Search results

In an integrated circuit (IC) substrate, more fillers, including talcum powder and aluminium hydroxide, are added, which leads to much higher rigidity and hardness compared with a traditional printed circuit board. However, the micro drilling of IC substrates is harder. This paper aims to test the drilling process of IC substrates to improve the drilling process and the micro hole quality.

Substrate drilling by a micro drill with 0.11-mm diameter was used under several drilling conditions. The influence of drilling conditions on the drilling process was observed. Drilling forces, drill wear and micro hole quality were also studied.

The deformation circle around holes, hole location accuracy, bugle hole and burrs were the major defects of micro holes that were observed during the drilling of the substrate. Reducing the drilling force and drill wear was the effective way to improve hole quality.

The technology and manufacturing of IC substrates has been little investigated. Research data on drilling IC substrates is lacking. The micro hole quality directly affects the reliability of IC substrates. Thus, improving the drilling technology of IC substrates is very important.

Due to the increasing size and complexity of construction projects, construction engineering and management involves the coordination of many complex and dynamic processes and relies on the analysis of uncertain, imprecise and incomplete information, including subjective and linguistically expressed information. Various modelling and computing techniques have been used by construction researchers and applied to practical construction problems in order to overcome these challenges, including fuzzy hybrid techniques. Fuzzy hybrid techniques combine the human-like reasoning capabilities of fuzzy logic with the capabilities of other techniques, such as optimization, machine learning, multi-criteria decision-making (MCDM) and simulation, to capitalise on their strengths and overcome their limitations. Based on a review of construction literature, this chapter identifies the most common types of fuzzy hybrid techniques applied to construction problems and reviews selected papers in each category of fuzzy hybrid technique to illustrate their capabilities for addressing construction challenges. Finally, this chapter discusses areas for future development of fuzzy hybrid techniques that will increase their capabilities for solving construction-related problems. The contributions of this chapter are threefold: (1) the limitations of some standard techniques for solving construction problems are discussed, as are the ways that fuzzy methods have been hybridized with these techniques in order to address their limitations; (2) a review of existing applications of fuzzy hybrid techniques in construction is provided in order to illustrate the capabilities of these techniques for solving a variety of construction problems and (3) potential improvements in each category of fuzzy hybrid technique in construction are provided, as areas for future research.

The purpose of this investigation was to synthesize a doped polyaniline‐containing coating and investigate the anti‐corrosion properties of the coating on Mg‐Li alloy.

The doped polyaniline pigments were prepared by two different methods using ammonium persulphate as oxidant and hydrochloric acid, phosphoric acid, p‐toluene sulfonic acid and sulfosalicylic acid as doping agents. The doped polyaniline was characterized by Fourier transform infrared (FT‐IR) analysis, X‐ray diffraction (XRD) and scanning electron microscopy (SEM). The coatings consisted of polyaniline, epoxy resin and other additives that were formed on Mg‐Li alloy. The anti‐corrosion properties of the polyaniline‐containing coating on the Mg‐Li alloy were investigated in 3.5 wt.% NaCl solution using open circuit potential logging and electrochemical impedance spectroscopy.

The results of the electrochemical tests indicated that the polyaniline‐containing coatings showed better anti‐corrosion properties, as compared to conventional epoxy coatings on Mg‐Li alloy when exposed in 3.5 wt.% NaCl solution. The coating containing 2 wt.% polyaniline (relative to the mass of epoxy resin) doped with hydrochloric acid had the best anti‐corrosion properties on the Mg‐Li alloy.

Previous reports on the anti‐corrosion properties of polyaniline‐containing coatings focused mainly on the surface of iron, steel, aluminum and magnesium, and there have been few studies on the anti‐corrosion properties as protective coatings for Mg‐Li alloy.

Although numerous signal modalities are available for emotion recognition, audio and visual modalities are the most common and predominant forms for human beings to express their emotional states in daily communication. Therefore, how to achieve automatic and accurate audiovisual emotion recognition is significantly important for developing engaging and empathetic human–computer interaction environment. However, two major challenges exist in the field of audiovisual emotion recognition: (1) how to effectively capture representations of each single modality and eliminate redundant features and (2) how to efficiently integrate information from these two modalities to generate discriminative representations.

A novel key-frame extraction-based attention fusion network (KE-AFN) is proposed for audiovisual emotion recognition. KE-AFN attempts to integrate key-frame extraction with multimodal interaction and fusion to enhance audiovisual representations and reduce redundant computation, filling the research gaps of existing approaches. Specifically, the local maximum–based content analysis is designed to extract key-frames from videos for the purpose of eliminating data redundancy. Two modules, including “Multi-head Attention-based Intra-modality Interaction Module” and “Multi-head Attention-based Cross-modality Interaction Module”, are proposed to mine and capture intra- and cross-modality interactions for further reducing data redundancy and producing more powerful multimodal representations.

Extensive experiments on two benchmark datasets (i.e. RAVDESS and CMU-MOSEI) demonstrate the effectiveness and rationality of KE-AFN. Specifically, (1) KE-AFN is superior to state-of-the-art baselines for audiovisual emotion recognition. (2) Exploring the supplementary and complementary information of different modalities can provide more emotional clues for better emotion recognition. (3) The proposed key-frame extraction strategy can enhance the performance by more than 2.79 per cent on accuracy. (4) Both exploring intra- and cross-modality interactions and employing attention-based audiovisual fusion can lead to better prediction performance.

The proposed KE-AFN can support the development of engaging and empathetic human–computer interaction environment.

It is found that previous studies only focus on how digital transformation contributes to individual firms’ green innovation performance while ignoring the important role that it plays in the spillover and diffusion of green innovations among peer firms. Therefore, this study aims to investigate the influence of focal firms’ digital transformation on the spillover of green innovation among peer firms in heavily polluting industries mediated by environmental, social and governance (ESG) performance and agency conflict. Further, this study is also expected to explore the effects of digital transformation’s green innovation spillover.

This study chooses 6,438 A-share heavily polluting listed firms in the stock exchanges based in Shanghai and Shenzhen in China during 2010–2020 as samples and tests the hypothesis with ordinary least squares (OLS) regression. Results prove to be robust to a battery of robustness analyses the authors performed to take care of endogeneity.

The results show that the focal firm’s digital transformation may trigger their peer firms’ green innovation spillover and prompt them to engage in green innovation activities actively. The mechanism test shows that peer firms’ ESG performance and agency conflict mediate the influence path between digital transformation and peer firms’ green innovation spillover. Finally, among heavily polluting firms with high industry competition and large scale, digital transformation’s green innovation spillover effects are more significant in conventional energy-based source control, end-of-pipe treatment and substantive green innovation.

This study is possible to provide a potential driving mechanism of green innovation spillovers. The findings lay a sound foundation for future research, providing important theoretical support and practical insights for digital transformation to empower heavily polluting industries to achieve green transformation and low-carbon development.

The purpose of this paper is to investigate remanufacturing operational strategies considering uncertain quality of end-of-life (EOL) products and differential consumers’ willingness-to-pay (WTP) for new products and provide suggestions on the remanufacturing mode selection for the original equipment manufacturer (OEM).

This study considers three remanufacturing modes, i.e. in-house, outsourcing and authorization modes. By establishing and comparing decision models of three modes from the perspectives of profit, consumer surplus and environment, the optimal remanufacturing mode is discussed.

The results suggest that if the OEM’s remanufacturing capability is high, the in-house mode brings to the highest environmental performance, OEM’s profit and consumer surplus. Otherwise, the outsourcing mode (authorization) is the best benefit to environment (consumers if the unit production cost of new products is not too high). As for the preference of two decision-makers to outsourcing and authorization modes, if the difference of consumers’ WTP for new products is low, the OEM prefers the outsourcing mode; otherwise, the OEM prefers the authorization mode. The preference of the third-party remanufacturer (TPR) to remanufacturing mode is affected by consumers’ WTP for remanufactured products, WTP difference for new products and remanufacturing quality level standard.

These results can provide operational insights into how to select remanufacturing mode when the quality of EOL products is uncertain and consumers’ WTP for new products is different under three remanufacturing modes.

This paper is among the first to investigate the joint effects of EOL products’ uncertain quality and differential consumers’ WTP for new products on the operational strategies and performance under different remanufacturing modes.

This study aims to clarify the impact of agriculture–tourism integration (ATI) on in situ urbanization (ISURB) of rural residents, to highlight the role of industrial integration in the process of China's ISURB and to provide industrial integration suggestions for promoting urbanization quality in Chinese counties.

By sorting out the panel data of China's 1868 counties, the evaluation index system of ISURB was constructed. Difference in difference (DID) and spatial Durbin-difference in difference (SDM-DID) model is used for estimate the relationship between ATI and ISURB.

First, ATI can improve ISURB by 11.4% higher than other regions. Second, theoretical analysis model of ATI on ISURB is constructed from four aspects of “drive–push–pull–block.” The results show that ATI can promote ISURB by increasing upgrading of rural industries, rural employment demand and income capacity, whereas ATI may inhibit ISURB by reducing farmland. Third, considering changes in institutional, hard and soft factors, rural collective economy, information infrastructure and digital finance all promote positive impact of ATI on ISURB. Fourth, ATI will produce spillover effects on ISURB in neighboring regions, which is more pronounced in the central and western regions.

This study lacks quantification of ATI, so future studies are encouraged to further quantify ATI at the county level.

This study has policy significance for constructing ATI demonstration counties and promoting ISURB in China's counties.

It is of great practical value to promote China's ISURB. By stimulating ATI, it can improve income and employment capacity of rural residents and stimulate ISURB of China.

This study enriches the theoretical and practical research on industrial integration behaviors during the process of ISURB.

1. Use county data to measure in situ urbanization (ISURB)

2. Agriculture–tourism integration (ATI) can increase ISURB

3. Constructs a “drive-push-pull-block” model to explain the influence mechanism

4. Use spatial Durbin-difference in difference (SDM-DID) models

5. Consider collective economy, rural information infrastructure and digital finance

Use county data to measure in situ urbanization (ISURB)

Agriculture–tourism integration (ATI) can increase ISURB

Constructs a “drive-push-pull-block” model to explain the influence mechanism

Use spatial Durbin-difference in difference (SDM-DID) models

Consider collective economy, rural information infrastructure and digital finance

Emerging evidence regarding crowdfunding challenges long-standing “gender gap” views of traditional entrepreneurial financing and indicates that female entrepreneurs may have an advantage in crowdfunding. Yet, the literature primarily focuses on influences at the individual level, largely overlooking the interaction between gender and higher-level culture. Drawing on Hofstede's cultural dimensions, this paper aims to investigate the associations among entrepreneurs' gender, culture and crowdfunding performance, particularly in how entrepreneurs' gender and culture interact to affect crowdfunding performance.

Leveraging a sample of 21,730 Kickstarter crowdfunding campaigns and combining these data with data from Hofstede's study, the World Bank (WB) and the International Telecommunication Union (ITU), this study applies multilevel models to empirically investigate this question across 22 countries/regions.

This study confirms that the advantageous effect, that female entrepreneurs are likely to obtain better fundraising performance over their male counterparts, does exist in crowdfunding. Furthermore, the findings reveal that this advantageous effect of female entrepreneurs on crowdfunding performance would be reinforced when cultures of individualism and indulgence are high and culture of long-term orientation is low.

This study contributes to the literature on gender gaps in crowdfunding and entrepreneurial financing by adding an important culture-related boundary condition to the gender preference reported in earlier crowdfunding work. Moreover, the paper extends the knowledge about the impact of culture on crowdfunding performance and enlightens future research on leveraging multilevel modeling approach to examine the complex interplay between individuals and situations in crowdfunding.