Sílvia Monteiro Fonseca, Sara Faria, Sónia Cunha, Márcio Silva, M. Joaquina Ramos, Guilherme Azevedo, Rui Campos, António Ruão Barbosa and Cristina Queirós
This study aims to explore patterns of Emergency Medical Services (EMS) personnel's mental health, regarding their levels of anxiety, depression, stress, COVID-19 anxiety…
Abstract
Purpose
This study aims to explore patterns of Emergency Medical Services (EMS) personnel's mental health, regarding their levels of anxiety, depression, stress, COVID-19 anxiety, obsessive-compulsive symptoms and well-being; and to explore variables that contribute to these patterns, among sociodemographic/professional and COVID-19 experience variables.
Design/methodology/approach
Participants were 214 EMS personnel, who answered the Patient-Health Questionnaire, Perceived Stress Scale, COVID-19 Anxiety Scale, Obsessive-Compulsive Inventory, Well-Being Questionnaire and COVID-19 related questions.
Findings
EMS personnel showed an adequate psychological adjustment during COVID-19. Two clusters/patterns were found: the poorly (34%) and the well (66%) psychologically-adjusted. Personnel's age, COVID-19 fear and workplace security measures' adequacy contributed to which pattern they were more likely to belong to.
Research limitations/implications
Despite being cross-sectional and not controlling for pre-COVID-19 data, this study adds to the COVID-19 literature. Findings call for the need to explore: other COVID-19 fears; how personnel perceive workplace security measures; COVID-19 valid instruments; pre-COVID-19 data; and mental health patterns with different rescuers.
Practical implications
Findings explored EMS personnel's patterns of mental health during the COVID-19, as well as its covariates. Results allow to better prepare emergency management, which can develop prevention strategies focused on older professionals, COVID-19 related fears and how personnel assess security measures.
Originality/value
This study contributes to the scarce literature focused on COVID-19 mental health patterns instead of focussing on isolated mental health variables, as well as what contributes to these patterns. Moreover, it is one of the few studies that focused on EMS personnel rather than hospital staff.
Details
Keywords
Daiane Costa dos Santos, Josemar Gonçalves de Oliveira Filho, Jhessika de Santana Silva, Milena Figueiredo de Sousa, Marcio da Silva Vilela, Marco Antonio Pereira da Silva, Ailton Cesar Lemes and Mariana Buranelo Egea
Okara, which is the residue of hydrosoluble extract from soybean obtained after soymilk and tofu production, has high nutritional value and can be used for ingredient in specific…
Abstract
Purpose
Okara, which is the residue of hydrosoluble extract from soybean obtained after soymilk and tofu production, has high nutritional value and can be used for ingredient in specific food products. This study aims to evaluate the production and properties (physicochemical, microscopical and functional ones) of okara flour (OF) obtained from okara as a by-product of soymilk and tofu production.
Design/methodology/approach
Wet okara resulted from the soymilk process underwent convective drying up to reach mass stability (60°C for 12 h). OF properties were analyzed by official methods by AOAC, i.e. mineral composition was evaluated by atomic absorption equipment; color; water absorption index (WAI); milk absorption index (MAI); oil absorption capacity (OAC); and foam capacity (FC) required mixtures with water, milk and oil, separation and gravimetry, respectively; and microstructure was determined by a scanning electron microscope.
Findings
Results showed the potential OF has as a source of protein (24.74 g/100 g) and dietary fiber (58.27 g/100 g). Regarding its color after the drying process, OF was markedly yellow (b* parameter 20.16). Its WAI was 3.62 g/g, MAI was 4.33 g/g, OAC was 3.68 g/g and FC was 1.32 per cent. The microscopic analysis of OF showed that both loose and agglomerated particles had irregular structures and indefinite forms.
Originality/value
Production of flour from wet okara can be an alternative use of this by-product. This study showed important characteristics of OF and its possible application to the food industry. Thus, OF was shown as a potential ingredient with high nutritional value.
Details
Keywords
Claudio Oliveira De Moraes, José Americo Pereira Antunes and Márcio Silva Coutinho
This paper analyzes the effect of the banking market (concentration and competition) on financial development.
Abstract
Purpose
This paper analyzes the effect of the banking market (concentration and competition) on financial development.
Design/methodology/approach
In order to estimate the effects of banking concentration and competition on financial development, we conducted an empirical analysis using the System Generalized Method of Moments (S-GMM) through a dynamic panel data model.
Findings
The main results suggest that concentration and competition affect financial development. In particular, an increase in bank concentration may inhibit the country's financial development, due to the lack of competition. Our results do not confirm the controversy between concentration and competition, suggesting that concerning financial development, concentration is the reverse of competition.
Practical implications
The results of this study add a new perspective on banking market power: a financial system concentrated or uncompetitive constrains financial development.
Originality/value
The literature that combines the investigation of the effects of banking market structure (concentration) and banking market conduct (competition) on financial development is scarce. Although a concentrated banking sector can reduce competition through barriers to new entrants (which could expand financial services offer), it is also true that a concentrated banking sector can be competitive. In order to avoid the controversy, our paper chooses to look into a comprehensive approach considering independent measures of bank concentration and bank competition, which together refer to the banking framework.
Details
Keywords
Eduardo Márcio Santos Galdino da Silva, Alessandra Ferrari Weber, Marina Figueiredo Moreira and Severino Moreira da Silva
The purpose of this article is to investigate the interrelationships between innovation climate and human capital in the development of dynamic capabilities related to innovation…
Abstract
Purpose
The purpose of this article is to investigate the interrelationships between innovation climate and human capital in the development of dynamic capabilities related to innovation. The study presents a set of concepts about variables involved in the innovation process and their interrelationship, addressing the analysis of international scientific production related to the antecedents of the innovation climate, human capital and dynamic capabilities.
Design/methodology/approach
A review of the literature from 1998 to 2018 was carried out, using descriptive statistical methods, at first, and qualitative analysis of the results in order to visualize the current configuration of the field of study of innovation background.
Findings
The results demonstrate a significant number of studies relating human capital and dynamic capabilities and little quantitative significance in studies relating to a climate of innovation and dynamic capabilities. The research describes how the dynamic capabilities of innovation have been approached in a conceptual model based on the perspective of human capital and innovation climate.
Research limitations/implications
The study did not contemplate the analysis of the interrelationship between the resource configuration construct and the dynamic innovation capacities (part of the gap pointed out by Tuzovic, Wirtz and Heracleous (2018), constituting a perceptible limitation of the analyzes carried out in this article.
Practical implications
The influence of the innovation climate construct and its relationship with dynamic innovation capabilities deserves greater attention in research with an empirical approach, constituting a field to be explored by scientific research in organizations.
Originality/value
The research sought to investigate the gap involving the interrelations between innovation climate and human capital in the development of dynamic capabilities related to innovation, indicating the need for further empirical studies on the subject.
Details
Keywords
Eder Costa, Nelis Luiz, Marcio da Silva, Alisson Machado and Emmanuel Ezugwu
This paper seeks to evaluate the influence of tellurium content on the machinability of the microalloyed pearlitic steel (DIN 38MnS6). Two grades of steels were used, one with…
Abstract
Purpose
This paper seeks to evaluate the influence of tellurium content on the machinability of the microalloyed pearlitic steel (DIN 38MnS6). Two grades of steels were used, one with high (27 times greater) tellurium content and one with a low tellurium content. Machinability of the steel was determined by the number of holes drilled by the tool before undergoing severe deformation. The drilling test matrix was prepared using a fractional factorial design with five input variables studied at two levels (25‐1). Other variables investigated include cutting speed (45 and 60 m/min), feed rate (0.15 and 0.25 mm/rev), geometry of the twist drills and use of minimum quantity lubrication (MQL) at the flow rates of 30 and 100 ml/h. Statistical analysis of the results revealed that composition of the work material was most influential on tool performance. Addition of tellurium to the steel significantly improved machinability, increasing the number of drilled holes by over 100 per cent. The MQL flow rate was the least influential as increase in the flow from 30 to 100 ml/h reduced drill life only by about 9 per cent.
Design/methodology/approach
The drilling tests were carried out in the vertical position, up‐down, without pre‐holes (full drilling). Cutting speeds of 45 and 60 m/min and feed rates of 0.15 and 0.25 mm/rev were employed. Drills with two sharpening types were tested. Cutting fluid used was vegetable based and applied using the MQL technique at flow rates of 30 and 100 ml/h. The rejection criterion adopted was severe deformation of the drills and the number of machined holes was used to measure the machinability of the material.
Findings
Of all the variables investigated in this study, the least influential on drill performance is the MQL flow rate. Increase in the flow rate from 30 to 100 ml/h reduced drill performance by 9 per cent, contrary to expectation. This is a result of the cooling‐lubricant action balance promoted by the cutting fluid applied in low quantities (MQL). The most influential variable on drill performance is addition of Te to the work material which gave over twofold (103 per cent) improvement in drill performance at the cutting conditions investigated. The Te particles act at the chip‐tool interface, reducing the work necessary to shear the material during chip formation. Increase in both the cutting speed and the feed rate both lowered drill performance during machining due to associated increase in cutting temperature which tended to accelerate thermally related wear mechanisms.
Originality/value
This work was conducted to evaluate the machinability of a novel alloyed steel employed in the automobile industry. Drilling was considered as most automobile components especially the engine block is designed with many holes which require drilling process.
Details
Keywords
Marcio Bacci da Silva and James Wallbank
Suggests that a very low volume of lubricant is enough to improve the cutting operation because the area that requires lubrication is small. An estimate of the volume of lubricant…
Abstract
Suggests that a very low volume of lubricant is enough to improve the cutting operation because the area that requires lubrication is small. An estimate of the volume of lubricant necessary has been carried out (7.2ml h‐1) and some comments are presented about results of previous experiments using extremely low volumes of lubricant (108ml h‐1). The low volume of lubricant is applied in the same way as the conventional system. In these previous experiments the effect of lubrication is measured by surface finish, cutting force and workpiece temperature. The improvement in surface finish when low volume of lubricant is applied is similar to the results obtained with tests carried out using the conventional cutting fluid system. This improvement is not due to lubrication on the rake face to avoid built‐up edge, but action on the machined surface after it has been formed.
Details
Keywords
The figure of the femme fatale is attached to a range of contested meanings around femininity, sexuality and violence. Despite its ambiguity and its origins in art, myth and…
Abstract
The figure of the femme fatale is attached to a range of contested meanings around femininity, sexuality and violence. Despite its ambiguity and its origins in art, myth and fiction, the term has proven popular in giving a name to violent articulations of female power in non-fictional settings by journalists. In this chapter, I outline the figure of the femme fatale as an archetype of women's violence that appears throughout Western popular culture, and provide an overview of the term's definitions and cultural meanings. In doing so, I trace the figure's movement across different forms and genres of popular culture. I identify a number of themes in the existing scholarship around the figure: feminist criticism of the figure; the value that feminist film scholars have found in the figure as a symbol of power and sexual transgression; the relationship between the femme fatale, race and the colonial imagination; and the way the idea of the femme fatale has been used in reporting of real-life women's violence.
Fellipe Silva Martins, Leonardo Vils, Fernando Antonio Ribeiro Serra, Wanderley da Silva Junior and Domingos Márcio Márcio Rodrigues Napolitano
Supply chains (SCs) depend on interorganizational relationships (IORs) to function optimally, yet crises may lessen the knowledge flows therein. This paper aims to address this…
Abstract
Purpose
Supply chains (SCs) depend on interorganizational relationships (IORs) to function optimally, yet crises may lessen the knowledge flows therein. This paper aims to address this issue by proposing a mediation effect between knowledge generation and market orientation by crisis perception in SC.
Design/methodology/approach
Partial least square structural equation modeling was used to test the hypotheses. Data collection comprised 279 full answers of business-to-business organizations in global SCs.
Findings
The data provide evidence that, contrary to the extant literature, knowledge generation during a crisis in a SC does not mitigate crisis perception. In addition, findings suggest there are no significant differences between manufacturing and service SCs in sensemaking during crises and that during crises, SC links diminish cooperation in terms of knowledge generation and sharing and focus on individual performance.
Originality/value
The authors have found a conflicting theoretical issue – while extant literature posits setting IORs lead to high sunk cost, making IOR channels costly and reliable for information flows during crises, the behavioral perspective posits that when crises hit, exogenous shocks induce inwards focus diminishing information flows. The results provide insights on this seemingly inconsistent scenario and point to future avenues of research.
Details
Keywords
Victor Silva Corrêa, Rosileine Mendonça de Lima, Fernanda Regina da Silva Brito, Marcio Cardoso Machado and Vânia Maria Jorge Nassif
Women entrepreneurs face several challenges in creating and running ventures, especially in emerging and developing countries. In this sense, by aiming to generate inputs capable…
Abstract
Purpose
Women entrepreneurs face several challenges in creating and running ventures, especially in emerging and developing countries. In this sense, by aiming to generate inputs capable of helping overcome them, this study aims to categorize the policy, managerial and practical implications of articles whose empirical research was in one or more of the 155 emerging and developing countries. Further, although scholars have addressed female entrepreneurship in developed economies, there is scant literature in the context explored here. This article provides suggestions for new studies, helping academics fill gaps in the literature.
Design/methodology/approach
This article adopts a systematic literature review approach, performing content analysis and bibliometric description for the sample. The study comprises 77 articles selected from the Scopus and Web of Science databases.
Findings
Research concentrates on Asian countries, with lower incidences in Latin America and Africa. The policy implications focus mainly on the executive rather than legislative spheres. The practical implications focus mainly on entrepreneurial development agencies and women entrepreneurs. Among the suggestions for novel studies, those focusing on methodological choices and female enterprises stand out.
Practical implications
This paper maps and categorizes the policy, managerial and practical implications, helping to raise governments’, policymakers’ and practitioners’ awareness of the preferred strategies to overcome the challenges of female entrepreneurship.
Originality/value
This paper emphasizes reflections of mutual interest to researchers, policymakers and practitioners, filling gaps in studies that prioritize an academic audience. Regarding the academic audience, this paper contributes to innovatively categorizing suggestions for future research and building an extensive research agenda capable of guiding research in this area.
Details
Keywords
Guilherme Juliani de Carvalho, Marcio Cardoso Machado and Victor Silva Correa
This study uses the antecedents, decisions and outcomes (ADO) framework to identify how perceived risks and benefits relate to the omnichannel strategy and influence consumer…
Abstract
Purpose
This study uses the antecedents, decisions and outcomes (ADO) framework to identify how perceived risks and benefits relate to the omnichannel strategy and influence consumer behavior.
Design/methodology/approach
A systematic review was conducted on 111 articles (2014–2023) on Scopus using NVivo® software for content analysis.
Findings
The literature on omnichannel is fragmented between journals and lines of research, making it difficult to identify influential journals in the area and preventing effective convergence. When the perception of risk is greater than the perception of benefits, companies must understand how to mitigate the risk, so that the adoption of an omnichannel strategy is not canceled.
Research limitations/implications
The review is limited to one database and does not consider specific products/services or consumer profiles.
Originality/value
This review broadens understanding of omnichannel from a perspective neglected by researchers, namely risks and benefits and their impacts on organizational results. The model will clarify how the literature on omnichannel has evolved and instigate new research.