Search results

This paper aims to find an approach that achieves constant output power and transfer efficiency in an open space, such as charging pads.

In this study, a topology of the five-coil system including two transmitting coils is presented. Also, in a fixed-frequency mode and an open space, this study focuses on the two transmitting coils to achieve the uniform magnetic field and ultimately, attain the constant output power and transfer efficiency.

In a fixed-frequency mode and an open space, the constant output power and transfer efficiency is then achieved in experiments by inserting the relay loop into the uniform magnetic field.

An approach that achieves constant output power and transfer efficiency in an open space. The topology of the five-coil magnetically coupled resonant-wireless power transfer (MCR-WPT) system shows prospective value for various applications, which could be used at designing of wireless battery charger dedicated for cars or mobile phones.

By comparing the simulation and experimental results, the topology can be optimized in the transmission performance by itself. By doing so, the constant output power and transfer ef?ciency are achieved in the constant frequency mode.

The purpose of this paper is to study the wireless power transfer (WPT) system that always achieves the maximum output power at a fixed angular frequency using the dynamic impedance compensation and also the maximum transfer efficiency.

An efficient topology of the WPT system is proposed which states that the functions of the relay are transformed into the functions of the compensator in the three-coil WPT system.

Increasing the ratio of the frequency detuning factor of the compensator relative to the frequency detuning factor of the compensator also causes the curves of the normalized output power and the transfer efficiency to move toward the high frequency direction.

The scheme of the dynamic compensation for the WPT using a compensator is convenient to obtain the dynamic impedance compensation by adding or removing the capacitances or inductances from the compensator.

The functions of the relay are transformed into the functions of the compensator in the three-coil WPT system.

Tourism is a labor-intensive sector with extensive links to other industries and plays a vital role in creating employment. This study aims to propose a new framework to analyze the intrinsic structure of the employment effects of tourism-related sectors and their drivers.

This study uses input–output and structural decomposition analysis (IO-SDA) to quantify the employment effects of tourism-related sectors and their driving mechanisms based on China’s I-O tables of 2002, 2007, 2012 and 2017.

The results show a declining trend in the intensity of direct or indirect employment effects in tourism-related sectors, indicating a decreasing number of jobs directly or indirectly required to create a unit of tourism output. Among tourism-related sectors, catering has the highest intensity of indirect employment effects over the study period. Catering stimulates the indirect employment of agriculture, forestry, animal husbandry, fishery and food and tobacco manufacturing. The decomposition analysis reveals that final demand is the largest contributor to the increase in tourism employment, while technological progress shifts from an employment-creation effect in 2002–2012 to an employment-destruction effect in 2012–2017.

This study proposes a new analytical framework to investigate the structural proportional relationship between the direct and indirect employment effects of various tourism-related sectors and their dynamic changes. Doing so, it provides valuable references for policymakers to promote tourism employment.

旅游相关部门就业效应的驱动因素：以中国为例

摘要

旅游业是一个劳动密集型部门, 与其他国民经济部门有着广泛的联系, 这在创造就业方面发挥着重要作用。本研究旨在建立一个框架, 分析旅游相关部门就业效应的内在结构及其驱动因素。

本研究基于中国2002年、2007年、2012年和2017年的投入产出表, 引入投入产出和结构分解分析（IO-SDA）法量化了旅游相关行业的就业效应及其变化的驱动机制。

旅游相关部门的直接或间接就业强度呈下降趋势, 可见创造一个单位的旅游产出所需的直接或间接工作数量在减少。在旅游相关部门中, 餐饮部门在研究期内的间接就业效应强度最高, 主要带动了农、林、牧、渔业和食品及烟草制造业的间接就业。旅游就业效应变动的驱动因素中, 最终需求是旅游就业效应增加的最大贡献者, 技术效应从2002-2012年期间的就业创造效应转变为2012-2017年期间的就业破坏效应。

本研究建立了一个全新的分析框架, 可以揭示各个旅游相关部门的直接和间接就业效应之间的结构比例关系及其动态变化。对旅游就业效应的驱动因素分析可以为政策制定者提供针对性的建议, 以促进旅游就业。

Factores que impulsan los efectos del empleo en los sectores relacionados con el turismo: El caso de China continental

Resumen

El turismo es un sector intensivo en mano de obra con amplios vínculos con otras industrias y desempeña un papel vital en la creación de empleo. Este estudio propone un nuevo marco para analizar la estructura intrínseca de los efectos en el empleo de los sectores relacionados con el turismo y sus impulsores.

Este estudio utiliza el análisis de entrada-salida (input-output) y de descomposición estructural (structural decomposition) (IO-SDA) para cuantificar los efectos sobre el empleo en los sectores relacionados con el turismo y sus mecanismos impulsores, basándose en las tablas input-output de China de 2002, 2007, 2012 y 2017.

Los resultados muestran una tendencia a la baja en la intensidad de los efectos directos o indirectos del empleo en los sectores relacionados con el turismo, lo que indica un número cada vez menor de puestos de trabajo directos o indirectos necesarios para crear una unidad de producción turística. Entre los sectores relacionados con el turismo, la restauración tiene la mayor intensidad de efectos indirectos sobre el empleo durante el periodo de estudio. La restauración estimula el empleo indirecto de la agricultura, la silvicultura, la ganadería, la pesca y la fabricación de alimentos y tabaco. El análisis de descomposición revela que la demanda final es la que más contribuye al aumento del empleo turístico, mientras que el progreso tecnológico pasa de ser un efecto de creación de empleo en 2002-2012 a un efecto de destrucción de empleo en 2012-2017.

Este estudio propone un nuevo marco analítico para investigar la relación estructural proporcional entre los efectos directos e indirectos del empleo de varios sectores relacionados con el turismo y sus cambios dinámicos. De este modo, proporciona valiosas referencias para que los responsables políticos promuevan el empleo en el sector turístico.

The inclusion of esports as an official event in the Hangzhou Asian Games is an important step towards the institutionalisation of esports. The significance of this event marks that Asia once again takes a lead in the global esportisation. This chapter investigates a series of history events in the inclusion process of esports into the comprehensive Games in Asia using process sociology and actor network theory (ANT). This study will analyse the type characteristics of esports events in Hangzhou Asian Games, whilst examining how key stakeholders' interact and balance in the network composed of international sports organisations, host of the event, emerging esports organisations and esports game companies. The chapter also examines the functions of global game industrial economic geography, local cultural politics, esports geopolitics and Olympic values in esports sportization, aiming to reveal the implications of esports inclusion in the Asian Games on the debate of whether esports meets the criteria to be classified as a ‘sport’ and its enlightenment of digital strategy to the inclusion esports in the Olympics.

Herringbone groove thrust bearings are typically used in high-speed, light-load applications, such as spindle motors for hard disk drives. In the past researches, the effect of shaft misalignment was little considered. This study aims to reveal effects of shaft misalignment on the microscopic flow regime in the water-lubricated herringbone groove thrust bearing.

The liquid film in a thrust herringbone groove bearing was investigated by computational fluid dynamics. The effects of micro-grooves on the flow field were carefully explored. Two-dimensional liquid films at four different sites were examined for obtaining the rich flow field properties.

The distributions of pressure, temperature and water vapor volume fraction were obtained, the micro hydrodynamic effects were formed by the herringbone grooves and the effects of the shaft misalignment on lubrication and sealing performance could be found.

The influence of misalignment on the herringbone groove thrust bearing performance was investigated in detail. The obtained results could give the reference guideline for the bearing design.

The purpose of this paper is to improve the overall heat transfer performance and the temperature uniformity of the heat sink and to explore the effects of the jet Reynolds number and the nanoparticle volume fraction of the nanofluids on the flow and heat transfer performance.

A heat sink with discontinuous arc protrusions in the wall jet region is proposed for confined slot jet impingement. A sloping upper cover plate is added to improve the heat transfer effect in this area. An Al₂O₃–water nanofluid is selected as the working fluid of the jet for better heat transfer. The Standard k-e turbulence model is used for numerical calculation. The key structural parameters of the heat sink are optimized by the response surface method and a genetic algorithm. The effects of the jet Reynolds number (Re) and the nanofluid concentration (ϕ) on the flow and heat transfer performance of the optimized heat sink are investigated.

The average Nusselt number of the optimal heat sink is 8.2% higher and the friction resistance is 5.9% lower than that of the initial flat plate heat sink when ϕ = 0.02 and Re = 8,000. The discontinuous arc protrusions and the sloping upper cover plate substantially enhance the heat transfer in the later stage of jet development, improving the temperature uniformity of the heat sink. The maximum temperature difference of the optimal heat sink is 28.1% lower than that of the flat plate heat sink at the same nozzle height. As the jet Reynolds number and the nanofluid particle concentration increase, the Nusselt number of the optimized heat sink and the friction coefficients increase, resulting in a decrease in the evaluation coefficient. However, the overall temperature uniformity of the heat sink is improved under all conditions.

The novel heat sink structure provides a new way to enhance the heat transfer and temperature uniformity of confined slot jet impingement. The flow and heat transfer performance of the heat sink impinged by confined slot jet of nanofluids are obtained. The combination of response surface method and genetic algorithm can be applied to the multi-objective optimization of heat resistance and flow resistance of heat sink.

The purpose of this paper is to achieve one garment with multiple uses, reduce waste and increase the fun of clothing design.

Through the comparison of the structural design of windbreaker with the structural design of suit and other coats, find out the similarities and differences between them in the structure then provide a reliable theoretical basis for the combination and transformation of the two; and then start with the structural theory of men's windbreaker, from the detail structure and the structure. The optimization design of the overall structure, the application of mathematical theory to establish a regular structure design method, so that it can be split through the zipper combination into men's suits or other coats. Finally, from the perspective of technology, the functional transformation from men's windbreaker to men's casual suit and other coats is completed in terms of style, structure and technology.

Through reasonable clothing structure design and invisible zipper layout, one type of clothing can be used as multiple types of clothing.

A new fashion design method is proposed to minimize the waste of fashion design process.

The purpose of this paper is to obtain the reachable domain (RD) for spacecraft with a single normal impulse while considering both time and impulse constraints.

The problem of RD is addressed in an analytical approach by analyzing for either the initial maneuver point or the impulse magnitude being arbitrary. The trajectories are considered lying in the intersection of a plane and an ellipsoid of revolution, whose family can be determined analytically. Moreover, the impulse and time constraints are considered while formulating the problem. The upper bound of impulse magnitude, “high consumption areas” and the change of semi-major axis and eccentricity are discussed.

The equations of RD with a single normal impulse are analytically obtained. The equations of three scenarios are obtained. If normal impulse is too large, the RD cannot be obtained. The change of the semi-major axis and eccentricity with large normal impulse is more obvious. For long-term missions, the change of semi-major axis and eccentricity leaded by multiple normal impulses should be considered.

The RD gives the pre-defined region (all positions accessible) for a spacecraft under a given initial orbit and a normal impulse with certain magnitude.

The RD for spacecraft with normal impulse can be used for non-coplanar orbital transfers, emergency evacuation after failure of rendezvous and docking and collision avoidance.

The purpose of this paper is to propose a relatively simple and rapid method to create a digital human model (DHM) to serve clothing industry.

Human body’s point cloud is divided into hands, foots, head and torso. Then forward modeling method is used to model hands and foots, photo modeling method is used to model head and reverse modeling method is used to model torso. After that, hands, foots, head and torso are integrated together to get a static avatar. Next, virtual skeleton is bound to the avatar. Finally, a lifelike digital human body model is created by the mixed modeling method (MMM).

In allusion to the defect of the three-dimension original data of human body, this paper presented an MMM, with which we can get a realistic digital human body model with accurate body dimensions. The DHM can well meet the needs of fashion industry.

The DHM, which is got by the MMM, can be well applied in the field of virtual try on, virtual fashion design, virtual fashion show and so on.

The originality of the paper lies in the integration of forward modeling, reverse modeling and photo modeling to present a novel method of human body modeling.

Roofing is one of the most dangerous jobs in the construction industry. Due to factors such as lack of planning, training and use of precaution, roofing contractors and workers continuously violate the fall protection standards enforced by the US Occupational Safety and Health Administration. A preferable way to alleviate this situation is automating the process of non-compliance checking of safety standards through measurements conducted in site daily accumulated videos and photos. As a key component, the purpose of this paper is to devise a method to detect roofs in site images that is indispensable for such automation process.

This method represents roof objects through image segmentation and visual feature extraction. The visual features include colour, texture, compactness, contrast and the presence of roof corner. A classification algorithm is selected to use the derived representation for statistical learning and detection.

The experiments led to detection accuracy of 97.50 per cent, with over 15 per cent improvement in comparison to conventional classifiers, signifying the effectiveness of the proposed method.

This study did not test on images of roofs in the following conditions: roofs initially built without apparent appearance (e.g. structural roof framing completed and undergoing the sheathing process) and flat, barrel and dome roofs. From a standpoint of construction safety, while the present work is vital, coupling with semantic representation and analysis is still needed to allow for risk analysis of fall violations on roof sites.

This study is the first to address roof detection in site images. Its findings provide a basis to enable semantic representation of roof site objects of interests (e.g. co-existence and correlation among roof site, roofer, guardrail and personal fall arrest system) that is needed to automate the non-compliance checking of safety standards on roof sites.