Search results

Concrete is a building material widely used for the infrastructural development. Cement is the binding material used for the development of concrete. It is the primary cause of CO₂ emission globally. The purpose of this study is to develop sustainable concrete material to satisfy the present need of construction sector. Geopolymer concrete (GPC) is a sustainable concrete developed without the use of cement. Therefore, investigations are being conducted to replace the cement by 100% with high calcium fly ash (FA) as binding material.

High calcium FA is used as cementitious binder, sodium hydroxide (NaOH) and sodium silicates (Na₂SiO₃) are used as alkaline liquids for developing the GPC. Mix proportions with different NaOH molarities of 4, 6, 8 and 10 M are considered to attain the appropriate mix. The method of curing adopted is ambient and oven curing. Workability, compressive strength and microstructure characteristics of GPC are analysed and presented.

An increase of NaOH in the mix decreases the workability. Compressive strength of 29 MPa is obtained for Mix-I with 8 M under ambient curing. A polynomial relationship is obtained to predict the compressive strength of GPC. Scanning electron microscope analysis is used to confirm the geo-polymerisation process in the microstructure of concrete.

This research work focuses on finding some alternative cementitious material for concrete that can replace ordinary portland cement (OPC) to overcome the CO₂ emission owing to the utilisation of cement in the construction industry. An attempt has been made to use the waste material (high calcium FA) from thermal power plant for the production of GPC. GPC concrete is the novel building material and alternative to conventional concrete. It is the ecofriendly product contributing towards the improvement of the circular economy in the construction industry. There are several factors that affect the property of GPC such as type of binder material, molarity of activator solution and curing condition. The novelty of this work lies in the approach of using locally available high calcium FA along with manufactured sand for the development of GPC. As this approach is rarely investigated, to prove the attainment of compressive strength of GPC with high calcium FA, an attempt has been made during the present investigation. Other influencing parameter which affects the strength gain has also been analysed in this paper.

This chapter presents a discussion and an analysis of the literature on nationalization of international business. National governments have justified the expropriation and nationalization of the operations of foreign multinational in their jurisdiction based on the social responsibilities as welfare providers, and safeguarding the short- and long-term interest of their citizens.

There are multiple studies that show the processes and impacts of nationalizations and privatizations (also called denationalizations) worldwide. This chapter analyses specific cases to the light of existing international business literature and proposes prepositions for future studies.

This chapter presents an analysis where theories of internationalization could be used to analyze specific advantages of States and domestic investors when assuming ownership of operations of international business in their national territory.

The context, processes, and consequences of nationalization of foreign firms historically, economically, and politically have generally a correlation either with political changes, and macroeconomic scenarios related to scarcity and uncertainty in the international market of extractive industries, or with nationalistic political views in national governments.

This paper presents the results of a survey of Canadian robot users concerning robot reliability and safety. Data on 26 questions were analyzed and the resulting findings are presented in the form of tables, histograms, pie charts, etc. Provides conclusions including the fact that approximately 75 per cent of companies are using robots for commercial purposes; most general types of robots used in industry are intelligent robots; frequently ineffective maintenance manuals are provided by the robot manufacturers; and robot‐related problems are generally less than 50 per year.

This study aims to characterize the behavior of blended concrete, including metakaolin (MK) and quarry dust (QD), as supplementary cementing materials. The study focuses on evaluating the effects of these materials on the fresh and hardened properties of concrete.

MK, a pozzolanic material, and QD, a fine aggregate by-product, are potentially sustainable alternatives for enhancing concrete performance and reducing environmental impact. The addition of different percentages of MK enhances the pozzolanic reaction, resulting in improved strength development. Furthermore, the optimum dosage of MK, mixed with QD, and mechanical properties like compressive, flexural and split tensile strength of concrete were evaluated to investigate the synergetic effect of MK and quarry dust for M20-grade concrete.

The results reveal the influence of metakaolin and QD on the overall performance of blended concrete. Cost analysis showed that the optimum mix can reduce the 7%–8% overall cost of the materials for M20-grade concrete. Energy analysis showed that the optimum mix can reduce 7%–8% energy consumption.

The effective utilization is determined with the help of the analytical hierarchy process method to find an optimal solution among the selected criteria. According to the AHP analysis, the optimum content of MK and quarry dust is 12% and 16%, respectively, performing best among all other trial mixes.

The crane plays an essential role in modern construction sites as it supports numerous operations and activities on-site. Additionally, the crane produces a big amount of data that, if analyzed, could significantly affect productivity, progress monitoring and decision-making in construction projects. This paper aims to show the usability of crane data in tracking the progress of activities on-site.

This paper presents a pattern-based recognition method to detect concrete pouring activities on any concrete-based construction sites. A case study is presented to assess the methodology with a real-life example.

The analysis of the data helped build a theoretical pattern for concrete pouring activities and detect the different phases and progress of these activities. Accordingly, the data become useable to track progress and identify problems in concrete pouring activities.

The paper presents an example for construction practitioners and researcher about a practical and easy way to analyze the big data that comes from cranes and how it is used in tracking projects' progress. The current study focuses only on concrete pouring activities; future studies can include other types of activities and can utilize the data with other building methods to improve construction productivity.

The proposed approach is supposed to be simultaneously efficient in terms of concrete pouring detection as well as cost-effective. Construction practitioners could track concrete activities using an already-embedded monitoring device.

While several studies in the literature targeted the optimization of crane operations and of mitigating hazards through automation and sensing, the opportunity of using cranes as progress trackers is yet to be fully exploited.

This paper presents a review of published literature on robot reliability and safety. The literature is classified into three main categories: robot safety; robot reliability; and miscellaneous. Robot safety is further categorized into six classifications: general; accidents; human‐factors; safety standards; safety methods; and safety systems/technologies. The period covered by the review is from 1973 to 2001.

Regardless of where the business stood at the beginning of 2020, COVID-19 afflicted the corporate world as well as most of the workforce worked remotely due to government-mandated isolation. The range of personal and professional problems experienced due to remote working by employees was explored at one of the Non-Financial Banking companies and how the company responded to their well-being by interviewing 124 employees and a senior HR personnel. Remote work induced by COVID-19 was not a cakewalk as 56.5% of employees desired physical connectivity with colleagues, for 50.8% work done from home was not interesting and more than 50% of the respondents agreed to work more hours than usual. The outcome was anxiety for some of them. The imbalance between personal and professional life was dissipated with the support of the management as 94.4% of them got sufficient support from their respective managers and colleagues, as they were able to communicate and collaborate with them. The managerial side validated the responses in a way that a flexible and target-oriented approach was adopted for employees. They organized stress management activities and ensured connections through regular employee connect and communication by Learning and Development department. Additionally, COVID-19 advisories and guidelines were followed while engaging with employees. The work–life balance shaken due to remote work was managed with responsive humanistic management practices that had the enduring effect of garnering employee engagement levels with the organization.

Eighty‐five participants attended the 4th ISHM Display meeting at the Jaarbeurs Congress Centre in Utrecht on 16 October, 1986. The programme of the day started with the annual general membership meeting of the Benelux Chapter. The chairman, Mr T. Kwikkers, gave a short review of the state of affairs of ISHM‐Benelux and of the activities of the last year. He mentioned the temporary enlargement of the executive committee to give a new generation a chance to gain experience in the ISHM organisation and to take up some new activities. In order to raise publicity for ISHM and Hybrid Circuits a new brochure has been designed and a set of material for demonstration purposes was collected. With the material every member of the chapter can easily set up a presentation for schools or customers. This year ISHM‐Benelux has grown from 85 to 100 members and enjoys a healthy financial situation. Next year again emphasis will be put on public relations. Professor R. Govaerts signified that he was no longer available for a position in the executive committee. As Prof. Govaerts has been very active and stimulating for the ISHM‐Benelux Chapter from its foundation in 1976 up to now, the general membership meeting decided to appoint him as (the first) honorary member of this chapter. Except for Professor Govaerts, the sitting executive committee, consisting of 15 members, was re‐elected for another year. After the European conferences in Bournemouth and Hamburg the ISHM‐Benelux chapter is asked to organise the 1991 Conference. The executive committee is already looking out for candidates for a function in the organising committee, which must be formed in the coming year.

These implementations not only generate excessive voltage levels to enhance the quality of power but also include a detailed investigating of the various modulation methods and control schemes for multilevel inverter (MLI) topologies. Reduced harmonic modulation technology is used to produce 11-level output voltage with the production of renewable energy applications. The simulation is done in the MATLAB/Simulink for 11-level symmetric MLI and is correlated with the conventional inverter design.

This paper is focused on investigating the different types of asymmetric, symmetric and hybrid topologies and control methods used for the modular multilevel inverter (MMI) operation. Classical MLI configurations are affected by performance issues such as poor power quality, uneconomic structure and low efficiency.

The variations in both carrier and reference signals and their performance are analyzed for the proposed inverter topologies. The simulation result compares unipolar and bipolar pulse-width modulation (PWM) techniques with total harmonic distortion (THD) results. The solar-fed 11-level MMI is controlled using various modulation strategies, which are connected to marine emergency lighting loads. Various modulation techniques are used to control the solar-fed 11-level MMI, which is connected to marine emergency lighting loads. The entire hardware system is controlled by using SPARTAN 3A field programmable gate array (FPGA) board and the least harmonics are obtained by improving the power quality.

The simulation result compares unipolar and bipolar PWM techniques with THD results. Various modulation techniques are used to control the solar-fed 11-level MMI, which is connected to marine emergency lighting loads. The entire hardware system is controlled by a SPARTAN 3A field programmable gate array (FPGA) board, and the power quality is improved to achieve the lowest harmonics possible.

The aim of this study was to determine the effect of anxiety levels of adults on their nutritional status during the COVID-19 pandemic in Kayseri province, Turkey.

A total of 898 adults consisting of 479 individuals with and 419 individuals without a positive diagnosis of COVID-19 were included in the study. The individuals’ socio-demographic characteristics, health status, nutritional habits, anthropometric measurement and Fear of COVID-19 Scale (FCV-19S) information were obtained online.

The mean FCV-19S score of the participants was 17.49 ± 6.02. FCV-19S score was higher in those who reduced their consumption of protein sources compared to those who did not change and those who increased (p < 0.001). It was determined that FCV-19S scores of participants who increased their consumption of fruit/vegetables, sweets and sugar were higher than those who did not change their consumption of such items (p = 0.007). The FCV-19S scores of individuals who did not change their onion/garlic and snack consumption were lower than those who decreased or increased the consumption of these nutrients (p = 0.001, p = 0.002).

Education programs can be organized especially targeting vulnerable populations, such as women, individuals with chronic diseases and those experiencing COVID-19 symptoms. These programs can be conducted by dietitians and psychologists in collaboration, focusing on promoting healthy eating habits and coping strategies during stressful times.

It was determined that those who changed their nutrition habits during the COVID-19 pandemic had higher fear levels than those who did not. Individuals with high fear paid more attention to healthy nutrition than individuals without fear.