection induced by absorption of radiation in fluid layer, then the author select a situations which have very big subcritical region. Then, the author develop a three dimensions simulation for the problem. To do this, first, the author transform the problem to velocity – vorticity formulation, then the author use a second order finite difference schemes. The author use implicit and explicit schemes to enforce the free divergence equation. The size of the Box is evaluated according to the normal modes representation. Moreover, the author adopt the periodic boundary conditions for velocity and temperature in the $x, y$ dimensions.

This paper explores a model for convection induced by the selective absorption of radiation in a fluid layer. The results demonstrate that the linear instability thresholds accurately predict the onset of instability. A three-dimensional numerical approach is adopted.

As the author believe, this paper is one of the first studies which deal with study of stability of convection using a three dimensional simulation. When the difference between the linear and nonlinear thresholds is very large, the comparison between these thresholds is very interesting and useful.

This paper aims to study numerically the simulation of convective–radiative heat transfer under an effect of variable thermally generating source in a rotating square chamber. The performed analysis deals with a development of passive cooling system for the electronic devices.

The domain of interest of size H rotating at a fixed angular velocity has heat-conducting solid walls with a constant cooling temperature for the outer boundaries of the vertical walls and with thermal insulation for the outer borders of the horizontal walls. The chamber has a heater on the bottom wall with a time-dependent volumetric heat generation. The internal surfaces of the walls and the energy element are both grey diffusive emitters and reflectors. The fluid is transparent to radiation. Computational model has been written using non-dimensional parameters and worked out by the finite difference technique. The effect of the angular velocity, volumetric heat generation frequency and surface emissivity has been studied and described in detail.

The results show that growth of the surface emissivity leads to a diminution of the mean heater temperature, while a weak rotation can improve the energy transport for low volumetric thermal generation frequency.

An efficient computational approach has been used to work out this problem. The originality of this work is to analyze complex (conductive–convective–radiative) energy transport in a rotating system with a local element of time-dependent volumetric heat generation. To the best of the authors’ knowledge, an interaction of major heat transfer mechanisms in a rotating system with a heat-generating element is scrutinized for the first time. The results would benefit scientists and engineers to become familiar with the analysis of complex heat transfer in rotating enclosures with internal heat-generating units, and the way to predict the heat transfer rate in advanced technical systems, in industrial sectors including transportation, power generation, chemical sectors and electronics.

This study aim to use the finite volume method to solve differential equations related to three-dimensional simulation of a solar collector. Modeling is done using ANSYS-fluent software program. The investigation is done for a photovoltaic (PV) solar cell, with the dimension of 394 × 84 mm², which is the aluminum type and receives the constant heat flux of 800 W.m⁻². Water is also used as the working fluid, and the Reynolds number is 500.

In the present study, the effect of fluid flow path on the thermal, electrical and fluid flow characteristics of a PV thermal (PVT) collector is investigated. Three alternatives for flow paths, namely, direct, curved and spiral for coolant flow, are considered, and a numerical model to simulate the system performance is developed.

The results show that the highest efficiency is achieved by the solar cell with a curved fluid flow path. Additionally, it is found that the curved path’s efficiency is 0.8% and 0.5% higher than that of direct and spiral paths, respectively. Moreover, the highest pressure drop occurs in the curved microchannel route, with around 260 kPa, which is 2% and 5% more than the pressure drop of spiral and direct.

To the best of the authors’ knowledge, there has been no study that investigates numerically heat transfer, fluid flow and electrical performance of a PV solar thermal cell, simultaneously. Moreover, the effect of the microchannel routes which are considered for water flow has not been considered by researchers so far. Taking all the mentioned points into account, in this study, numerical analysis on the effect of different microchannel paths on the performance of a PVT solar collector is carried. The investigation is conducted for the Reynolds number of 500.