Lijie Ding, Yijia Cao, Guangzeng Wang and Meijun Liu
The purpose of this paper is to study the failures spread in complex power grids, and what topology of power grids is best for preventing or reducing blackouts.
Abstract
Purpose
The purpose of this paper is to study the failures spread in complex power grids, and what topology of power grids is best for preventing or reducing blackouts.
Design/methodology/approach
Based on the study of cascading failure models of complex power networks, an extended dynamical cascading failure model is proposed. Based on this model, two representatives of the complex power grids, the small‐world network and the scale‐free network, were simulated for line cascading failure. The power loss caused by cascading failures and the spreading speed of cascading failure are discussed.
Findings
Power loss caused by cascading failures in the small‐world network is much larger than that in the scale‐free network, and the speed of cascading failure propagation in the small‐world network is much faster than that in the scale‐free network.
Research limitations/implications
The establishment of the dynamical cascading failure model considering other protection devices needs further study.
Practical implications
The results of this study can be beneficial in system planning and upgrading.
Originality/value
An extended dynamical cascading failure model is proposed and cascading failures in different topology of power grid are discussed.
Details
Keywords
Minghua Pang, Zhenjiang Li, Yikun Hu, Zichen Gan, Lijie Ma and QigaoFeng Feng
This study aims to improve the lubrication performance of molybdenum disulfide powders at textured surface of cemented carbide materials, a squeeze motion of vibration assistance…
Abstract
Purpose
This study aims to improve the lubrication performance of molybdenum disulfide powders at textured surface of cemented carbide materials, a squeeze motion of vibration assistance method was introduced and investigated.
Design/methodology/approach
Surface texture was fabricated on YT15 cemented carbide samples using a laser marking machine. After that, a tribological experiment was carried out on a self-built friction testing machine under different amplitude and frequency of squeeze motion conditions. Moreover, a simulation model was also established to verify the principle of squeeze motion on the lubrication performance improving of MoS2 particles at textured interfaces.
Findings
Analysis results indicated that surface texture on test sample can increase the storage ability of solid lubrication particles, and the lubrication film at the contact interface is more easily formed due to the reciprocating action. Squeeze motion can improve the storage ability of it due to an intermittent contact, which provides an opportunity for MoS2 particles infiltration, and then a more uniform distribution and load-bearing properties of force chain are also established and formed simultaneously. Thus, a better tribological performance at the contact interface is obtained.
Originality/value
The main contribution of this work is to provide a reference for the molybdenum disulfide powder lubrication with textured surface of cemented carbide materials.
Peer review
The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2024-0166/
Details
Keywords
Lijie Yang, Shuai Yin and Qingna Niu
The purpose of this paper is to analyze the cavitation characteristics of a water hydraulic axial piston motor (WHAPM) to improve the water motor performance, to reduce the…
Abstract
Purpose
The purpose of this paper is to analyze the cavitation characteristics of a water hydraulic axial piston motor (WHAPM) to improve the water motor performance, to reduce the vibration and noise and to prolong the service life of the motor.
Design/methodology/approach
The computational fluid dynamics (CFD) software PumpLinx is chosen to do cavitation analysis of the WHAPM. In this case, first, cavitation mechanism of the water piston motor is analyzed in depth. Then, considering the effects of bubble dynamics, the rate of phase transition, turbulence effects and non-condensable gas, the full cavitation model is selected, the dynamic CFD numerical model of internal flow field on the water hydraulic piston motor is established based on PumpLinx software and the fluid cavitation inside is numerically studied. Finally, the influence of the valve plate and pistons on motor cavitation is analyzed.
Findings
Research results show that there are two serious cavitation regions: one is the pressure transition region of the valve plate that is near the top dead center, and the other is the low-pressure region of the piston that is near the low-pressure transition area. Moreover, the more serious cavitation area is on the valve plate region.
Originality/value
The simulation results show that the proposed algorithm is able to detect the cavitation characteristics of the water piston motor. Besides, it is deduced that valve-plate structure optimization is more important than pistons to reduce cavitation influence.
Details
Keywords
Xiuyun Wang, Guofei Cao, Bei Wang, Yunying Xing, Minxu Lu, Lijie Qiao and Lei Zhang
The purpose of this study is to elucidate the effects of electric-arc-induced ablation on the corrosion behavior of pipeline steel in neutral and high pH environments.
Abstract
Purpose
The purpose of this study is to elucidate the effects of electric-arc-induced ablation on the corrosion behavior of pipeline steel in neutral and high pH environments.
Design/methodology/approach
Electrochemical testing, an atmospheric-pressure immersion experiment and various techniques (e.g. scanning electron microscopy, energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy) were used to examine the effects of electric-arc-induced ablation on the corrosion behavior of pipeline steel in neutral and high pH environment.
Findings
Electric-arc-induced ablation occurred preferentially in areas of inclusion. The corrosion resistance of an ablation pit was lower than that of non-ablation areas. In the neutral soil solution, general corrosion was the dominant corrosion that affected pipeline steel; the effect of ablation was small but pitting corrosion could still be induced. In a high pH environment, the samples without ablation were passivated, whereas the samples with ablation pits could not be passivated; the ablation pits were likely to develop pitting corrosion.
Originality/value
Electric-arc-induced ablation can reduce the corrosion resistance of pipeline steel under high-voltage direct current interference.
Details
Keywords
Yunxia Shi, Rumeng Zhang, Chunhao Ma and Lijie Wang
This paper aims to discuss the effect of frontline employees' emotional labor (surface acting vs. deep acting) on customer satisfaction and the moderating role of responsibility…
Abstract
Purpose
This paper aims to discuss the effect of frontline employees' emotional labor (surface acting vs. deep acting) on customer satisfaction and the moderating role of responsibility attributions in the situation of robot service failure.
Design/methodology/approach
The scenario-based experimental method was designed to perform hypothesis testing and SPSS was used to analyze the data from the 363 questionnaires collected.
Findings
The results indicate that (1) employees' emotional labor recovery has a double-edged sword effect. Deep acting improves customer satisfaction, while surface acting undermines the effectiveness of service recovery and leaves customer satisfaction below previous levels. (2) Customers' responsibility attributions for service failure moderate the effect of service recovery.
Originality/value
To the best of the authors’ knowledge, this is the first study to focus on the role of frontline employees' emotional labor in robot service failure contexts, which not only enriches and expands the relevant literature in this domain, but also deepens the understanding of how emotional labor and responsibility attribution effect the customer satisfaction.
Details
Keywords
Fusheng Xie, Ling Gao and Peiyu Xie
This paper examines the different features of China's economic development in different stages of economic globalization. The study finds that the investment- and export-based…
Abstract
Purpose
This paper examines the different features of China's economic development in different stages of economic globalization. The study finds that the investment- and export-based growth model drove China's high-speed economic growth between 2000 and 2007, which came into existence around 2000 when China plugged into the global production network.
Design/methodology/approach
This paper also finds that China slowed down to the New Normal because of the disruption to the socio-economic underpinnings of this growth model. As China adapts to and steers the New Normal, supply-side structural reforms can channel excess capacity to the construction of underground pipe networks in rural areas of central China and fix capital while advance rural revitalization.
Findings
At the same time, enterprises must strive to build a key component development platform for key component innovation and the standard-setting power in global manufacturing.
Originality/value
The establishment of a domestic production network integrating the integrated innovation-driven core enterprises and modular producers at different levels can satisfy the dynamic demand structure of China in which standardized demands and personalized demands coexist.
Details
Keywords
Yanfu Wang, Xin Wang and Lifei Liu
Lapping is a vital flattening process to improve the quality of processed semiconductor wafers such as single-crystal sapphire wafers. This study aims to optimise the lapping…
Abstract
Purpose
Lapping is a vital flattening process to improve the quality of processed semiconductor wafers such as single-crystal sapphire wafers. This study aims to optimise the lapping process of the fixed-abrasive lapping plate of sapphire wafers with good overall performance [i.e. high material removal rate (MRR), small surface roughness (Ra) of the wafers after lapping and small lapping plate wear ratio (η)].
Design/methodology/approach
The influence of process parameters such as lapping time, abrasive size, abrasive concentration, lapping pressure and lapping speed on MRR, Ra and η of lapping-processed sapphire wafers was studied, and the results were combined with experimental data to establish a regression model. The multi-evaluation index optimisation problem was transformed into a single-index optimisation problem via an entropy method and the grey relational analysis (GRA) to comprehensively evaluate the performance of each parameter.
Findings
The results revealed that lapping time, abrasive size, abrasive concentration, lapping pressure and lapping speed had different influence degrees on MRR, Ra and η. Among these parameters, lapping time, lapping speed and abrasive size had the most significant effects on MRR, Ra and η, and the established regression equations predicted the response values of MRR, Ra and η to be 99.56%, 99.51% and 93.88% and the relative errors between the predicted and actual measured values were <12%, respectively. With increased lapping time, MRR, Ra and η gradually decreased. With increased abrasive size, MRR increased nearly linearly, whereas Ra and η initially decreased but subsequently increased. With an increase in abrasive concentration, MRR, Ra and η initially increased but subsequently decreased. With increased lapping pressure, MRR and η increased nearly linearly and continuously, whereas Ra decreased nearly linearly and continuously. With increased lapping speed, Ra initially decreased sharply but subsequently increased gradually, whereas η initially increased sharply but subsequently decreased gradually; however, the change in MRR was not significant. Comparing the optimised results obtained via the analysis of influence law, the parameters optimised via the entropy method and GRA were used to obtain sapphire wafers lapping with an MRR of 4.26 µm/min, Ra of 0.141 µm and η of 25.08, and the lapping effect was significantly improved.
Originality/value
Therefore, GRA can provide new ideas for ultra-precision processing and process optimisation of semiconductor materials such as sapphire wafers.