Donghui Liu, Lingjie Meng and Yudong Wang
Oil is crucial for industrial development. This paper investigates the impacts of oil price changes on China's industrial growth and examines whether the impacts are asymmetric…
Abstract
Purpose
Oil is crucial for industrial development. This paper investigates the impacts of oil price changes on China's industrial growth and examines whether the impacts are asymmetric. The estimations can help determine how oil price shocks are transmitted throughout the economy.
Design/methodology/approach
This paper adopts West Texas Intermediate (WTI) crude oil price and industrial sector output and uses monthly data. The recently developed nonlinear autoregressive distributed lag (NARDL) model is employed to illustrate the effects in both the short term and long term. Importantly, under NARDL framework, this paper examines whether the impacts are asymmetric by decomposing oil price shocks into their positive and negative partial sums.
Findings
The empirical results prove clear evidence of asymmetries in the short term, long term or both terms. Specifically, some sectors benefit from, rather than suffer from higher oil prices, even some energy-intensive sectors, i.e. C31 (Smelting and Pressing of Ferrous Metals) and C32 (Smelting and Pressing of Non-ferrous Metals). However, the effects on some other energy-intensive sectors appear insignificant. Additionally, the results prove significantly negative responses in some sectors in the long term, and most of these sectors are in the top half of the ranking by energy consumptions.
Originality/value
This paper studies the economic responses at a disaggregated level by employing industry-level data. NARDL method is used to decompose oil price changes into their increases and decreases and investigate the asymmetries in the impacts of oil price changes.
Details
Keywords
Shuping Cheng, Lingjie Meng and Lu Xing
The purpose of this paper is to examine the effects of energy technological innovation on carbon emissions in China from 2001 to 2016.
Abstract
Purpose
The purpose of this paper is to examine the effects of energy technological innovation on carbon emissions in China from 2001 to 2016.
Design/methodology/approach
Conditional mean (CM) methods are first applied to implement our investigation. Then, considering the tremendous heterogeneity in China, quantile regression is further employed to comprehensively investigate the potential heterogeneous effect between energy technological innovation and carbon emission intensity.
Findings
The results suggest that renewable energy technological innovation has a significantly positive effect on carbon emission intensity in lower quantile areas and a negative effect in higher quantile areas. Contrarily, fossil energy technological innovation exerts a negative correlation with carbon emission intensity in lower quantile areas and a positive effect on carbon emission intensity in higher quantiles areas.
Originality/value
Considering that energy consumption is the main source of CO2 emissions, it is of great importance to study the impact of energy technological innovation on carbon emissions. However, the previous studies mainly focus on the impact of integrated technological innovation on carbon emissions, ignoring the impact of energy technological innovation on carbon emissions mitigation. To fill this gap, we construct an extended STIRPAT model to examine the effects of renewable energy technological innovation and fossil energy technological innovation on carbon emissions in this paper. The results can provide a reference for the government to formulate carbon mitigation policies.
Details
Keywords
Zhaoling Sun, Jiaguang Meng, Yanning Yang, Lingjie Yu and Chao Zhi
The purpose of the paper is to study the dyeing process of three-dimensional-printed (3DP) fabrics, and then study the wearability of the fabrics before and after dyeing to…
Abstract
Purpose
The purpose of the paper is to study the dyeing process of three-dimensional-printed (3DP) fabrics, and then study the wearability of the fabrics before and after dyeing to provide a feasible dyeing method of 3DP clothes.
Design/methodology/approach
In this regard, the thermoplastic polyurethane (TPU) was applied during the process of 3DP. Then, the imitation twill weave (ITW) was printed with fused deposition modeling (FDM) technology using TPU and the suspension of Disperse Blue 2BLN (as a dye) was prepared. After that, the single factor analysis and orthogonal experiment of dyeing were combined to obtain the optimized dyeing process. And then, ITW fabrics were dyed through the weak acid-low temperature dyeing method. In the end, in order to discuss the wearability of ITW fabrics, the dyeing experiments, including permeability, wrinkle recovery angle, bending rigidity, crock fastness and washing colorfastness were carried out.
Findings
The surface morphology of TPU before and after spinning was established by field emission scanning electron microscopy (FE-SEM), which was confirmed the surface of TPU getting smoother after spinning. The wearability of the fabric after dyeing was not affected compared with before dyeing. Moreover, both colorfastness grades were above 4–5 with high colorfastness.
Originality/value
The article provides a method for 3DP dyeing, which can solve the problem of a single color. And the wearability demonstrates that 3DP fabrics after dyeing-based TPU have more value for clothing than before dyeing.
Details
Keywords
Mohamed Gobara and Mohamed Shamekh
This paper aims to study both the mechanical properties and the corrosion behavior of the synthesized in situ (TiC-TiB2) particulates/AZ91 magnesium matrix composite and compare…
Abstract
Purpose
This paper aims to study both the mechanical properties and the corrosion behavior of the synthesized in situ (TiC-TiB2) particulates/AZ91 magnesium matrix composite and compare the results with that of the conventional AZ91D alloy.
Design/methodology/approach
Scanning electron microscope (SEM) equipped with energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD) were used to study the surface morphology and crystalline structure. Mechanical compression tests were used to investigate the mechanical performance according to ASTM E9-89a. The corrosion behavior of the synthesized magnesium alloy was examined using both electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization techniques in dilute Harrison solutions.
Findings
The microstructure of the Mg composite showed a uniform distribution of reinforcing phases. Also, the reinforcing phases were formed without residual intermediate phases. The addition of titanium and boron carbides not only enhanced the mechanical properties of the matrix but also improve its corrosion behavior.
Originality/value
This is the first time that magnesium matrix composite has been to synthesized with TiC and TiB2 particulates starting from starting from Ti and B carbides powder without adding aluminium using practical and low-cost technique (in situ reactive infiltration technique). This paper studies the corrosion behavior of synthesized Mg matrix in dilute Harrison solution and compares the results with that of conventional AZ91D.