Search results

This study aims to determine the minimum force required to pull out a surface mount component in printed circuit boards (PCBs) during the wave soldering process through both experimental and numerical procedures.

An efficient experimental technique was proposed to determine the minimum force required to pull out a surface mount component in PCBs during the wave soldering process.

The results showed that the pullout force is approximately 0.4 N. Comparing this value with the simulated force exerted by the solder wave on the component (≅ 0.001158 N), it can be concluded that the solder wave does not exert sufficient force to remove a component.

This study provides a deep understanding of the wave soldering process regarding the component pullout, a critical issue that usually occurs in the microelectronics industry during this soldering process. By applying both accurate experimental and numerical approaches, this study showed that more tests are needed to evaluate the main cause of this problem, as well as new insights were provided into the depositing process of glue dots on PCBs.

Latin America experienced a long period of sustained growth since 2003 that positively impacted social and labor market indicators, including poverty. This paper contributes to the understanding of this process as it carries out a comparative study of poverty and indigence dynamics in five Latin American countries during 2003–2012. Specifically, it extends the analysis of a previously published study by broadening the time coverage and examining indigence mobility. It analyzes the extent to which countries with different levels of poverty (extreme poverty) incidence diverge in terms of exit and entry rates, and identifies the relative importance of the frequency and impact of events associated with poverty transitions. For this, a dynamic analysis of panel data is carried out using regular household surveys. Sizeable rates of poverty and indigence movements were observed in all five countries and it was found that a large proportion of poor or indigent households experienced positive events, mainly related to the labor market; however, only a small fraction of them actually exited poverty and indigence. It appeared, therefore, that even when the economy behaved reasonably well, high levels of labor turnover and income mobility (even of a negative nature) still prevail, mainly associated with the high level of precariousness and the undeveloped system of social protection that characterize the studied countries.

Companies need to innovate to remain in the market and be competitive. Thus, success will depend on your internal resources and the external sources of knowledge used. The cooperation between univerity and industry (U–I) allows companies to access resources that, in general, they do not have, allowing them to achieve innovation, competitive advantages, and competitiveness. The purpose of this study is to understand the determinants that influence U–I cooperation in creating knowledge and innovation.

This study analyzes the determinants considered essential for companies to establish cooperation processes with universities. The research uses the last community innovation survey data set, data from 14 countries, and 28,743 observations. The method uses logistic regression.

The results confirm that the company's size, the innovative capacities associated with R&D, exportation and public funds are essential and significant determinants for the cooperation with universities. On the other hand, the acquisition of machinery and training programs are not a critical factor in establishing cooperation with universities that are not in the same country. The analysis considered companies cooperation with universities of the same country, from the European Union (EU) or other countries outside EU.

In addition to providing substantial theoretical contributions on the subject, this research also provides more information about the importance of U–I cooperation, allowing to characterize companies interested in developing U–I cooperation.

This paper aims to discuss and explore the unique agency issues in Islamic banks which give rise to different agency conflicts exist in Islamic banks as compared to conventional banks. In addition, this paper critically examines agency theory in Islamic banking perspective by incorporating Islamic ethical considerations in the principal–agent setting.

This is a conceptual paper, and the discussions revolve around the review of literature of which important sources have been cited in a way that demonstrates a reasonable understanding of the topic. It attempts to create a discourse around the inclusion of Islamic ethical system in understanding the governance structure of Islamic banks.

This paper concludes that Islamic ethical system embedded in the Islamic banks business activities shapes Islamic banks into organisations that place higher ethical considerations than conventional banks. Therefore, Islamic banks are likely to have less severe agency problems relative to their conventional counterparts.

Because of the chosen research approach, the research results may lack generalisability. Therefore, researchers are encouraged to test the proposed propositions further.

As the discourse generated by the paper, it can ultimately enhance the understanding of Islamic governance structure in the perspective of agency issues.

As the discourse generated by the paper, it can ultimately enhance the understanding of Islamic governance structure in the perspective of agency issues.

The paper attempts to bring to attention the important aspect of principal–agent relationship within the Islamic banking structures and explain the role of incorporating Islamic ethical system in enhancing the understanding of the principal–agent relationship.

The purpose of this study aims to empirically examine the corporate social responsibility disclosure (CSRD) levels of conventional and Islamic banks in Malaysia. Additionally, as Malaysian banks have different shareholding patterns that are more highly concentrated than those in the developed economies, this study also investigates the impact of ownership concentration on CSRD in both types of banks.

This study employs hand-collected corporate social responsibility (CSR) data from the annual and sustainability reports of 21 conventional banks and 16 Islamic banks in Malaysia during 2010–2017. The data are then run using the pooled ordinary least square (OLS) with robust standard errors and robust regressions models together with all possible factors determining CSRD in the banking sector.

This study discovers that Islamic banks disclose a higher level of total CSRD than their conventional counterparts after controlling a number of important determinants of CSRD. These results remain consistent for four different dimensions of CSRD, i.e. employees, communities, environment and products and services. In relation to the impact of ownership concentration on CSRD level, the results show that high ownership concentration reduces the level of CSRD by Malaysian banks. However, in an additional interaction test, the result exhibits a complementary relationship between Islamic banks and ownership concentration in influencing CSRD level.

This study finds that the principle of Islamic accountability has been internalised by Islamic banks, and shaped them to put equal emphasis on the disclosure of CSR practices and the financial information disclosure.

It is recommended for all banks to ensure the integration of a more comprehensive ethical system, such as theological ethical values in every aspect of their business activities. The findings from this study also highlight the necessity for the central bank to increase their monitoring role, especially towards banks with a more concentrated ownership structure by limiting the size of shareholdings by any particular types of owners.

Only a few studies have compared CSR practices between these two types of banks, and most of them are descriptive and qualitative in nature. This study is the first that uses a robust model with a high R-squared value, which control for all possible factors determining CSRD in the banking sector.

Facility management (FM) is regarded as an emerging issue in civil engineering and is responsible for ensuring the building's expected performance. The purpose of this study is to analyze buildings' current FM processes for educational and high residential segments and propose an FM-building information modeling (BIM) (BIM6D) to understand the information flow and leading players with and without FM-BIM integration.

The research strategy was a case study with data from the FM process of two buildings. This study was carried out in three stages: diagnosis of FM of the two buildings, FM-BIM integration and information flow and leading players analysis. Maintenance activities were categorized according to periodicity and status criteria for each project element for FM-BIM integration and were visualized in the Revit design using Dynamo software.

The results of this study show differences in how FM is conducted, especially in formalization and preventive character, and similarities regarding the difficulty of foreseen and lack of control because of scattered, disconnected and incomplete information on both. The visual appeal of the FM-BIM integration facilitates information access. It optimizes the use of the digital model through the most prolonged phase of the life cycle of a building (post-occupation phase). However, FM-BIM challenges buildings that do not have digital model expertise as residential segments. This study suggests a more significant role for construction companies in these cases.

This study investigates BIM-FM integration of buildings in two different contexts and reveals the importance of a construction company's role in buildings in the residential segment. This study contributes with real-life cases on BIM in existing buildings, discussing the value and challenges of BIM in FM applications.

The purpose of this chapter is to examine how the broader characteristics of Pakistan’s public policies reflect Islamic law, how the financial crime rate has been affected by policy rules, and if the policies do indeed reflect Islamic law, how do they help the process?

It is a qualitative exploratory study where structured interviews have been conducted with experts and practitioners in Islamic Ideological Council and Parliament.

The findings constitute a threadbare discussion of financial crimes which policy takes into account under Islamic law; along with the relevant ramifications and recommendations.

It is suggested that the laws of Pakistan be studied taking Shariah density into consideration. Future research can focus on implementation of laws and policies as a factor improving governance.

This study is pertinent because financial crimes in light of Islamic law and public policy are not discussed in detail in previous research.

To map nurses’ actions performed during the care transitions from hospital to home of Covid-19 patients.

A scoping review based on the Joanna Briggs Institute guidelines was carried out. We searched in seven databases: PubMed/MEDLINE, BDENF, LILACS, SciELO, Embase, Scopus, Web of Science and Google Scholar. A two-step screening process and data extraction was performed independently by two reviewers. The findings were summarized and analyzed using a content analysis technique.

Of the total 5,618 studies screened, 21 were included. The analysis revealed nurses’ actions before and after patient’ discharge, sometimes planned and developed with the interprofessional team. The nurses’ actions included to plan and support patients’ discharge, to adapt the care plan, to use screening tools and monitor patients’ clinical status and needs, to provide health orientation to patients and caregivers, home care and face-to-face visiting, to communicate with patients, caregivers and other health professionals with phone calls and virtual tools, to provide rehabilitation procedures, to make referrals and to orient patients and families to navigate in the health system.

The results provide a broader understanding of the actions taken and challenges faced by nurses to ensure a safe care transition for Covid-19 patients from hospital to home. The interprofessional integration to discharge planning and the clinical nursing leadership in post-discharge monitoring were highlighted.

The nurses’ actions for Covid-19 patients performed during care transitions focused on coordination and discharge planning tailored to the needs of patients and caregivers at the home setting. Nurses monitored patients, with an emphasis on providing guidance and checking clinical status using telehealth tools.

This paper aims to further the discussion on Building Information Modelling (BIM) legal requirements, providing a framework with key energy parameters capable of supporting the Appointing Party in the definition of the Exchange Information Requirements (EIR) for a BIM project appointment. The EIR is described in ISO-19650–1:2018 as a fundamental step in the information delivery cycle.

A literature review on the topic of BIM energy analysis was completed to identify current knowledge gaps and support the need for the proposed framework. Afterwards, the framework was established based on the review findings and the authors’ domain knowledge. The applicability of the proposed framework was assessed through a case study, where several energy simulations were performed in three different design stages of the same BIM model.

This study identified a lack of standards and legislation capable of supporting the Appointing Party in the definition of energy-related BIM requirements. To this end, a new framework is proposed to mediate existing practices, linking prior knowledge with BIM’s new reality. The study showcases the applicability of the framework, identifying that the performance of different energy studies involves distinct Level of Development (LOD) requirements, which in turn have an impact on the modelling time and cost.

A BIM framework for the specification of information requirements in energy-related projects was developed to support the Appointing Party. The framework presents appropriate parameters for energy analysis in each design stage, as well as the suitable LOD for the BIM model.

This study aims to examine whether corporate culture and stakeholder type influence the level of corporate social responsibility disclosure (CSRD) and, if so, the motivations behind this.

An experimental method was adopted in this study to achieve the research objectives by evaluating the perceptions and motivations for CSRD among 120 participants (financial managers and accountants) from 50 financial institutions listed on Boursa Kuwait.

Results indicate that perceptions of CSRD are strongly affected by stakeholder type but not corporate culture. When these two factors are considered jointly, they do not affect the level of CSRD. Regarding motivations, participants from Conventional Financial Institutions seek legitimacy by opting to provide higher levels of CSRD to both shareholders and the general public than those from Islamic Financial Institutions.

This study has implications for three groups: institutions, society and accountants. Each group plays a crucial role in how financial institutions practicing corporate social responsibility (CSR).

Few studies have compared CSR practices between these two types of institutions, with most being descriptive. To the best of the author’s knowledge, this study is the first to use an experimental approach, which controls for all potential factors determining CSRD.