Search results

The bridge expansion joint (BEJ) is a key device for accommodating spatial displacement at the beam end, and for providing vertical support for running trains passing over the gap between the main bridge and the approach bridge. For long-span railway bridges, it must also be coordinated with rail expansion joint (REJ), which is necessary to accommodate the expansion and contraction of, and reducing longitudinal stress in, the rails. The main aim of this study is to present analysis of recent developments in the research and application of BEJs in high-speed railway (HSR) long-span bridges in China, and to propose a performance-based integral design method for BEJs used with REJs, from both theoretical and engineering perspectives.

The study first presents a summary on the application and maintenance of BEJs in HSR long-span bridges in China representing an overview of their state of development. Results of a survey of typical BEJ faults were analyzed, and field testing was conducted on a railway cable-stayed bridge in order to obtain information on the major mechanical characteristics of its BEJ under train load. Based on the above, a performance-based integral design method for BEJs with maximum expansion range 1600 mm (±800 mm), was proposed, covering all stages from overall conceptual design to consideration of detailed structural design issues. The performance of the novel BEJ design thus derived was then verified via theoretical analysis under different scenarios, full-scale model testing, and field testing and commissioning.

Two major types of BEJs, deck-type and through-type, are used in HSR long-span bridges in China. Typical BEJ faults were found to mainly include skewness of steel sleepers at the bridge gap, abnormally large longitudinal frictional resistance, and flexural deformation of the scissor mechanisms. These faults influence BEJ functioning, and thus adversely affect track quality and train running performance at the beam end. Due to their simple and integral structure, deck-type BEJs with expansion range 1200 mm (± 600 mm) or less have been favored as a solution offering improved operational conditions, and have emerged as a standard design. However, when the expansion range exceeds the above-mentioned value, special design work becomes necessary. Therefore, based on engineering practice, a performance-based integral design method for BEJs used with REJs was proposed, taking into account four major categories of performance requirements, i.e., mechanical characteristics, train running quality, durability and insulation performance. Overall BEJ design must mainly consider component strength and the overall stiffness of BEJ; the latter factor in particular has a decisive influence on train running performance at the beam end. Detailed BEJ structural design must stress minimization of the frictional resistance of its sliding surface. The static and dynamic performance of the newly-designed BEJ with expansion range 1600 mm have been confirmed to be satisfactory, via numerical simulation, full-scale model testing, and field testing and commissioning.

This research provides a broad overview of the status of BEJs with large expansion range in HSR long-span bridges in China, along with novel insights into their design.

This article aims to predict the rapid track geometry change in the short term with a higher detection frequency, and realize the monitoring and maintenance of the railway state.

Firstly, the ABA data needs to be filtered to remove the DC component to reduce the drift due to integration. Secondly, the quadratic integration in frequency domain for concern components of the vertical and lateral ABA needs to be done. Thirdly, the displacement in lateral of the wheelset to rail needs to be calculated. Then the track alignment irregularity needs to be calculated by the integration of lateral ABA and the lateral displacement of the wheelset to rail.

By comparing with a commercial track geometry measurement system, the high-speed railway application results in different conditions, after removal of the influence of LDWR, identified that the proposed method can produce a satisfactory result.

This article helps realize detection of track irregularity on operating vehicle, reduce equipment production, installation and maintenance costs and improve detection density.