Junye Wang and Geoffrey H. Priestman
The purpose of this paper is to simulate the behaviour of the symmetrical turn‐up vortex amplifier (STuVA) to obtain insight into its maximum through‐flow operation within the…
Abstract
Purpose
The purpose of this paper is to simulate the behaviour of the symmetrical turn‐up vortex amplifier (STuVA) to obtain insight into its maximum through‐flow operation within the eight‐port STuVA, and understand the relation between its design parameters and flow characteristics. Furthermore, it is to test the performance of different turbulent models and near‐wall models using the same grid, the same numerical methods and the same computational fluid dynamics code under multiple impingement conditions.
Design/methodology/approach
Three turbulence models, the standard k‐ε, the renormalization group (RNG) k‐ε model and the Reynolds stress model (RSM), and three near‐wall models have been used to simulate the confined incompressible turbulent flow in an eight‐port STuVA using unstructured meshes. The STuVA is a special symmetrical design of turn‐up vortex amplifier, and the simulation focused on its extreme operation in the maximum flow state with no swirling. The predictions were compared with basic pressure‐drop flow rate measurements made using air at ambient conditions. The effect of different combinations of turbulence and near‐wall models was evaluated.
Findings
The RSM gave predictions slightly closer to the experimental data than the other models, although the RNG k‐ε model predicted nearly as accurately as the RSM. They both improved errors by about 3 per cent compared to the standard k‐ε model but took a long time for convergence. The modelling of complex flows depends not only on the turbulence model but also on the near‐wall treatments and computational economy. In this study a good combination was the RSM, the two layer wall model and the higher order discretization scheme, which improved accuracy by more than 10 per cent compared to the standard k‐ε model, the standard wall function and first order upwind.
Research limitation/implications
The results of this paper are valid for the global pressure drop flow rate. It should be desirable to compare some local information with the experiment.
Originality/value
This paper provides insight into the maximum through‐flow operation within the eight‐port STuVA to understand the relation between its design parameters and flow characteristics and study the performance of turbulence and near wall models.
Details
Keywords
Junye Wang, Xiaoxian Zhang, Anthony G. Bengough and John W. Crawford
The cell‐based method of domain decomposition was first introduced for complex 3D geometries. To further assess the method, the aim is to carry out flow simulation in rectangular…
Abstract
Purpose
The cell‐based method of domain decomposition was first introduced for complex 3D geometries. To further assess the method, the aim is to carry out flow simulation in rectangular ducts to compare the known analytical solutions.
Design/methodology/approach
The method is not based on equal subvolumes but on equal numbers of active cells. The variables of the simulation are stored in ordered 1D arrays to replace the conventional 3D arrays, and the domain decomposition of the complex 3D problems therefore becomes 1D. Finally, the 3D results can be recovered using a coordinate matrix. Through the flow simulation in the rectangular ducts how the algorithm of the domain decompositions works was illustrated clearly, and the numerical solution was compared with the exact solutions.
Findings
The cell‐based method can find the subdomain interfaces successfully. The parallelization based on the algorithm does not cause additional errors. The numerical results agree well with the exact solutions. Furthermore, the results of the parallelization show again that domains of 3D geometries can be decomposed automatically without inducing load imbalances.
Practical implications
Although, the approach is illustrated with lattice Boltzmann method, it is also applicable to other numerical methods in fluid dynamics and molecular dynamics.
Originality/value
Unlike the existing methods, the cell‐based method performs the load balance first based on the total number of fluid cells and then decomposes the domain into a number of groups (or subdomains). Thus, the task of the cell‐based method is to recover the interface rather than to balance the load as in the traditional methods. This work has examined the celled‐based method for the flow in rectangular ducts. The benchmark test confirms that the cell‐based domain decomposition is reliable and convenient in comparison with the well‐known exact solutions.
Details
Keywords
Junye Wang, Geoffrey H. Priestman and John R. Tippetts
Seeks to examine the performance of conventional turbulence models modelling strongly swirling flows within a Symmetrical Turn up Vortex Amplifier, with adjustment of the…
Abstract
Purpose
Seeks to examine the performance of conventional turbulence models modelling strongly swirling flows within a Symmetrical Turn up Vortex Amplifier, with adjustment of the turbulence model constants to improve agreement with experimental data.
Design/methodology/approach
First, the standard k‐ε model and the Reynolds Stress Model (RSM) were used with standard values of model constants, using both the first order upwind and the quadratic upstream interpolation for convective kinetics (QUICK) schemes. Then, the swirling effect was corrected by adjusting the model coefficients.
Findings
The standard RSM with the QUICK did produce better predictions but still significantly overestimated the experimental data. Much improved simulation was obtained with the systematic adjustment of the model constants in the standard k‐ε model using the QUICK. The physical significance of the model constants accounted for changes of the eddy viscosity, and the production and destruction of k and ε.
Research limitations/implications
More industrial cases could benefit from this simple and useful approach.
Originality/value
The constant adjustment is regular and directed, based on the eddy viscosity and the production and destruction of k and ε. The regularity of the effect of the model constants on the solutions makes it easier to quickly adjust them for other industrial applications.
Details
Keywords
Anthony Bagherian, Mark Gershon and Sunil Kumar
The effectiveness of Six Sigma programs has varied across different industries and organizations, and leadership styles have been identified as a critical success factor for the…
Abstract
Purpose
The effectiveness of Six Sigma programs has varied across different industries and organizations, and leadership styles have been identified as a critical success factor for the installation of Six Sigma initiatives. Therefore, this study aims to investigate the specific elements of leadership styles that are linked with the successful deployment of Six Sigma programs in the automobile industry.
Design/methodology/approach
To conduct the study, the researchers utilized a Likert scale questionnaire with a rating system of 1–7 and a simple random sampling method. The survey was distributed to 2,325 potential participants, with 573 responses received, mostly from Germany, the United Kingdom and Sweden. Out of those responses, 260 completed questionnaires were received. The study utilized a mixed-methods research design and exploratory research approaches to investigate the implication of leadership style on the success of Six Sigma implementation. The research employed several analysis techniques, including Structural Equation Modeling (SEM), exploratory factor analysis (EFA), confirmatory factor analysis (CFA) and Survey methods.
Findings
Through various SEM methods, such as EFA and CFA, the study revealed two vital leadership elements: (1) the long-term success of Six Sigma depends on leadership’s support and recognition of it as an improvement strategy and (2) leadership must commit to the organization’s suppliers to ensure quality and the provision of defect-free products.
Practical implications
By incorporating the identified key elements of leadership into their strategies, organizations and researchers can ensure the sustainable implementation of Six Sigma.
Originality/value
This research presents a distinct contribution to the evaluation of leadership style components within the European automotive sector, utilizing a mixed-methods research design and incorporating a variety of descriptive statistics.
Details
Keywords
Bakhtiyar Khudayarov and Fozilzhon Turaev
The purpose of this study is to create a mathematical model, a numerical algorithm and a computer program for studying the vibration of composite pipelines based on the theory of…
Abstract
Purpose
The purpose of this study is to create a mathematical model, a numerical algorithm and a computer program for studying the vibration of composite pipelines based on the theory of beams used in the oil and gas industry, agriculture and water management, housing and communal services and other areas.
Design/methodology/approach
A mathematical model of vibration of a viscoelastic pipeline based on the theory of beams with a pulsating fluid flowing through it was developed. Using the Bubnov-Galerkin method, based on the polynomial approximation of deflections, the problem is reduced to the study of systems of ordinary integro-differential equations, the solution of which is found by a numerical method. A computational algorithm was developed for solving problems of vibrations of composite pipelines conveying pulsating liquid.
Findings
The stability and amplitude-time characteristics of vibration of composite pipelines with a pulsating fluid flowing in it are studied for wide range of changes in the parameters of deformable systems and fluid flow. The critical velocities of fluid flow at which the viscoelastic pipe loses its rectilinear equilibrium shape are found. The effect of singularity in the kernels of heredity on the vibrations of structures with viscoelastic properties was numerically studied. It is shown that with an increase in the viscosity parameter of the pipeline material, the critical flow velocity decreases. It was determined that an increase in the value of the fluid pulsation frequency and the excitation coefficient leads to a decrease in the critical velocity of the fluid flow. It was established that an increase in the parameters of the Winkler foundation and the rigidity parameter of the continuous layer leads to an increase in the critical flow velocity.
Originality/value
The study of the vibration of pipelines made of composite materials is of great theoretical and applied interest. The solution to this problem is an effective application of the theory of viscoelasticity to real processes. Therefore, the methods and problems of pipeline vibrations attract much attention from researchers. This study is devoted to solving the above problems and therefore its subject is relevant. The paper considers the results of numerical simulation of the processes of vibration of a composite pipeline based on the theory of shells during the flow of a pulsating liquid through it. A mathematical model of vibration of a composite pipeline was developed. A computational algorithm was developed for solving problems of vibrations of composite pipelines conveying pulsating liquid.
Details
Keywords
The rail transport sector in China represents one of the largest consumers of energy today, and the primary purpose of this paper is to examine the causes of changes in energy…
Abstract
Purpose
The rail transport sector in China represents one of the largest consumers of energy today, and the primary purpose of this paper is to examine the causes of changes in energy consumption of Chinese national rail transport (ECCNRT).
Design/methodology/approach
For this study, reasonable indicators as factors that affected conversion volume (CV) and unit energy consumption (UEC) based on statistical data from 1990 to 2010 were selected. CV and UEC models were established by regression analysis and tested using real data of 2011-2014. The CV model indicates it has an exponential relationship with GDP. Besides, there is a quantitative relationship between UEC and the quantity of locomotives. The ECCNRT calculation model was proposed and ECCNRT model data were compared with the real data. Impacts of different factors on ECCNRT were analyzed with economic principles.
Findings
The analysis conducted shows that the calculation model can reflect variation of ECCNRT precisely, and ECCNRT has a quantitative relation with GDP and quantities of locomotives. GDP accounts for changes of ECCNRT 20.02 per cent, while those for quantity of diesel locomotives and electric locomotives are 26.87 and 53.11 per cent, respectively. The number of electric locomotives is the main factor that influences variation of ECCNRT.
Originality/value
Through regression analysis, this study discovered the inner quantitative relationship between the conversion volume (important index of Chinese national rail transport production) and GDP. In addition, this study establishes the ECCNRT model according to the Chinese national rail transport data, which can be used to calculate the amount of ECCNRT and conduct quantitative analysis for different impacts of various factors on ECCNRT’s changes.