Search results

This study aims to seek a new economic and environmental protection fuel tank inerting method.

The principle that serves as the basis for the cooling inerting process is described, the workflow of the cooling inerting system is designed, the mathematical model of the cooling inerting system is established, and the important performance changes of cooling inerting in the flight package line and the influence of key parameters on it are simulated by using Modelica software.

The results show that the cooling inerting system can be turned on to quickly reduce the vapour concentration in the gas phase in the fuel space and reduce the temperature below the flammability limit. Within a certain range of pumping flow, the inerting effect is more obvious when the pumping flow is larger. Simply running the cooling inerting system on the ground can remain the tank in an inert state throughout the flight envelope.

However, cooling inerting is suitable for models with fewer internal heat sources. An excessive number of internal heat sources will lead to inerting failure.

This study provides theoretical support for the feasibility of cooling inerting. Cooling inerting does not require engine air, and the cooling is mainly accomplished with air, which places a small load on the cooling system and has a much lower cost than the airborne hollow fibre film inerting technology widely used at present. It is a promising new inerting technology.

The National People’s Congress (NPC) of People’s Republic of China, the highest organ of state power, is popularly seen as a rubber-stamp entity. However, it has been substantially evolving its roles to accommodate the governance discourses within China’s political system over the decades. This study aims to explore the changes of governance discourse of the NPC within China’s political system through which to offer a thorough understanding of the NPC’s evolving substantial role in current China.

This study deploys a historical approach to explore the changes of governance discourse of the NPC that has seen a growing importance in China’s political agenda, as argued by this study.

The authors find that the NPC has been substantially evolving its role within China’s political system in which the Chinese Communist Party has created different governance discourses. Besides, the NPC and its Standing Committee have asserted its authority as a substantial actor within China’s political system. The NPC is no longer functioned as a rubber-stamp institution, though it is still popularized as a rubber stamp by many scholars.

This study is a historical elaboration on the development of NPC under three governance discourses. It might be, to some extent, relatively descriptive in nature.

This study, therefore, sheds some light on a revisit on the governance discourses in current China.

The authors’ conclusions are based on mathematical derivations that are supported by computer simulations and three worked examples in applications of economics and finance. Finally, the authors provide a link to a computer program so that researchers can perform the analyses easily.

Based on a parameter estimation goal, the present work is concerned with determining the minimum sample size researchers should collect so their sample medians can be trusted as good estimates of corresponding population medians. The authors derive two solutions, using a normal approximation and an exact method.

The exact method provides more accurate answers than the normal approximation method. The authors show that the minimum sample size necessary for estimating the median using the exact method is substantially smaller than that using the normal approximation method. Therefore, researchers can use the exact method to enjoy a sample size savings.

In this paper, the a priori procedure is extended for estimating the population median under the skew normal settings. The mathematical derivation and with computer simulations of the exact method by using sample median to estimate the population median is new and a link to a free and user-friendly computer program is provided so researchers can make their own calculations.

The purpose of this paper is to clarify agricultural services into five categories, including agricultural materials supply service, financial service, technical service, machinery service and processing and sales service, and to examine the effect of agricultural services on cost saving of rice production in China.

Based on a three-year panel data set covering 3,421 rice farmers in 12 Chinese provinces collected from the state rice industry experiment stations’ fixed watch points of China Agriculture Research System, a stochastic frontier model which takes the price vectors of input variables into cost function is developed by stochastic frontier analysis method in the study.

There is a deviation between the actual cost and the minimum cost on rice production in China due to the loss of cost efficiency, whose score is 0.7983 at the mean. Agricultural services can help improve cost efficiency, thus contributing to cost saving. Specifically, the effect of technical service on cost saving is the highest, followed by processing and sales service, machinery service, financial service and agricultural materials supply service.

The results of this paper are of great significance to the effectiveness and efficiency of the targeted agricultural services and indicate implications for policy improvement under the context of clear upward trend of agricultural production costs.

This study aims to explore the domain of leader’s creativity and suggests that leader’s creativity can be present as both worker-role creativity and manager-role creativity. Then, the study examines the influence of leader’s worker-role creativity and manager-role creativity on employees’ creativity and team creativity. As a contextual factor, the identification with leader is taken as a moderator at both the individual and team levels.

With data that was collected from 229 employees and 32 team leaders in entrepreneurial and R&D teams of China, hierarchical regression is conducted to test the hypotheses at individual and team levels separately.

The results show that leader identification plays a different role in moderating the effects of worker-role creativity and manager-role creativity on employees’ and team creativity. For the relationships between worker-role creativity and employees’ and team creativity, they are positive when leader identification is high and negative when it is low. For the relationships between manager-role creativity and team creativity, it is stronger when leader identification is higher rather than lower.

This study answers the call for studying the roles of creative role models and provides new evidence of the leader as a role model. The exploration of the domain of leader’s creativity and the different effects on creative outcome brings an interesting perspective on creativity and leadership research.

The present study draws on the advance to develop the content of leader’s creativity. Then, the moderating role of identification with leader between leader’s creativity and employees’ creativity and team creativity is comprehensively examined.

Drawing on signaling theory and social capital theory, this study aims to examine the underlying mechanisms and contingencies of the relationships between social capital (SC) and collaboration in buyer-supplier relationships (BSRs). This is achieved by evaluating the mediating effect of psychological contract fulfillment (PCF) and the moderating roles of guanxi orientation and market uncertainty.

The current study used a survey method to collect data from 271 buyers in China. Structural equation modeling (SEM) and moderated regression analysis were applied to examine the hypotheses.

The positive effect of structural and relational SC on buyers’ collaborative behaviors is partially mediated by buyers’ PCF. In contrast, the positive effect of cognitive SC on collaboration is fully mediated by buyers’ PCF. Guanxi orientation strengthens the indirect effect of buyers’ PCF on the cognitive SC-collaboration relationship and relational SC-collaboration relationship. Market uncertainty amplifies the relational SC-collaboration relationship.

Prior studies have presented mixed evidence of the effect of SC on collaboration and have paid little attention to the underlying mechanisms and conditions moderating the effect. This research proposes a theoretical model that integrates signaling theory and social capital theory to explore how three dimensions of SC can enhance buyer collaboration through buyers’ PCF under different levels of guanxi orientation and market uncertainty.

The ecological environment of the Loess Plateau, China, is extremely fragile under the context of global warming. Over the past two decades, the vegetation of the Loess Plateau has undergone great changes. This paper aims to clarify the response mechanisms of vegetation to climate change, to provide support for the restoration and environmental treatment of vegetation on the Loess Plateau.

The Savitsky–Golay (S-G) filtering algorithm was used to reconstruct time series of moderate resolution imaging spectroradiometer (MODIS) 13A2 data. Combined with trend analysis and partial correlation analysis, the influence of climate change on the phenology and enhanced vegetation index (EVI) during the growing season was described.

The S-G filtering algorithm is suitable for EVI reconstruction of the Loess Plateau. The date of start of growing season was found to gradually later along the Southeast–Northwest direction, whereas the date of the end of the growing season showed the opposite pattern and the length of the growing season gradually shortened. Vegetation EVI values decreased gradually from Southeast to Northwest. Vegetation changed significantly and showed clear differentiation according to different topographic factors. Vegetation correlated positively with precipitation from April to July and with temperature from August to November.

This study provides technical support for ecological environmental assessment, restoration of regional vegetation coverage and environmental governance of the Loess Plateau over the past two decades. It also provides theoretical support for the prediction model of vegetation phenology changes based on remote sensing data.

The applications of multi-agent systems (MASs) are considered to be among the most promising paradigms for detailed investigations and reliable problem-solving methods, and MAS applications make it possible for researchers and practitioners to better understand complex systems. Although a number of prior studies have been conducted to address complex issues that arise from construction projects, few studies have summarised the applications and discussed the capacity of MASs from the perspective of construction management. To fill the gap, this paper provides a comprehensive literature review of MAS applications from the perspective of construction management.

Web of Science and Scopus are the most commonly used international databases in conducting the literature reviews. A total of 86 relevant papers published in SCI-Expanded, SSCI and Ei Compendex journals related to the application of MASs from the perspective of construction management are selected to be analysed and discussed in this paper.

Based on the 86 collected publications, the utilisations of MASs to support the management of the supply chain and the improvement of project performance are identified from the perspective of construction management, the characteristics and barriers of current MAS applications are analysed, a framework for developing agent-based models to address complex problems is proposed, and future research directions of MAS applications are discussed.

This review can serve as a useful reference for scholars to enhance their understanding of the current research and guide future research on MASs. The proposed framework can help build agent-based models to address complex problems in construction management.

Basic safety message (BSM) is a core subset of standard protocols for connected vehicle system to transmit related safety information via vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I). Although some safety prototypes of connected vehicle have been proposed with effective strategies, few of them are fully evaluated in terms of the significance of BSM messages on performance of safety applications when in emergency.

To address this problem, a data fusion method is proposed to capture the vehicle crash risk by extracting critical information from raw BSMs data, such as driver volition, vehicle speed, hard accelerations and braking. Thereafter, a classification model based on information-entropy and variable precision rough set (VPRS) is used for assessing the instantaneous driving safety by fusing the BSMs data from field test, and predicting the vehicle crash risk level with the driver emergency maneuvers in the next short term.

The findings and implications are discussed for developing an improved warning and driving assistant system by using BSMs messages.

The findings of this study are relevant to incorporation of alerts, warnings and control assists in V2V applications of connected vehicles. Such applications can help drivers identify situations where surrounding drivers are volatile, and they may avoid dangers by taking defensive actions.

The purpose of this study is to explore the relationship and effect of management support on individual creativity performance by focusing on the individual learning opportunity, adaptability to change and learning motivation in Hong Kong manufacturing companies.

This study is based on survey data collection by using a respondent-driven approach from 266 employees working in Hong Kong-based manufacturing firms. The model and hypotheses were tested by employing variance-based structural equation modeling.

The findings indicate that management support has a positive effect on individual learning opportunity and creativity performance. Also, a significant positive relationship between individual creativity, performance, individual learning opportunity, adaptability to change, and learning motivation has been yielded. The management support has an overall positive link with all variables directly and indirectly.

Top management can foster employee creativity by supporting and providing learning opportunities and motivating employees to develop adaptive capability at an individual level.

An empirical study of how management support can foster individual creativity performance and individual learning opportunity. This study is one of the first to examine the positive relationship between management support and individual creativity by validating a purposed model, especially in the context of the Hong Kong manufacturing industry.