Search results

This article has been withdrawn as it was published elsewhere and accidentally duplicated. The original article can be seen here: 10.1108/00368790510614163. When citing the article, please cite: B.S. Yilbas, M. Sunar, Z. Qasem, B.J. Abdul Aleem, S. Zainaulabdeen, (2005), “Study into mechanical properties of TiN coating on Ti-6Al-4V alloy through three-point bending tests”, Industrial Lubrication and Tribology, Vol. 57 Iss: 5, pp. 193 - 196.

This paper aims to investigate the effect of physical vapor deposition (PVD)-coated stencil wall aperture on the life span of fine-pitch stencil printing.

The fine-pitch stencil used in this work is fabricated by electroform process and subsequently nano-coated using the PVD process. Stencil printing process was then performed to print the solder paste onto the printed circuit board (PCB) pad. The solder paste release was observed by solder paste inspection (SPI) and analyzed qualitatively and quantitatively. The printing cycle of up to 80,000 cycles was used to investigate the life span of stencil printing.

The finding shows that the performance of stencil printing in terms of solder printing quality is highly dependent on the surface roughness of the stencil aperture. PVD-coated stencil aperture can prolong the life span of stencil printing with an acceptable performance rate of about 60%.

Stencil printing is one of the important processes in surface mount technology to apply solder paste on the PCB. The stencil’s life span greatly depends on the type of solder paste, stencil printing cycles involved and stencil conditions such as the shape of the aperture, size and thickness of the stencil. This study will provide valuable insight into the relationship between the coated stencil wall aperture via PVD process on the life span of fine-pitch stencil printing.

More and more diversity is present in our classrooms. As teachers, we must be able to respond to the different levels of learning presented by our students. Therefore, it is necessary to use the new emerging technologies as elements of response. Thus, the purpose of this paper is to develop a systematic and thematic review of the application of augmented reality (AR) in the learning of autistic students in the educational setting during the period 1996–2020 using the Web of Science and Scopus databases.

For this purpose, one of the bibliometric techniques called systematic and thematic review has been used. This technique is supported by the preferred reporting items for systematic reviews methodology, and it uses a quantitative and qualitative approach. The thematic analysis will be carried out on 28 documents based on a series of indicators, including sample size, hardware devices, way of storing the information and findings obtained in the research.

The results of the work indicate that the average size of the sample is three participants, and that the most worked area has been social skills using tablets. In addition, bookmarks are often used as an element of information storage in AR.

The main contribution of this work focuses on the establishment of a series of thematic variables that will serve for the later development of an action protocol for the creation of AR activities for autistic students.

This study aims to propose a new simulation approach for a real-life large and complex crowd management which takes into account deep learning algorithm. Moreover, the proposed model also determines the crowd level and also sends an alarm to avoid the crowd from exceeding its limit. Also, the model estimates crowd density in the pictures through which the study evaluates the deep learning algorithm approach to address the problem of crowd congestion. Furthermore, the suggested model comprises of two main components. The first takes the images of the moving crowd and classifies them into five categories such as “heavily crowded, crowded, semi-crowded, light crowded and normal,” whereas the second one comprises of colour warnings (five). The colour of these lights depends upon the results of the process of classification. The paper is structured as follows. Section 2 describes the theoretical background; Section 3 suggests the proposed approach followed by convolutional neural network (CNN) algorithm in Section 4. Sections 5 and 6 explain the data set and parameters as well as modelling network. Experiment, results and simulation evaluation are explained in Sections 7 and 8. Finally, this paper ends with conclusion which is Section 9 of this paper.

This paper addresses the issue of large-scale crowd management by exploiting the techniques and algorithms of simulation and deep learning. It focuses on a real-life case study of Hajj pilgrimage in Saudi Arabia that exhibits intricate pattern of crowd management. Hajj pilgrimage includes performing Umrah along with hajj that involves several steps which is a sacred prayer of Muslims performed at different time span of the year. Muslims from all over the world visit the holy city of Mecca to perform Tawaf that is one of the stages included in the performance of Hajj or Umrah, it is an obligatory step in prayer. Accordingly, all pilgrims require visiting Mataf to perform Tawaf. It is essential to control the crowd performing Tawaf systematically in a constrained place to avoid any mishap. This study proposed a model for crowd management system by using image classification and a system of alarm to manage millions of people during Hajj. This proposed system highly depends on the adequate data set used to train CNN which is a deep learning technique and has recently drawn the attention of the research community as well as the industry in changing applications of image classification and the recognition of speed. The purpose is to train the model with mapped image data, making it available to be used in classifying the crowd into five categories like crowded, heavily crowded, semi-crowded, normal and light-crowded. The results produce adequate signals as they prove to be helpful in terms of monitoring the pilgrims which shows its usefulness.

After the first attempt of adding the first convolutional layer with 32 filters, the accuracy is not good and stands out at about 55%. Therefore, the algorithm is further improved by adding the second layer with 64 filters. This attempt is a success as it gives more improved results with an accuracy of 97%. After using the dropout fraction as a 0.5 to prevent overfitting, the test and training accuracy of 98% is achieved which is acceptable training and testing accuracy.

This study has proposed a model to solve the problem related to estimation of the level of congestion to avoid any accidents from happening because of it. This can be applied to the monitoring schemes that are used during Hajj, especially in crowd management during Tawaf. The model works as such that it activates an alarm when the default crowd limit exceeds. In this way, chances of the crowd reaching a dangerous level are reduced which minimizes the potential accidents that might take place. The model has a traffic light system, the appearance of red light means that the number of pilgrims in a particular area has exceeded its default limit and then it alerts to stop the migration of people to that particular area. The yellow light indicates that the number of pilgrims entering and leaving a particular area has equalized, then the pilgrims are suggested to slower their pace. Finally, the green light shows that the level of the crowd in a particular area is low and that the pilgrims can move freely in that area. The proposed model is simple and user friendly as it uses the most common traffic light system which makes it easier for the pilgrims to understand and follow accordingly.

This paper aims to present harmonic response of magneto‐electro‐elastic cylinder by quasi‐static and fully dynamic electromagnetic theories. The quasi‐static assumption uses magnetic scalar potential whereas magnetic vector potential is employed in a fully dynamic model.

The electric field induced by time varying magnetic field is non‐conservative and can be described by electric scalar potential and magnetic vector potentials.

The magnitude of vector potential is dominant in axial and circumferential direction whereas the magnetic flux density is significant in radial direction. Magnetic scalar potential approach evaluates only the radial component of magnetic flux density and electric field intensity is reasonably the same as that of the magnetic vector potential approach.

Semi‐analytical finite element method is used in this paper and the vector potential is formulated in cylindrical coordinates.

Institutions and organizations are increasingly using the digital media to communicate with stakeholders on a day-to-day basis and during crisis situations. Therefore, this chapter presents a bibliographic analysis on digital corporate communication technologies. The grounded theory’s inductive approach was used to capture and interpret the findings from Scopus-indexed publications. The articles were scrutinized in their entirety, including their research questions, methodologies and interpretation of the findings. Afterwards, this contribution identifies the opportunities and challenges that emerged during an unprecedented coronavirus (COVID-19) outbreak. In conclusion, it implies that there is scope for institutions and organizations to incorporate digital and social media in their crises’ communications and risk management plans. This will enable them to be in a better position to engage in credible and transparent dialogic communications with different stakeholders.

To examine the mechanical properties of TiN PVD coated Ti‐6Al‐4V alloy through three‐point bending tests.

Ti‐6Al‐4V alloy is cut in size and polished and cleaned chemically before TiN PVD coating process. INSTRON three‐point bending equipment is used to conduct the bending tests for TiN coated and uncoated workpieces. During the tests, the load and displacement characteristics were recorded. The tests were terminated when the coating failed. Micrographs of surface and crack sites were obtained by SEM.

Coating failure occurs due to shearing effect on the tensile surface. The spalling and buckling of the coating on the compressive surface are observed. The compressive stress generated on the top surface (where the indent is in contact) did not cause adhesive failure of the coating. Moreover, cohesive cracks occur on the tensile surface of the coating. The crack ledge under the action of shear stress appears on the tensile surface of TiN coating and multi cracking of coating is resulted. The crack spacing is small indicating sliding and splitting separation between the adjacent columns in the coating.

The tests can be extended to include the duplex treated workpieces such as the heat treatment of surface prior to TiN coating. This enhances the interface properties of the coating and base alloy.

The results can be used to assess the TiN coating applications in cutting tools, particularly drill bits and punches.

This paper provides information on mechanical behavior of TiN coating when subjected to bending force and offers practical help for the researchers and scientists working in the coating area.

This study examines the perception and attitudes of academicians regarding factors that influence the commercialization of university research.

The data sample was drawn using a proportionate stratified sampling approach. A self-administered survey was used to obtain data regarding the perception of academicians on the factors that contribute to research commercialization. A total of 131 academicians completed the survey. Multiple regression analysis was used to test the hypotheses.

The results showed that two factors are significant and positively related with commercialization: the academician's behaviour and University-Industry collaboration. Surprisingly, the factors of innovativeness and Intellectual Property management did not have a significant relationship with commercialization.

For future work, researchers should conduct in-depth interviews with the executive management at research universities and at the Ministry of Education Malaysia to complement our quantitative survey. These decision-makers act as funding sources for commercialization and can provide richer evidence regarding important factors affecting commercialization. They can also provide insight on the issues that prevent the commercialization of research from becoming a reality.

Commercialization of Malaysia's university research findings is a critical agenda item in the National Higher Education Strategic Plan. However, in Malaysia, the rate of commercialization of academic research is still unsatisfactory. This study provides important insights regarding intentions behind commercialization by depicting how factors of academic research (i.e. academician's behaviour, innovativeness, Intellectual Properties management, University-Industry collaboration) influence commercialization.

In this paper, a vibration measuring technique that relies on the use of piezoelectric material and is originally developed to measure the vibration of turbine blade is adopted to measure the vibration of cutting tool in turning. The piezoelectric material is embedded at the root of the cutting tool. The scope of this research is to investigate the feasibility of using this technique by first conducting ANSYS simulation to solve the coupled field equations that govern the piezoelectric phenomenon followed by experimental work to compare the measured data with those obtained by conventional method to have an insight into the effectiveness of the adopted technique. Both simulation and experimental results show that the use of an embedded PZT sensor at the root of cutting tool is very useful for measuring vibration and can be used for further cutting operation control. In addition, it has captured more information than conventional vibration measurement techniques.

Vibration measurement of root-embedded PZT material to convert the dynamic cutting forces into vibration signals that can be used in cutting process optimization and improvement of cutting quality.

PZT material is found to be very responsive to high-frequency vibrations such that it can catch Chatter phenomena and can be used in developing control strategies.

Mainly used for turning cutting process in this research. Other manufacturing process like milling special tool holder designs.

Can be used as online monitoring systems for cutting tool holders.

Engineer and technician aid in quality assurance and control.

The new approach of embedding PZT material at the cutting tool root and the signals presentation and processing.