Search results

The purpose of this paper is to investigate the decomposition behavior of binary mixtures of organic activators commonly used in the no-clean wave flux systems upon their exposure to thermal treatments simulating wave soldering temperatures. The binary blends of activators were studied at varying ratios between the components.

Differential scanning calorimetry and thermogravimetric analysis were used to study the characteristics of weak organic acid (WOA) mixtures degradation as a function of temperature. The amount of residue left on the surface after the heat treatments was estimated by gravimetric measurements as a function of binary mixture type, temperature and exposure time. Ion chromatography analysis was used for understanding the relative difference between decomposition of activators in binary blends. The aggressivity of the left residue was assessed using the acidity indication gel test, and effect on reliability was investigated by DC leakage current measurement performed under varying humidity and potential bias conditions.

The results show that the typical range of temperatures experienced by electronics during the wave soldering process is not sufficient for the removal of significant activator amounts. If the residues contain binary mixture of WOAs, the final ratio between the components, the residue level and the corrosive effects depend on the relative decomposition behavior of individual components. Among the WOA investigated under the conventional wave soldering temperature, the evaporation and removal of succinic acid is more dominant compared to adipic and glutaric acids.

The findings are attributed to the chemistry of WOAs typically used as flux activators for wave soldering purposes. The results show the importance of controlling the WOA content and ratio between activating components in a flux formulation in relation to its tendencies for evaporation during soldering and the impact of its residues on electronics reliability.

The results show that the significant levels of flux residues can only be removed at significantly higher temperatures and longer exposure times compared to the conventional temperature range used for the wave soldering process. The potential corrosion issues related to insufficient flux residues removal will be determined by the residue amount, its composition and ratio between organic components. The proper time of thermal treatment and careful choice of fluxing formulation could ensure more climatically reliable product.

The aim of this work is to investigate the decomposition behaviour of the activator species commonly used in the wave solder no-clean flux systems and to estimate the residue amount left after subjecting the samples to simulated wave soldering conditions.

Changes in the chemical structure of the activators were studied using Fourier transform infrared spectroscopy technique and were correlated to the exposure temperatures within the range of wave soldering process. The amount of residue left on the surface was estimated using standardized acid-base titration method as a function of temperature, time of exposure and the substrate material used.

The study shows that there is a possibility of anhydride-like species formation during the thermal treatment of fluxes containing weak organic acids (WOAs) as activators (succinic and DL-malic). The decomposition patterns of solder flux activators depend on their chemical nature, time of heat exposure and substrate materials. Evaporation of the residue from the surface of different materials (laminate with solder mask, copper surface or glass surface) was found to be more pronounced for succinic-based solutions at highest test temperatures than for adipic acid. Less left residue was found on the laminate surface with solder mask (∼5-20 per cent of initial amount at 350°C) and poorest acid evaporation was noted for glass substrates (∼15-90 per cent).

The findings are attributed to the chemistry of WOAs typically used as solder flux activators. The results show the importance WOA type in relation to its melting/boiling points and the impact on the residual amount of contamination left after soldering process.

The results show that the evaporation of the flux residues takes place only at significantly high temperatures and longer exposure times are needed compared to the temperature range used for the wave soldering process. The extended time of thermal treatment and careful choice of fluxing technology would ensure obtaining more climatically reliable product.