Search results

The purpose of this paper is to evaluate some common bread improvers (normally used for 100 per cent wheat bread) for their effect on the quality attributes of wheat-cassava (90:10) composite bread.

Four commonly used bread improvers (ASA, ABT, EDC and PTB) in Nigeria were evaluated for their effect on the baking potential of wheat-cassava (90:10) composite flour. Bread samples were baked from wheat-cassava (90:10) composite flour, with and without bread improvers. Changes in dough height during fermentation, oven spring, yield and specific volume of bread samples were determined. Bread samples were also evaluated for their sensory and staling characteristics.

Results showed that dough height during fermentation did not change significantly (p<0.05) and crumb colour, firmness, taste and aroma were unaffected by addition of bread improvers; but oven spring, yield, specific volume, bread shape, crust colour, texture and overall acceptability of bread were significantly different (p>0.05). All the bread improvers except ABT extended the shelf life of wheat-cassava (90:10) composite bread for a period of 24-48 hours.

Bread improvers normally used for 100 per cent wheat bread could be used effectively for wheat-cassava (90:10) composite bread without an adverse effect on quality of bread.

Bread makers need little or no additional training to handle wheat-cassava (90:10) composite flour for bread making process hence, Nigeria can sustain her policy of using wheat-cassava composite flour for baking without any serious technical problem.

This paper aims to review the chemical composition and industrial benefits of oil extracted from dikanut kernels.

Several literatures on chemical composition of dikanut kernels, methods of oil extraction from dikanut kernels and chemical composition of oil extracted from dikanut kernels were critically reviewed.

The review showed that proximate composition of dikanut kernels ranged from 2.10 to 11.90 per cent, 7.70 to 9.24 per cent, 51.32 to 70.80 per cent, 0.86 to 10.23 per cent, 2.26 to 6.80 per cent and 10.72 to 26.02 per cent for moisture, crude protein, crude fat, crude fibre, ash and carbohydrate contents, respectively. The methods of oil extraction from dikanut kernels include soxhlet extraction method, novel extraction method, enzymatic extraction method and pressing method. The quality attributes of dikanut kernel oil ranged from 1.59 to 4.70 g/100g, 0.50 to 2.67 meq/Kg, 4.30 to 13.40 g/100g, 187.90 to 256.50 mg KOH/g and 3.18 to 12.94 mg KOH/g for free fatty acid, peroxide value, iodine value, saponification value and acid value, respectively. Also, the percentage compositions of oleic, myristic, stearic, linolenic, palmitic, lauric, saturated fatty acids, monosaturated fatty acids and polyunsaturated fatty acids ranging from 0.00 to 6.90, 20.50 to 61.68, 0.80 to 11.40, 0.27 to 6.40, 5.06 to 10.30, 27.63 to 40.70, 97.45 to 98.73, 1.82 to 2.12 and 0.27 to 0.49 respectively. The results showed that dikanut kernels has appreciable amount of protein, carbohydrate and high level of fat content while oil extracted from dikanut kernels have high saponification value, high myristic acid and high lauric acid.

There are scanty information/published works on industrial products made from oil extracted from dikanut kernels.

The review helps in identifying different methods of extraction of oil from dikanut kernels apart from popular soxhlet extraction method (uses of organic solvent). Also, it helps to identify the domestic and industrial benefits of oil extracted from dikanut kernels.

The review showed that oil extracted from dikanut kernels could be useful as food additive, flavour ingredient, coating fresh citrus fruits and in the manufacture of margarine, oil creams, cooking oil, defoaming agent, cosmetics and pharmaceutical products.

This study aims to investigate the physicochemical and sensory characteristics of fried peanut cracker snacks coated with wheat (80%) and cassava (20%) composite flours.

The peanuts were sorted, boiled, drained, roasted, coated and fried at temperature of 150–180°C for 154.6–240 s. The fried peanut cracker-coated (FPCC) snacks produced were analyzed for proximate composition (moisture, crude fat, crude protein, crude fibre, total ash and carbohydrate contents), rancidity indices (peroxide value, free fatty acid and iodine value), physical properties, colour (lightness, redness and yellowness), texture (hardness, fracturability, adhesiveness and cohesiveness) and sensory qualities (taste, crispiness, colour, odour and overall acceptability).

There were significant differences in moisture (p = 0.000), crude fat (p = 0.001), crude protein (p = 0.000), crude fibre (p = 0.001), total ash (p = 0.00) and carbohydrate (p = 0.001). The range of values for moisture content, crude fat, crude protein, crude fibre, total ash and carbohydrate contents were 2.6%–4.9%, 27.1%–34.7%, 21.0%–26.3%, 3.1%–4.1%, 2.1%–2.5% and 33.9%–36.4%, respectively, while peroxide, free fatty acid and iodine values ranged from 1.2 to 2.0 mEq/kg, 32.8–47.0 mg KOH/g and 1.2–2.0 gI₂/100 g, respectively. The physical properties of the FPCCs showed decrease as the frying temperature and time increased. The values for lightness (L*), redness (a*) and yellowness (b*) ranged from 26.5 to 52.2, 11.4 to 22.0 and 37.0 to 42.5, while the texture attributes such as hardness (p = 0.001), fracturability (p = 0.023), adhesiveness (p = 0.001) and cohesiveness (p = 0.011) were significantly different and it ranged from 28.7 to 53.4 N, 28.6 to 48.3 N, 1.0 to 2.4 N/s and 0.0–0.1, respectively. The sensory score for wheat–cassava composite flours used for coating the snacks decreased as the frying temperature and time increased. The study shows that 20% of cassava flour incorporated into the formulation of coated snacks does not affect its overall acceptability.

There are scanty information/published works on physicochemical and sensory characteristics of fried peanut cracker coated with wheat–cassava composite flour.

This research work helps in producing fried peanut cracker coated with composite wheat–cassava flours.

The study shows that 20% of cassava flour incorporated into the formulation of coated snacks does not affect its overall acceptability.

The purpose of this paper is to evaluate the effects of substituting cow milk with soy milk in the standard milk chocolate recipe on the physical, chemical and sensory qualities of milk chocolate and obtain the best ratio of substitution.

Milk chocolates were produced by substituting the cow milk in the standard recipe with soy milk powder at different ratios of soy milk to cow milk. Physical and chemical analyses were carried out using the standard methods to evaluate the major raw materials and chocolate samples, and the sensory evaluation of the chocolate samples was carried out using preference and difference tests.

Soy milk contained the highest crude protein and crude fiber. The cut test results of the cocoa beans showed that the percentage of fully fermented cocoa beans was in agreement with the standard. Residimeter value (RV) of four chocolate samples (30:70, 20:80, 10:90, and 0:100) was the best. The nitrogen content and melting points of the chocolates samples were found to increase with increased inclusion of soy milk powder in the recipe. There was no significant difference (p<0.05) in taste, sweetness, smoothness, and overall acceptability of the 0:100 and 30:70; soy milk to cow milk samples.

Soy-chocolate will be a new chocolate product with higher melting point and lower cost than the standard milk chocolate. The selling price of chocolate will be lower and thus affordable to low-income earners. Also, there will be an increased utilization of soybean.

Soy-chocolate recipe is a new and additional recipe for the production of milk chocolate.

Based on the 5th wave/tomorrow age theory, we are living in the world that is in necessity to change. Rapid urbanization causes global challenges such as economic problems and recessions, environmental challenges, climate change, social instability, health diseases, biological attached, and crisis caused by technological dominations. These challenges threaten the world, humanity, and human beings. Therefore, it is vital to tackle and struggle with them in order to maintain the world and improve quality of livability and quality of life to achieve sustainability. Generally, modern Blue-Green urban areas and smart cities with high quality of livability and life are proposed to deal with urbanization challenges to maintain the world and improve quality of human life. Based on Prof. Doost's 5th wave theory, related theories, concepts and models like Doost Risk Mitigation Method (DRMM), and also his experience on sustainability as best practice such as cooperating with Danish Sustainable Platforms Company, working as an academic leader at IoE/EQ EU Erasmus Plus project in Germany during 2017–2020, cooperating with former mayor of Copenhagen, consulting the German MV State Minister of Energy, Digitalization, and Infrastructure to cooperate with Iran in 2016, more than 15 years holding lecture and research internationally about risk and risk management on mobility in different universities like (TU Berlin) Technical University of Berlin (EUREF Campus, Sustainable Mobility Management and Sustainability Building) and also achieving a honorary doctorate in sustainable development management, a practical model concerned on risk management in mobility to provide comprehensive global Blue-Green clean sustainable urban mobility risk mitigation strategic plan is given. Therefore, in this chapter, impact of risk management on mobility to provide sustainable global urban mobility plan in order to create modern Blue-Green sustainable urban area and future smart cities through the 5th wave theory are explored. Fundamentally, the main goal of the research is to have an applied study about mobility risk mitigation and utilize it as a key to create comprehensive global urban mobility risk mitigation plan toward Blue-Green sustainable clean mobility technologies to create modern sustainable smart cities through the tomorrow age theory in order to create livable urban area with high quality of livability and life. In addition, the risks in mobility through the DRMM are measured to analyze the risk and to do risk mitigation and mobility project improvement to move to sustainable mobility and high sustainability in future smart cities.

Throughout the world, there has been a dramatic increase in the demand for functional food products. Owing to the health benefits of barley, its utilization was explored for the development of β-glucan rich functional instant talbina (porridge). The present research was, therefore, undertaken with an aim to optimize the extrusion conditions for development of instant talbina premix and evaluate its functional and quality characteristics.

The independent variables i.e. barrel temperature (105–125°C) and feed moisture (12–20%) were studied to determine their influence on the system parameter i.e. specific mechanical energy and product characteristics i.e. bulk density, breaking strength, water absorption index, expansion ratio, water solubility index, L*, a* and b* by employing a central composite rotatable design.

All the quality parameters were significantly (p < 0.05) influenced by independent variables. The regression models obtained for all the responses showed higher coefficient of determination (R² = 0.99). The optimum extrusion conditions obtained by numerical optimization for development of extrudates used for making instant talbina were moisture content (12%) and barrel temperature (105°C). Various functional, pasting, complexing index and physicochemical properties of instant talbina were improved by the addition of honey and milk. The instant talbina prepared from barley flour with the addition of milk and honey showed increase in the β-glucan content, resistant starch, antioxidant activity and decrease in glycemic index with improved overall acceptability.

As far as we could possibly know that very limited or not many studies have been carried out wherein the possibility of developing instant talbina (porridge) have been carried out. As a result, the current study has a lot of potential for the food industry to manufacture β-glucan rich functional instant talbina with improved antioxidant characteristics and low glycemic index.

The aim of the study is to compare the effect of steaming method and time on the physico‐chemical properties of underutilized Dioscorea dumetorum with three more commonly consumed Dioscorea rotundata, Dioscorea cayenensis and Dioscorea alata.

Raw and pre‐gelatinized flour were produced from the yam species. Pre‐gelatinization was done by steaming diced cubes in autoclave at 68,950 Nm‐2 for 5 min and in Barlett steamer at 98±2°C for 10, 20 and 30 min. Flour samples were analyzed for amylose content, swelling index, consistency, solubility, water absorption capacity, and iodine affinity for starch.

The physico‐chemical properties of the flours were affected by both species and steaming time. Pre‐gelatinization of the tuber reduced amylose content in all the yam species, which reduced further with increase in steaming time. Except for amylose content and iodine affinity for starch, D. dumetorum compared with D. rotundata and D. cayenensis in the parameters that were measured. Samples autoclaved for 5 min had value similar to those steamed in Barlett steamer for 10 and 20 min for all the parameters that were measured, except consistency.

It is very important to encourage the cultivation and utilization of D. dumetorum because of the high yield and nutritional composition to enhance the nutritional and financial well‐being of the populace.

Pre‐gelatinization is important as pre‐treatment for yam tubers. Underutilized D. dumetorum could be useful in ingredient formulation for product development, especially as a thickening agent.

Reports a study to determine the suitability of beniseed for bread making as well as the chemical composition and acceptability of the bread among Nigerian bread consuming population. Three bread samples were developed from wheat, beniseed, and cassava composite flour using the formulae 85:10:5, 80:15:5 and 75:25:5. Baking characteristics, chemical composition and acceptability tests were carried out on the samples with wheat bread serving as control. Results show that bread produced from beniseed composite flour has similar baking characteristics in terms of appearance, colour and flavour when compared with wheat bread. Consumer acceptability tests indicated that the bread samples were all acceptable, with the sample with formula 85:10:5 ranked first and being the most preferred. Analysis of chemical composition indicated that the bread samples contain higher protein, fat, crude fibre and ash. This study has shown that acceptable bread of higher nutritional value can be produced from beniseed.

The extended unified theory of acceptance and use of technology (UTAUT2) model has been adapted and applied by scholars to gain insight into mobile banking (m-banking) usage. By combining three perspectives, UTAUT2, gamification (GM) and generational cohort theory, this study aims to investigate the factors which impact m-banking usage and examine the moderating effect of generations Y and Z on the relationship between GM and intention to use m-banking.

The adopted model was tested in a quantitative study by using partial least square structural equation modelling. A total of 380 valid questionnaires from a transition country, Albania, have been examined.

In the study, scientific evidence concerning the UTAUT2 model and GM elements are provided. Thus, facilitation conditions, habit and hedonic motivation were found to be significant determinants of GM. Moreover, the results revealed that age moderates the relationship between GM and behavioural intention (BI). Compared to generation Z, individuals born prior to 1996 (generation Y), exhibited a much stronger relationship.

Although Albania bears similarities with other transition countries in terms of regional, economic and political environments, the generalisation of these results to another context is rather limited.

This paper offers a model integrating UTAUT2, GM and generational cohorts in the context of a transition country. The findings can be applied in the form of guidelines for a number of financial institutions.

Besides identifying the determinants of m-banking adoption and GM, this study notably reveals the importance of generational cohorts because it governs the effect of GM on m-banking BI.

Although milk is considered a vital source of nutrition for the livelihood, as the beginning of civilization, its antioxidant potential is required to be improved. This paper aims to increase antioxidant activities in milk and soy milk (Glycine max L.) has been found as a good compatible source. Hence, the present work was planned to investigate the impact of blending of different proportions of soy milk with standardized milk (i.e. 50 per cent soy milk with 50 per cent standardized milk, 60 per cent soy milk with 40 per cent standardized milk, 70 per cent soy milk with 30 per cent standardized milk and 100 per cent standardized milk as control sample) on antioxidant properties and sensory attributes of the blends.

Antioxidant properties of the blends were determined in terms of 2,2-diphenyl-1-picrylhydrazyl, ferric reducing antioxidant power and total phenol content. Sensory evaluation was carried out using a nine-point hedonic scale based on four selected quality attributes (i.e. smell, taste, color and appearance and mouthfeel) and ranked for their quality traits by fuzzy modeling.

A blend containing 70 per cent soy milk with 30 per cent standardized milk showed the highest antioxidant activities as compared to control milk sample (p < 0.05). Blend of 50 per cent soy milk with 50 per cent standardized milk was found most acceptable on the basis of sensory analysis and its antioxidant activities were also appreciable as compared to control milk sample (p < 0.05). Smell, taste, color and appearance and mouthfeel influenced the acceptability of formulated milk samples in decreasing order of significance (p < 0.05).

The present attempt has been made to formulate liquid milk by mixing standardized milk and soy milk, in which enhancement in the antioxidant activities of standardized milk and masking of off-flavor of soy milk is done. It is not done before and it may improve the nutritional and commercial value of the milk. Further, fuzzy modeling used for choosing appropriate blend in terms of sensory scores is also found as a novel approach.