Search results

Hydroxypropyl starch (HPS) is synthesized by using maize starch and different concentrations of both propylene oxide )PO) and sodium hydroxide (NaOH) with the intent to obtain HPS products which can better serve as a reducing and stabilizing agent during the preparation of silver nanoparticles. Such a preparation is carried out under a variety of conditions which include: pH, temperature, duration of the reaction medium, molar substitution (MS) of HPS, and concentration of both HPS and silver nitrate (AgNO3). The yield of silver nanoparticle colloids is monitored via color and ultraviolet (UV) visible spectral analyses whereas their evaluation is performed by making use of a transmission electron microscopy (TEM) to determine size and size distribution. The results obtained conclude that the optimum conditions for preparation of silver nanoparticle colloids with excellent size and size distribution which range from 6-8 nm could be produced by using 0.9 gm of HPS (MS = .84), 0.425 gm of AgNO3, a pH of 12, and temperature of 70°C for 15 minutes. Furthermore, the silver nanoparticle colloid solution prepared under these conditions is stable and remains without aggregation for more than six months. Thus preparation of a well stabilized silver nanoparticle solution with a concentration of 1608 ppm and a diameter of 9-18 nm can be achieved. A silver nanoparticle solution with these unique characteristics may be suitable for industrial applications.

Nano-sized silver particles at a concentration of 1620 ppm were prepared using hydroxypropyl starch (HPS) as a reductant of silver nitrate and a stabilizer for silver nanoparticles. A solution containing 1620 ppm silver nanoparticles was diluted to 50 ppm and 100 ppm. The diluted solution was applied to cotton fabrics in the presence and absence of a binder to impart antibacterial properties to the fabrics. The solution containing 50 ppm silver nanoparticles with 1% binder (Printofix® Binder MTB EG liquid) induces excellent and durable bactericidal activity in cotton fabrics. The finished fabrics were examined for morphological features and surface characteristics by making use of the SEM. The SEM pictures reveal that silver nanoparticles are deposited on the surface of fibrils (fabric fibres).

The purpose of this current investigation is to evaluate the effect of adding different levels of cheeseweed Malva parviflora L. mallow leaves powder (MPLP) on the nutritional and quality characteristics of bread.

Wheat flour was partially replaced with MPLP at 0%, 1%, 2%, 3%, 4% and 5% levels to obtain the wheat– MPLP composite flour. Chemical composition, phenolics, flavonoids and antioxidant activity by 2,2-diphenyl-1-picrylhydrazyl of wheat flour and MPLP were determined. Physicochemical and sensory characteristics of bread enriched with various levels of MPLP were evaluated.

MPLP contains 23.9% of protein, 10.1% of crude fiber and 9.8% of ash, respectively. MPLP had a significantly higher concentration of micronutrients than wheat flour. The content of total phenolics, flavonoids as well as free radical scavenging activity of MPLP were 17.6, 38.2 and 6.0 fold, respectively, higher compared to wheat flour. Protein content in bread samples increased with the addition of the MPLP in a range of 1.2%–6.6%. The increasing replacement of MPLP in the composite flours resulted in progressively higher dietary fiber and ash contents for fortified bread samples. The higher level of MPLP reduced the specific volume of fortified breads. The highest scores for the sensory attributes were noted for bread samples fortified with 2% and 3% of MPLP, whereas the lowest scores for bread samples fortified with 4% and 5% MPLP.

Supplementation of wheat bread with different levels of MPLP resulted in significant increases in macro and microelements of fortified breads.

Supplementation of wheat bread with different levels of cheeseweed Mallow (Malva parviflora L.) leaves powder resulted in significant increases in macro and microelements of fortified breads.

Sustainable textiles have become imperative in mitigating the adverse environmental and social impacts of the textile industry. This paper aims to synthesize recent advancements and key considerations in sustainable textile development, emphasizing their role in promoting environmental stewardship, social responsibility and economic viability.

The literature search has been conducted by identifying and articulating the previous studies related to integrating the latest cutting-edge techniques with functional textiles.

Future-generation textiles (FGTs), which incorporate state-of-the-art developments in materials, technologies and functionalities, herald a paradigm-shifting period in the textile industry. FGTs mark a new era in this dynamic world by igniting conversations about their mechanisms, problems, progress to date and potential future applications. This investigation covers a wide range of topics, including wearable electronics, nanotechnology, 3D printing, recycling, machine learning and energy harvesting. Key components include sustainability, functionality, intelligent integration, advanced manufacturing processes and multifunctionality. The paper highlights the potential benefits of smart textiles, wearable technology, improved performance and sustainability through advances in customization and security.

It is an original review work. This paper will be helpful for manufacturers and researchers in the smart wearable textile sector in developing innovative techniques for multifunctional garments by integrating cutting-edge technology.

A widespread focus on the plant-based antimicrobial cotton fabric finishes has been accomplished with notable importance in recent times. The antimicrobials prevent microbial dwelling in fabrics, which causes severe infections to the fabric users. Chemical disinfectants were conventionally used in fabrics to address this challenge; however, they were found to be toxic to humans. Thus, the present study aims to deal with the utilization of phytochemical extracts from different parts of Pongamia pinnata as antimicrobial coatings in cotton fabrics.

The root, bark and stem were collected and washed several times using tap water. Then, the leaves were dried at room temperature and the root and bark were dried using an oven at 40ºC. After drying, they were ground into fine powder and extracted with ethanol using the Soxhlet apparatus. After that the extract was coated on the fabric tested for antimicrobial studies.

The results reported that the leaf extract of P. pinnata-coated fabric exhibited enhanced antibacterial property towards gram-negative Escherichia coli bacteria, followed by root, bark and stem. The wash durability test in the extract-coated fabric samples revealed that dip-coating retained antibacterial activity until five washes. Thus, the current study clearly suggests that the leaf extract from P. pinnata is highly useful to develop antibacterial cotton fabrics as health-care textiles.

The novelty of the present work is to obtain the crude extract from the leaves, bark, root and stem of P. pinnata and evaluate their antibacterial activity against E. coli, upon being coated on cotton fibres. In addition, the extracts were subjected to wash durability analysis to study the coating efficiency of the phytochemicals in cotton fabrics and a probable mechanism for the antibacterial activity of P. pinnata extracts was also presented.

This study aims to prepare activated carbon (AC) and activated biochar (BC) from sugarcane bagasse (SCB) can be used as carbon black (CB) replacement for styrene butadiene rubber (SBR) composites cured by electron beam (EB) radiation.

This study is carried out to investigate the effect of partial replacement of CB (as traditional filler) by AC or BC prepared from low-cost agricultural wastes (SCB) to improve the properties of SBR rubber cured by EB radiation (doses from 25 to 150 kGy).

The results indicated that the addition of AC or BC leads to improve the physical and mechanical properties of SBR with increasing irradiation dose [especially at concentration of 10 parts per hundred part of rubber (phr) from BC]. Also in this study, this paper examines how exposure of SBR rubber composites to ultraviolet (UV) radiation changes the mechanical properties for these composites, to do that, the specimens were examined before and after they were exposed to UV radiation for 300 h. The results showed that, the irradiated SBR composites, UV exposure, exhibit better retention in mechanical properties as compared with unirradiated ones, and the samples loaded with CB hybrid with ACs had an increased value of tensile strength (TS) retention as compared with blank sample.

The importance of this study is that, the production of AC from SCB offers a huge opportunity to overcome the problem of the disposal of SCB.

This study aims to address a comprehensive and integrated investigations pertaining to the preparation of AgNPs with well-defined nano-sized scale using the aforementioned poly (meth acrylic acid [MAA])–chitosan graft copolymer, which is cheap, nontoxic, biodegradable and biocompatible agent as a substitute for the traditionally used toxic reducing agents.

AgNPs are prepared under a range of conditions, containing silver nitrate and poly (MAA)–chitosan graft copolymer concentrations, time, temperature and pH of the preparation medium. To classify AgNPs obtained under the various conditions, ultraviolet–visible spectroscopy spectra and transmission electron microscopy images are used for characterization of AgNPs instrumentally in addition to the visual color change throughout the work. The work was further extended to study the application of the so prepared AgNPs on cotton fabric to see their suitability as antibacterial agent as well as their durability after certain washing cycles.

According to the current investigation, the optimal conditions for AgNPs formation of nearly 3–15 nm in size are 5 g/l, poly (MAA)–chitosan graft copolymer and 300 ppm AgNO₃ in addition to carrying out the reaction at 60°C for 30 min at pH 12. Besides, the application of the so prepared AgNPs on cotton fabric displayed a substantial reduction in antibacterial efficiency against gram-positive and gram-negative bacteria estimated even after 10 washing cycles in comparison with untreated one.

To the best of the authors’ information, no comprehensive study of the synthesis of AgNPs using poly (MAA)–chitosan graft copolymer with a graft yield of 48% has been identified in the literature.

This paper aims to assess the moderating role of foreign direct investment (FDI) on the effect of economic complexity on carbon emissions, considering other drivers of carbon emissions such as renewable energy use and economic growth, using data set spanning between 1990 and 2018 in BRICS nations.

This research aims to fill the gap in ongoing literature. Cross-sectional IPS and cross-sectional augmented Dickey–Fuller tests, fully modified ordinary least square, dynamic ordinary least square, fixed effect ordinary least square, Westerlund cointegration and method of moments quantile regression (MMQR) econometric approaches are applied.

The Westerlund cointegration outcomes disclosed long-run interconnectedness between carbon emissions and its drivers. Furthermore, MMQR outcomes disclosed that in each tail (0.1–0.90), economic growth and economic complexity contribute to upsurge in carbon emissions while in each quantile (0.1–0.90) renewable energy abate carbon emissions. Furthermore, we affirmed the pollution-haven and environmental Kuznets curve hypotheses across all quantiles (0.1–0.90). Finally, at all quantiles (0.1–0.90), the joint effect of both FDI inflows and economic complexity reduced carbon emissions. Furthermore, the panel causality outcomes disclosed that all the exogenous variables can predict carbon emissions. Based on the findings, BRICS nation’s policymakers should place a greater emphasis on FDI inflows because it aids in abating environmental degradation.

To the best of the authors’ knowledge, this is the first research to test the moderating role of FDI on the effect of economic complexity on carbon emissions. Hence, this research aims to fill the gap in ongoing literature.

The textile sector is one of the sectors where competition is intense and requires the production of high-value-added products. This study aims to conduct patent analysis to find the technology status, recent trends, applications and technological evaluations of protective textile technologies in practice.

More than 36,840 patent documents related to protective textile technologies are available for researchers, patent examiners and patent researchers. Patent analysis is conducted to report the technology status, recent trends and applications of protective textile technologies. This analysis provides insights into the possible future directions of protective textile technologies in practice. Additionally, association rule mining (ARM) is performed to find the hidden patterns among protective textile technologies.

The development of protective textile technologies is revealed by the technology evaluation in this study. In addition, the sub-technology classes affecting protective textile technologies are examined using the cooperative patent classification (CPC) codes of the patent documents. Technology status and recent trends of protective textile technologies are provided in detail. The results of this study show that (1) protective textile technologies are constantly being developed, (2) the working areas of medical protective textiles are increasing, (3) there are frequent studies on fabric structures for saving lives within the framework of human needs and (4) there are four technology classes, namely A41D, Y10T, B32B and A62B impacting the other technology classes related to textile technologies such as D10B, Y10T, F41H, A62D, D04H, Y10S and D10B.

To have a competitive advantage in the marketplace, evaluation of textile technologies is critical in developing “functionalized” and “technologized” textile products. In particular, evaluating technologies in developing protective textile products is extremely important to meet customer demands and present competitive products in the market. Examining these patents for technology developers, decision-makers and policymakers is an urgent and necessary job. However, studies examining the development of protective textile technologies with patent analysis are very limited in the literature. To fill this gap, technology status, recent trends and applications of protective textile technologies are reported based on patent analysis and ARM in this study.

This paper aims to evaluate the antibacterial properties of pigment printed fabric loaded with nano-sized silver and zinc.

The pigment printing paste was mixed with nano-sized silver/zinc particles and applied to the cotton fabrics by the hand screen-printing technique. The nano-sized particles, distribution on the fabric surface, were analysed by scanning electron microscopy and energy-dispersive X-ray spectroscopy. The ASTM E2149-01 test method was used to determine the bacteriodynamic activity of the treated fabrics. The wash and light fastness properties of the treated fabrics were investigated.

The experimental results of the study showed that antibacterial properties could be obtained by loading with nano-size silver/zinc particles on pigment printed cotton fabrics. There is no negative or positive effect of the addition of nano silver/zinc particles to the printing paste on fastness properties.

The nano-sized metal particles and pigment printing paste should be well mixed to achieve uniform distribution on the printed surface.

The described process marks the introduction of a nano-technological aspect to pigment printing by its application to cotton fabrics.

The novelty/originality of the study lies in the new application process of nano-size silver/zinc particles to the textile pigment printing for antibacterial properties.