Terence Y.M. Lam and Junjie Yan
Shanghai is currently faced with a rapid increase in the ageing population and demand for elderly homes. Continuing care retirement community (CCRC) has been emerging as a…
Abstract
Purpose
Shanghai is currently faced with a rapid increase in the ageing population and demand for elderly homes. Continuing care retirement community (CCRC) has been emerging as a high-end alternative to offer specialised accommodation to the elderly in major cities. Since the first development in 2008, the industry is now still at the infancy stage. This study aims to examine the investment barriers hindering the supply and demand of CCRCs with an aim to recommend practical and senior housing policy measures to facilitate CCRC developments.
Design/methodology/approach
Multiple-case study method was used to confirm whether the literature findings on investment barriers apply to the context of Shanghai. Four representative CCRC development cases in Shanghai were examined, in which qualitative data were collected from interviews with experienced CCRC development managers and quantitative data from a questionnaire survey of the CCRC residents.
Findings
Operation management experience, financial risks and government support policy were found to be the main supply barriers. Chinese traditional family-oriented culture and affordability were not the main demand barriers of CCRCs in Shanghai. Poor quality of services and living environment were identified as the main barriers suppressing the demand for CCRC.
Research limitations/implications
Although common trends and views can be drawn from the representative cases in Shanghai to provide valid results, further research should be conducted on other major cities in China so that the results can be widely applied.
Practical implications
Successful CCRC investment strategy should focus on partnering with experienced professional eldercare management companies, provisions of high-quality medical professionals and trained care personnel and delivery of flexible care service, along with intensive capital flows for land, construction and operating costs.
Social implications
Additional senior housing policy support should be established to promote the CCRC supply to address the ageing needs, particularly granting lands for CCRC developments at Tiers 1 and 2 major cities where the land cost is high.
Originality/value
This research’s practical and policy measures can be applied to enable and promote CCRC developments in Shanghai, thus benefitting both housing investors and the government. The findings also form a baseline for CCRC developments in other major cities.
Details
Keywords
Qingyu Shi, Jingyu Yu, Lifei Zhang, Jingfeng Wang and Guowei Cheng
The construction industry has experienced an irreversible digital transformation to smart construction. Many countries have published supporting policies to encourage the…
Abstract
Purpose
The construction industry has experienced an irreversible digital transformation to smart construction. Many countries have published supporting policies to encourage the development of smart construction. However, there is no universally valid approach. This paper thus aims to evaluate smart construction policies issued by 24 pilot cities in China and identify applicable policy tools and their impact.
Design/methodology/approach
This paper collected 33 governmental documents on smart construction through the official websites in China. Different policy tools were classified into supply-side, demand-side and environment-side categories. The supporting policies of smart construction development in pilot cities were quantitatively evaluated by using a policy modeling consistency index (PMC-index) model.
Findings
Supply-type and environment-type policy instruments were used more frequently than demand-type policies in 24 pilot cities. Most of the 24 pilot cities had an evaluation of PMC-index over 8, realizing the consistency of smart construction policies. Eight pilot cities had an evaluation of PMC-index of 6–7.99, realizing acceptable consistency. Only Foshan City has an evaluation of PMC-index below 4, which may reflect a poor consistency of policy implementation. The paper proposes consistencies of smart construction policies of 24 pilot cities and valid policy instruments, including the presale of commercial residential buildings, additional bonus points in the tendering process and cooperating with multiple departments when promoting smart construction.
Originality/value
This paper contributes to expanding policy evaluation studies in the smart construction field and provides concrete suggestions for policymakers to formulate more effective and specific policies and strategies for the development of smart construction.
Details
Keywords
Junjie Zhang, Xianyi Zeng, Kaixuan Liu, Hong Yan and Min Dong
The purpose of this paper is to set up a women’s jeans knowledge base between consumer profile and jeans profile. The result of study could be applied to jeans recommendation…
Abstract
Purpose
The purpose of this paper is to set up a women’s jeans knowledge base between consumer profile and jeans profile. The result of study could be applied to jeans recommendation system for a special consumer.
Design/methodology/approach
Women’s jeans are chosen as research objects. The sensory evaluation technology and intelligent data fusion methods are applied in this research.
Findings
Eight pairs of words were selected to set up normalized sensory evaluation criteria in the study for describing both consumers’ expectations and products. The relation between consumer profile and jeans profile could be quantified according to the principle of sensory evaluation technology.
Practical implications
Four experiments are designed for setting up this knowledge base by sensory evaluation technology, and set up the women’s jeans knowledge base by intelligent data fusion methods.
Originality/value
The theory of sensory evaluation technology is applied for building women’s jeans knowledge base that can be used for consumer-oriented intelligent garment recommendation system.
Details
Keywords
Baiping Yan, Dazhuo Huang, Junjie Hong and Chengming Zhang
This paper aims to present the design and fabrication of a rotary magnetostrictive energy generator, using to harvest the rotation energy of human knee joint.
Abstract
Purpose
This paper aims to present the design and fabrication of a rotary magnetostrictive energy generator, using to harvest the rotation energy of human knee joint.
Design/methodology/approach
A rotary magnetostrictive energy generator is presented in this paper. The harvester consists of six movable flat Terfenol-D rods, surround by the picked-up coils respective, and alternate permanent magnet (PM) array fixed in the upper cover of the stator. The harvester rotates like as a stepper motor, which has rotary electromagnetic power generating effect and impacted magnetostrictive power generating effect in its rotation. Modeling and simulation are used to validate the concept. A prototype of harvester is fabricated and subjected to the experimental characterization.
Findings
The size of proposed structure is control as 77 cm3, and its mass is about 0.21 kg. Huge induced voltage generated in the short-time impact situation, and that induced voltage in the harvester can up to 18.6 V at 0.32 s stepper rotation. Also, the presented harvester has good harvesting effects at low frequency human walking situation, which is suitable to be used for future researches of wearable knee joint applications.
Originality/value
A new concept of magnetostrictive harvester is presneted, which will be benefit for the application of human knee joint wearable. Also, this concept will give us more idea for collection of human movement energy.
Details
Keywords
Kaixuan Liu, Jianping Wang, Chun Zhu, Edwin Kamalha, Yan Hong, Junjie Zhang and Min Dong
The purpose of this paper is to propose a relatively simple and rapid method to create a digital human model (DHM) to serve clothing industry.
Abstract
Purpose
The purpose of this paper is to propose a relatively simple and rapid method to create a digital human model (DHM) to serve clothing industry.
Design/methodology/approach
Human body’s point cloud is divided into hands, foots, head and torso. Then forward modeling method is used to model hands and foots, photo modeling method is used to model head and reverse modeling method is used to model torso. After that, hands, foots, head and torso are integrated together to get a static avatar. Next, virtual skeleton is bound to the avatar. Finally, a lifelike digital human body model is created by the mixed modeling method (MMM).
Findings
In allusion to the defect of the three-dimension original data of human body, this paper presented an MMM, with which we can get a realistic digital human body model with accurate body dimensions. The DHM can well meet the needs of fashion industry.
Practical implications
The DHM, which is got by the MMM, can be well applied in the field of virtual try on, virtual fashion design, virtual fashion show and so on.
Originality/value
The originality of the paper lies in the integration of forward modeling, reverse modeling and photo modeling to present a novel method of human body modeling.
Details
Keywords
Xingchen Yan, Kexin Xu, Junjie Wang, Xicheng Wei and Wurong Wang
The purpose of this paper is to comparatively investigate the microstructure and interfacial intermetallic compound (IMC) layer of Cu/SACPG/Ni and Cu/SAC0307/Ni solder joints…
Abstract
Purpose
The purpose of this paper is to comparatively investigate the microstructure and interfacial intermetallic compound (IMC) layer of Cu/SACPG/Ni and Cu/SAC0307/Ni solder joints after thermal aging.
Design/methodology/approach
The specimens were thermally aged at 150°C for 0, 24, 168 and 500 h. The microstructure and morphology of the interface IMC layer were observed by means of scanning electron microscope. The IMCs and the solder bump surface were analyzed by EDS. Moreover, the thickness of IMC layer was measured by using the image analysis software.
Findings
The morphology of IMC of Cu/SAC0307/Ni solder joint was consistent with that of the Cu/SACPG/Ni joint, which indicates that the addition of P and Ge had little effect on the IMC formation. The needle-like (Cu,Ni)6Sn5 was formed at the interface of solder/Ni solder joints. Meanwhile, the tiny particles inferred as Ag3Sn phase attached to the surface of (Cu,Ni)6Sn5. The growth rate of IMC layer of the Cu/SACPG/Ni joint was smaller than that of Cu/SAC0307/Ni joint with aging time increasing, which means the addition of trace P and Ge can slightly suppress the diffusion rate of the interfacial IMC.
Originality/value
There are no previous studies on the formation mechanism of the IMC layer of SAC0307 solder alloys with P and Ge addition.
Details
Keywords
Iwin Thanakumar Joseph S., Sasikala J. and Sujitha Juliet D.
The purpose of this paper is to study various ship detection methodologies. The accuracy of ship detection using satellite images still suffers from disturbances due to cluttered…
Abstract
Purpose
The purpose of this paper is to study various ship detection methodologies. The accuracy of ship detection using satellite images still suffers from disturbances due to cluttered scenes and varying ship sizes. The suitability of the techniques for various applications is explained in this survey.
Design/methodology/approach
A list of data on the subject was gathered and processed into tables. The test outcomes were then discussed to determine the most effective ship detection technique under various complex environments.
Findings
In this work, the advantages and disadvantages of different classification techniques of ship detection are highlighted. The suitability of the techniques for various applications is also explained in this survey. Several hybrid approaches can be developed in order to increase the accuracy of ship detection system. This survey also aids in highlighting the significant contributions of satellite images to effective ship detection system.
Originality/value
In this paper, studying various ship detection methodologies is given specific attention. A survey on ship detection and recognition is clarified with the detailed comparative analysis of various classifier techniques.
Details
Keywords
Han Zhao, Qingmiao Ding, Yaozhi Li, Yanyu Cui and Junjie Luo
This paper aims to study the influence of microparticles on the surface cavitation behavior of 2Cr3WMoV steel; microparticle suspensions of different concentration, particle size…
Abstract
Purpose
This paper aims to study the influence of microparticles on the surface cavitation behavior of 2Cr3WMoV steel; microparticle suspensions of different concentration, particle size, material and shape were prepared based on ultrasonic vibration cavitation experimental device.
Design/methodology/approach
2Cr3WMoV steel was taken as the research object for ultrasonic cavitation experiment. The morphology, quantity and distribution of cavitation pits were observed and analyzed by metallographic microscope and scanning electron microscope.
Findings
The study findings showed that the surface cavitation process produced pinhole cavitation pits on the surface of 2Cr3WMoV steel. High temperature in the process led to oxidation and carbon precipitation on the material surface, resulting in the “rainbow ring” cavitation morphology. Both the concentration and size of microparticles affected the number of pits on the material surface. When the concentration of microparticles was 1 g/L, the number of pits reached the maximum, and when the size of microparticles was 20 µm, the number of pits reached the minimum. The microparticles of Fe3O4, Al2O3, SiC and SiO2 all increased the number of pits on the surface of 2Cr3WMoV steel. In addition, the distribution of pits of spherical microparticles was more concentrated than that of irregularly shaped microparticles in turbidity.
Originality/value
Most of the current studies have not systematically focused on the effect of each factor of microparticles on the cavitation behavior when they act separately, and the results of the studies are more scattered and varied. At the same time, it has not been found to carry out the study of microparticle cavitation with 2Cr3WMoV steel as the research material, and there is a lack of relevant cavitation morphology and experimental data.
Details
Keywords
Junjie Zhou, Rajiv Kishore, Meiyun Zuo, Ruochen Liao and Xiao Tang
As older adults are increasingly active in virtual communities (VCs), these platforms for knowledge exchange present opportunities for companies to use elder human capital. The…
Abstract
Purpose
As older adults are increasingly active in virtual communities (VCs), these platforms for knowledge exchange present opportunities for companies to use elder human capital. The purpose of this study is to understand the antecedent factors that motivate older adults’ knowledge contribution and knowledge seeking (KS) behaviors in VCs.
Design/methodology/approach
Rooted in socio-emotional selectivity and social cognitive theories, this study included five key variables and developed models for older adults’ knowledge contributing (KC)/KS behaviors. This paper tested the hypotheses using data from a sample of 204 older adults in 3 VCs in China.
Findings
The results provide support for most of the hypotheses and show that while other members’ participation (MP) acts as a substitute for meaning in life and attitude toward aging, it acts as a complement for outcome expectations (OE) focused on others and OE focused on oneself in their impacts on KC/KS activities.
Practical implications
The study provides practical insights for developing elder human resources via VCs to avoid knowledge loss.
Originality/value
This study described older adults’ unique characteristics when modeling their information and communication technologies-related behaviors and built two models to explain their KC/KS behaviors. It confirmed that the same factor has different levels of impact on older adults’ KC/KS behaviors in VCs. In addition, it confirmed and reinforced the complementary and substitutive effects of other MP as an environmental factor on these behaviors.
Details
Keywords
Lili Shang, Junjie Zhou and Meiyun Zuo
Social media greatly enhances public access to health information and thus attracts older adults who tend to attach more importance to their health. This study aims to identify…
Abstract
Purpose
Social media greatly enhances public access to health information and thus attracts older adults who tend to attach more importance to their health. This study aims to identify the factors that contribute to the likelihood of older adults' health information sharing on social media.
Design/methodology/approach
By drawing on health belief (HBM) and elaboration likelihood models (ELM), a novel conceptual model integrating older adults' health belief and information processing is established to uncover the factors. Online survey data from 290 Chinese older adult users of WeChat, the most popular social media platform in China, were collected to test the research model.
Findings
As health belief-related variables, perceived susceptibility is positively associated with health information-sharing intention (HISI), while perceived severity negatively influences HISI, which is contrary to prior findings. For information processing, the positive impacts of argument quality and source credibility on HISI are fully mediated by perceived usefulness.
Originality/value
This study is one of the first studies to explore the initiative use of information and communication technology among older adults. The new theoretical perspective proposed herein considers health belief and information processing perspectives in a complementary manner and can facilitate an overall analysis of the factors influencing older adults' HISI in a social media context. This study also furthers understandings of the ELM and expands the theory of HBM to take the age of decision makers into account.