Ana Condeço-Melhorado, Juan Carlos García-Palomares and Javier Gutiérrez
The COVID-19 pandemic has significantly impacted global tourism, with international travel bearing the burden of restrictions. Domestic tourism has also faced substantial…
Abstract
Purpose
The COVID-19 pandemic has significantly impacted global tourism, with international travel bearing the burden of restrictions. Domestic tourism has also faced substantial challenges. This paper aims to analyse the impact of the COVID-19 pandemic on domestic tourism in Spain, focusing on travel from Madrid (the country’s capital) to other tourist destinations.
Design/methodology/approach
Mobile phone data has been used to study the evolution of tourist trips over the summers of 2019, 2020 and 2021. Regression models are used to explain the number of visitors at destinations.
Findings
The pandemic not only caused a drastic drop in tourist flows but also disrupted the overall pattern of the domestic flow system. Winning destinations were typically areas in proximity to Madrid and less densely populated destinations, while urban destinations were major losers. The preferences of domestic tourists varied notably by income group, but the decrease in trip volumes showed only marginal differences.
Originality/value
The paper demonstrates the potential of mobile phone data analysis to study the uneven impact of external shocks, such as the COVID-19 pandemic, on tourist destinations. This approach considers spatial resilience heterogeneity within regions or provinces. By incorporating income information, the analysis introduces a social dimension to highly detailed spatial data, surpassing traditional studies conducted at the regional or national levels.
研究目的
COVID-19大流行对全球旅游业产生了重大影响,国际旅行受到了限制的影响最为严重。国内旅游也面临着重大挑战。本文分析了COVID-19大流行对西班牙国内旅游的影响,重点关注从马德里(该国首都)到其他旅游目的地的旅行。
研究方法
本研究使用移动电话数据研究了2019年、2020年和2021年夏季旅游出行的演变。采用回归模型解释了各目的地游客数量。
研究发现
大流行不仅导致了旅游流量急剧下降,还扰乱了国内流动系统的总体模式。获胜的目的地通常是马德里附近的地区和人口较稀少的目的地,而城市目的地是主要的输家。国内游客的偏好在收入群体之间有明显差异,但旅行量的减少只显示出边际差异。
研究创新
本文展示了使用移动电话数据分析研究外部冲击(如COVID-19大流行)对旅游目的地的不均匀影响的潜力。该方法考虑了区域或省份内的空间弹性异质性。通过整合收入信息,该分析为高度详细的空间数据引入了社会维度,超越了传统在区域或国家水平进行的研究。
Details
Keywords
Juan Carlos García-Piña Rosete and Rafael Hernandez Barros
The purpose of this research is to highlight the imperative need for an internationally accepted standard for sustainability accounting reporting, not exclusive to the analyzed…
Abstract
Purpose
The purpose of this research is to highlight the imperative need for an internationally accepted standard for sustainability accounting reporting, not exclusive to the analyzed sector but across all industries.
Design/methodology/approach
This paper uses an enhanced analysis of existing empirical literature on accounting reporting for sustainability efforts in corporate practices. The study uses two statistical techniques: multiple linear regression analysis and structural equations modeling, focusing on a sample drawn from the Newsweek Green Rankings within the automobile industry. Specifically, the analysis is conducted on data spanning from 2014 to 2016, covering three years and comprises 25 corporations from the Global Fortune 500 list.
Findings
The empirical analysis reveals a significant gap in sustainable reporting practices, highlighting the challenges of nonstandardized managerial accounting across the globe. This research portrays key benefits including enhanced data accessibility and the adoption of sustainable practices across industries. Furthermore, assisting in academic research.
Research limitations/implications
The study addresses challenges in researching sustainability constraints across various dimensions. The obtained empirical data could inform stakeholders, including accounting setters and managers in the automobile industry, about the pressing need to set uniform sustainability constraints comprehensively and to implement global reporting standards to foster transparency and accountability.
Practical implications
The sustainability accounting setters, such as Sustainability Accounting Standards Board and International Financial Reporting Standards Foundation, face the challenge of adopting globally accepted accounting standards for sustainability reporting. The statistical evidence correlates sustainable variables with three profitability margins (earnings before interest and taxes, earnings before interest taxes, depreciation and amortization and pretax), providing empirical proof of the degree of correlation among them.
Social implications
This paper aims to collaborate with the Meditari Accountancy Research Journal in bridging the gap in international standards for sustainability accounting reporting. It emphasizes the global significance of achieving a standardized approach to reporting for sustainability and its potential positive impact on corporations, governments, academic research teams and society.
Originality/value
Diverse societal stakeholders have advocated for the implementation of a more sustainable world. Currently, there is no international agreement on how to report for sustainability efforts. This paper evidences this gap, which if persistent would not allow for an accurate evaluation of progress and fulfillment of goals, causing a subpar performance without standard measures.
Details
Keywords
Yolitzin Alvarado, Rosenberg Romero, Juan Carlos García, Adrian del Pozo, Roberto Zenit and Sergio Alonso Serna
The purpose of this study is to evaluate the corrosion in CO2 using Rotating cage (RC) and Computational fluid dynamics (CFD) software. RC experiments were carried out in a CO2…
Abstract
Purpose
The purpose of this study is to evaluate the corrosion in CO2 using Rotating cage (RC) and Computational fluid dynamics (CFD) software. RC experiments were carried out in a CO2 environment, to evaluate corrosion in a C-Mn Steel. CFD software was used to simulate RC flow conditions during the corrosion process, to evaluate wall shear stress.
Design/methodology/approach
The RC is used as a laboratory tool for studies of accelerated corrosion, according to standard ASTM G184-06. Steel corrosion was studied by means of the RC methodology. The hydrodynamics are solved numerically using CFD. Numerical calculations were performed on a 2D geometry of 8 coupons JG, for speeds of 460 and 230 rpm. The flow was analyzed with vector graphics and velocity profiles. The numerical calculations were validated with experimental measurements of the velocity field obtained with the technique of Particle Image Velocimetry (PIV).
Findings
Different turbulence models were used, in which CFD simulations were compared with data obtained from PIV. According to this comparison, the best turbulence model was determined.
Originality/value
It was found that experimental flow speeds have closer values with Spalart–Allmaras modeling than K-epsilon and K-kl-omega.
Details
Keywords
Ricardo Aláez‐Aller and Juan Carlos Longás‐García
The purpose of this paper is to provide an explanation and set out the reasons for the change in supply strategy from sole sourcing to split sourcing at an automotive assembly…
Abstract
Purpose
The purpose of this paper is to provide an explanation and set out the reasons for the change in supply strategy from sole sourcing to split sourcing at an automotive assembly plant. In that context, this paper highlights the advantages of split sourcing over earlier strategies.
Design/methodology/approach
The information on which this paper is based comes chiefly from two sets of qualitative interviews staged in 1996 and 2003 at automotive supplier plants in northern Spain. Particular attention is paid to suppliers working with sequenced deliveries located close to the Volkswagen plant in Navarre. The vehicle model manufactured changes between the interviews. A comparison of the two pieces of fieldwork reveals changes in the plant's supply strategy.
Findings
A comparison between the supply strategies of a plant for two successive, distinct models provides empirical support for the idea that supply strategies evolve. The need is also demonstrated for the first time to consider individual plants expressly, since significant cost savings can be made at this level at two key times: when switching models and during model life‐times. These cost savings depend clearly on the type of buyer‐supplier relationship established at plant level.
Practical implications
The most significant conclusion for practitioners concerns the need to design a supply strategy from a dynamic approach that specifically considers the plant level.
Originality/value
The basic contribution of this paper is that it examines changes over time in outsourcing decisions in the automotive industry by incorporating the viewpoint of individual plants. Following this approach, the evolution from sole sourcing to split sourcing is described and interpreted. The paper also stresses the need to analyse procurement strategies in evolutionary terms (i.e. as being reconfigured in line with experience).
Details
Keywords
Boric’s government marks the beginning of a new political cycle, presaging likely party realignments, particularly on the left and in the centre, and the emergence of a new…
Details
DOI: 10.1108/OXAN-DB266916
ISSN: 2633-304X
Keywords
Geographic
Topical
The economy, however, is in dire straits. Widespread shortages of everyday supplies are reminiscent of the crisis that followed collapse of the Soviet Union in the 1990s. Economic…
Details
DOI: 10.1108/OXAN-DB254181
ISSN: 2633-304X
Keywords
Geographic
Topical
Roy Boyd, Maria Eugenia Ibarrarán and Roberto Vélez-Grajales
Fernando E. García-Muiña, Laura Fuentes-Moraleda, Trinidad Vacas-Guerrero and Juan José Rienda-Gómez
The hostile environments in which museums operate force them to be innovative. Most of them have fewer resources and are publicly owned. Because these factors may hinder their…
Abstract
Purpose
The hostile environments in which museums operate force them to be innovative. Most of them have fewer resources and are publicly owned. Because these factors may hinder their innovative potential, this paper aims to propose an open innovation model adapted to this type of organization to improve visitors’ experience.
Design/methodology/approach
A qualitative method based on a thematic analysis is carried out. Data sources are: (i) focus group with stakeholders from the destination and (ii) in-depth interviews with museums experts.
Findings
This new framework is important because it brings something new to a field that previous research had barely considered. The study of the implementation of open innovation in publicly owned small and medium-sized museums brings to light the growing importance of the relational, organizational, technological and experiential dimensions, their interactions and their main constituent factors.
Research limitations/implications
The study is limited to a specific type of institution, and results should not be extrapolated to other contexts. The construct of open innovation is highly complex, and that advises future research to include other players. Quantitative methods and longitudinal techniques will contribute to tackling new challenges in future research works.
Practical implications
Results are helpful for museum managers and policymakers. Stakeholders improve their comprehension of how an open innovation model works because the paper offers a few guidelines for its active designing. A solid networking based on trust and the emphasis on improving the visitor experience determine making-decision processes.
Originality/value
The paper provides a systemic innovation management model for museums, where there is almost no previous research. It is theoretically supported in the open innovation paradigm, as well as the absorptive capacity framework. The emerging and central role of the experiential dimension constitutes another notable contribution to literature.
Details
Keywords
Soraya González-Mendes, Sara Alonso-Muñoz, Fernando E. García-Muiña and Rocío González-Sánchez
This paper aims to provide an overview of the application of blockchain to agri-food supply chains, including key issues and trends. It examines the state of the art and…
Abstract
Purpose
This paper aims to provide an overview of the application of blockchain to agri-food supply chains, including key issues and trends. It examines the state of the art and conceptual structure of the field and proposes an agenda to guide future research.
Design/methodology/approach
This article performs a bibliometric analysis using VOSviewer software on a sample of 205 articles from the WoS database to identify research trend topics.
Findings
The number of publications in this area has increased since 2020, which shows a growing research interest. The research hotspots are related to the integration of blockchain technology in the agri-food supply chain for traceability, coordination between all actors involved, transparency of operations and improvement of food safety. Furthermore, this is linked to sustainability and the achievement of the sustainable development gtoals (SDGs), while addressing key challenges in the implementation of blockchain-based technologies in the agri-food supply chain.
Practical implications
The application of blockchain in the agri-food supply chain may consider four key aspects. Firstly, the implementation of blockchain can improve the traceability of food products. Secondly, this technology supports sustainability issues and could avoid disruptions in the agri-food supply chain. Third, blockchain improves food quality and safety control throughout the supply chain. Fourthly, the findings show that regulation is needed to improve trust between stakeholders.
Originality/value
The paper provides a comprehensive overview of the blockchain phenomenon in the agri-food supply chain by optimising the search criteria. Moreover, it serves to bridge to future research by identifying gaps in the field.
Details
Keywords
Henriette Klavenes, Alicia Orea-Giner, Fernando E. García-Muiña and Laura Fuentes-Moraleda
The purpose of this paper is to examine the effects of the #MeToo movement in the work environment of professional football organizations in Spain. It also explores the current…
Abstract
Purpose
The purpose of this paper is to examine the effects of the #MeToo movement in the work environment of professional football organizations in Spain. It also explores the current situation of the professional career of women working in this industry to know if the opportunities are equal for men and women to reach management or executive positions.
Design/methodology/approach
From a gender approach and considering gender as a social structure (Risman, 2004), the authors are going to analyse men and women’s professional careers in football organizations from a three-dimensional gender perspective (individual, interactional and institutional). The objective is twofold: to know the effect of the #MeToo movement in these organizations; and also to know the opinion of both men and women of these organizations concerning gender influence for women’s career progression. The methodology implemented in this investigation is qualitative; 24 in-depth interviews (12 men and 12 women) have been carried out with professionals from different executive positions in both football clubs and organizations.
Findings
The gender approach improves current knowledge about women’s roles in the football industry. The exploratory analysis of the results shows that although the #MeToo phenomenon is relatively known it has had an indirect impact in Spanish football, where its consequences have not been as visible as in other sectors.
Originality/value
The paper provides an exploratory approach by analysing the effects of the #MeToo movement in the football sector, an area where almost no previous research has been done. Also, it presents the main factors that influence women’s professional careers in this sector and the significance of the recent #MeToo phenomenon in the football industry.