Mohamed A. Antar and Maged A.I. El‐Shaarawi
The purpose of this paper is to investigate the problem of entropy generation around a spinning/non‐spinning solid sphere subjected to uniform heat flux boundary condition in the…
Abstract
Purpose
The purpose of this paper is to investigate the problem of entropy generation around a spinning/non‐spinning solid sphere subjected to uniform heat flux boundary condition in the forced‐convection regime.
Design/methodology/approach
The governing continuity, momentum, energy and entropy generation equations are numerically solved for a wide range of the controlling parameters; Reynolds number and the dimensionless spin number.
Findings
The dimensionless overall total entropy generation increases with the dimensionless spin number. The effect of increasing the spin number on the fluid‐friction component of entropy generation is more significant compared to its effect on heat transfer entropy generation.
Research limitations/implications
Since the boundary‐layer analysis is used, the flow is presented up to only the point of external flow separation.
Practical implications
Entropy generation analysis can be used to evaluate the design of many heat transfer systems and suggest design improvements.
Originality/value
A review in the open literature indicated that no study is available for the entropy generation in the unconfined flow case about a spinning sphere.
Details
Keywords
M.A. Antar, Rached Ben-Mansour and Salem Ahmed Al-Dini
There are industrial applications for varying speed lid-driven flow and heat transfer such as the float glass process where the glass film stretches or thickens depending on the…
Abstract
Purpose
There are industrial applications for varying speed lid-driven flow and heat transfer such as the float glass process where the glass film stretches or thickens depending on the desired thickness. Hence the tin cavity underneath or the nitrogen cavity above is being driven by a variable speed. The purpose of this paper is to simulate such behavior.
Design/methodology/approach
Numerical solution of variable speed lid-driven cavity is carried out with thermal radiation being considered using control volume approach and staggered grid and applying the SIMPLE algorithm. Transient simulation is used for 2D model in the present study. Second order upwind schemes were used for discretization of momentum, energy equations and time.
Findings
Under laminar conditions, thermal radiation plays a significant role in the heat transfer characteristics of the lid-driven cavity. This effect is more significant for blackbody radiation and decreases as the surface emissivity decreases. Nusselt number (Nu) behavior lies between these two limiting case profiles considering constant speed profiles of both maximum and minimum lid velocities, respectively. In addition, local Nu values at the tip where higher than those at the top of the cavity that is stagnant.
Research limitations/implications
The study is limited to laminar flow case.
Practical implications
The applications of this study can be found in float glass process where the glass film stretches or thickens depending on the desired thickness. Hence the tin cavity underneath or the nitrogen cavity above is being driven by a variable speed. Another application involves casting of plastic films. The molten polymer leaves the die with a considerable thickness and high temperature. The film is then trenched to reach its final thickness. In this case, usually there is no actual cavity above or below the film but one can approximate the problem as such. Other similar applications do exist in food drying and processing where the conveyer belt is in portions and their speed may not be the same in different section of the processing oven.
Originality/value
To the best of the authors knowledge, no study in the literature addressed the effect of thermal radiation in lid-driven cavities with variable speed
Details
Keywords
M.A. Antar and M.A.I. El‐Shaarawi
Boundary‐layer flow around a spinning liquid sphere moving steadily in a gas stream is investigated numerically. The shear stress exerted on the sphere's surface results in…
Abstract
Boundary‐layer flow around a spinning liquid sphere moving steadily in a gas stream is investigated numerically. The shear stress exerted on the sphere's surface results in surface rotation in the meridional direction in addition to the azimuthal velocity resulting from the spinning of the liquid sphere. The parameters controlling the flow around the sphere are the external flow Reynolds number (Re), the liquid‐to‐gas viscosity ratio (μ*) and the spinning parameter (Rer/Re)2. The effect of these parameters on the velocity components (namely the meridional, radial and azimuthal velocity components) and on the shear stress is shown. Moreover, their effect on the location of external flow point of separation is also demonstrated.
Details
Keywords
The purpose of this paper is to address various works on mixed convection and proposes 10 unified models (Models 1–10) based on various thermal and kinematic conditions of the…
Abstract
Purpose
The purpose of this paper is to address various works on mixed convection and proposes 10 unified models (Models 1–10) based on various thermal and kinematic conditions of the boundary walls, thermal conditions and/ or kinematics of objects embedded in the cavities and kinematics of external flow field through the ventilation ports. Experimental works on mixed convection have also been addressed.
Design/methodology/approach
This review is based on 10 unified models on mixed convection within cavities. Models 1–5 involve mixed convection based on the movement of single or double walls subjected to various temperature boundary conditions. Model 6 elucidates mixed convection due to the movement of single or double walls of cavities containing discrete heaters at the stationary wall(s). Model 7A focuses mixed convection based on the movement of wall(s) for cavities containing stationary solid obstacles (hot or cold or adiabatic) whereas Model 7B elucidates mixed convection based on the rotation of solid cylinders (hot or conductive or adiabatic) within the cavities enclosed by stationary or moving wall(s). Model 8 is based on mixed convection due to the flow of air through ventilation ports of cavities (with or without adiabatic baffles) subjected to hot and adiabatic walls. Models 9 and 10 elucidate mixed convection due to flow of air through ventilation ports of cavities involving discrete heaters and/or solid obstacles (conductive or hot) at various locations within cavities.
Findings
Mixed convection plays an important role for various processes based on convection pattern and heat transfer rate. An important dimensionless number, Richardson number (Ri) identifies various convection regimes (forced, mixed and natural convection). Generalized models also depict the role of “aiding” and “opposing” flow and combination of both on mixed convection processes. Aiding flow (interaction of buoyancy and inertial forces in the same direction) may result in the augmentation of the heat transfer rate whereas opposing flow (interaction of buoyancy and inertial forces in the opposite directions) may result in decrease of the heat transfer rate. Works involving fluid media, porous media and nanofluids (with magnetohydrodynamics) have been highlighted. Various numerical and experimental works on mixed convection have been elucidated. Flow and thermal maps associated with the heat transfer rate for a few representative cases of unified models [Models 1–10] have been elucidated involving specific dimensionless numbers.
Originality/value
This review paper will provide guidelines for optimal design/operation involving mixed convection processing applications.
Details
Keywords
Ammar Mushtaq, M. Mustafa, T. Hayat and A. Alsaedi
– The purpose of this paper is to consider a laminar two-dimensional incompressible flow of an electrically conducting fluid over a moving flat plate with a parallel free stream.
Abstract
Purpose
The purpose of this paper is to consider a laminar two-dimensional incompressible flow of an electrically conducting fluid over a moving flat plate with a parallel free stream.
Design/methodology/approach
The governing equations are first reduced into self-similar forms and then solved for the numerical solutions by shooting method.
Findings
The results are compared with the available studies is some special cases and found in excellent agreement. It is noticed that an increase in the magnetic field strength leads to a decrease in the momentum boundary layer thickness and enhancement in the rate of heat transfer from the plate. It is also observed that temperature and heat transfer from the plate increase when radiation effect is strengthened.
Originality/value
A recently proposed idea of nonlinear radiative heat transfer with Joule heating and viscous dissipation effects is analyzed.
Details
Keywords
Sen-Yung Lee, Li-Kuo Chou and Chao Kuang Chen
The purpose of this paper is to propose the Laplace Adomian Decomposition Method (LADM) for studying the nonlinear temperature and thermal stress analysis of annular fins with…
Abstract
Purpose
The purpose of this paper is to propose the Laplace Adomian Decomposition Method (LADM) for studying the nonlinear temperature and thermal stress analysis of annular fins with time-dependent boundary condition.
Design/methodology/approach
The nonlinear behavior of temperature and thermal stress distribution in an annular fin with rectangular profile subjected to time-dependent periodic temperature variations at the root is studied by the LADM. The radiation effect is considered. The convective heat transfer coefficient is considered as a temperature function.
Findings
The proposed solution method is helpful in overcoming the computational bottleneck commonly encountered in industry and in academia. The results show that the circumferential stress at the root of the fin will be important in the fatigue analysis.
Originality/value
This study presents an effective solution method to analyze the nonlinear behavior of temperature and thermal stress distribution in an annular fin with rectangular profile subjected to time-dependent periodic temperature variations at the root by using LADM.
Details
Keywords
This study aims to numerically simulate the flow induced by a radially expanding/contracting and rotating sphere with suction. In the absence of rotation, one-dimensional flow…
Abstract
Purpose
This study aims to numerically simulate the flow induced by a radially expanding/contracting and rotating sphere with suction. In the absence of rotation, one-dimensional flow motion occurs as expected. Otherwise, centrifugal force slows down the induced flow motion, in addition to the radial movement of the surface.
Design/methodology/approach
The present work is devoted to the analysis of a rotating permeable sphere. The sphere, because it is elastic, is allowed to expand or contract uniformly in the radial direction while rotating.
Findings
Numerical simulations of the governing equation in spherical coordinates are supported by a perturbation approach. It is found that the equatorial region is effectively smoothen out by the wall suction in non-expanding, expanding and contracting wall deformation cases. The radial inward flow in the vicinity of the equator is no longer valid in the case of sphere expansion, and strong suction causes nearly constant radial suction velocities. More fluid is sucked radially inward near the pole region when wall contraction is active.
Originality/value
The problem is set up for the first time in the literature. It is determined physically, the wall expansion mechanism requires more torque with less drag.
Details
Keywords
Guo Huafeng, Xiang Changcheng and Chen Shiqiang
This study aims to reduce data bias during human activity and increase the accuracy of activity recognition.
Abstract
Purpose
This study aims to reduce data bias during human activity and increase the accuracy of activity recognition.
Design/methodology/approach
A convolutional neural network and a bidirectional long short-term memory model are used to automatically capture feature information of time series from raw sensor data and use a self-attention mechanism to learn select potential relationships of essential time points. The proposed model has been evaluated on six publicly available data sets and verified that the performance is significantly improved by combining the self-attentive mechanism with deep convolutional networks and recursive layers.
Findings
The proposed method significantly improves accuracy over the state-of-the-art method between different data sets, demonstrating the superiority of the proposed method in intelligent sensor systems.
Originality/value
Using deep learning frameworks, especially activity recognition using self-attention mechanisms, greatly improves recognition accuracy.
Details
Keywords
Guanchen Liu, Dongdong Xu, Zifu Shen, Hongjie Xu and Liang Ding
As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous…
Abstract
Purpose
As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.
Design/methodology/approach
Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.
Findings
In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.
Originality/value
With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.
Details
Keywords
Abdul Wahab Hashmi, Harlal Singh Mali and Anoj Meena
The purpose of this paper is to study the functionality of additively manufactured (AM) parts, mainly depending on their dimensional accuracy and surface finish. However, the…
Abstract
Purpose
The purpose of this paper is to study the functionality of additively manufactured (AM) parts, mainly depending on their dimensional accuracy and surface finish. However, the products manufactured using AM usually suffer from defects like roughness or uneven surfaces. This paper discusses the various surface quality improvement techniques, including how to reduce surface defects, surface roughness and dimensional accuracy of AM parts.
Design/methodology/approach
There are many different types of popular AM methods. Unfortunately, these AM methods are susceptible to different kinds of surface defects in the product. As a result, pre- and postprocessing efforts and control of various AM process parameters are needed to improve the surface quality and reduce surface roughness.
Findings
In this paper, the various surface quality improvement methods are categorized based on the type of materials, working principles of AM and types of finishing processes. They have been divided into chemical, thermal, mechanical and hybrid-based categories.
Research limitations/implications
The review has evaluated the possibility of various surface finishing methods for enhancing the surface quality of AM parts. It has also discussed the research perspective of these methods for surface finishing of AM parts at micro- to nanolevel surface roughness and better dimensional accuracy.
Originality/value
This paper represents a comprehensive review of surface quality improvement methods for both metals and polymer-based AM parts.