Search results

Decision-making problems in emergency plan selection for epidemic prevention and control (EPAC) are generally characterized by risky and uncertainty due to multiple possible emergency states and vagueness of decision information. In the process of emergency plan selection for EPAC, it is necessary to consider several obvious features, i.e. different states of epidemics, dynamic evolvement process of epidemics and decision-makers' (DMs') psychological factors such as risk preference and loss aversion.

In this paper, a novel decision-making method based on cumulative prospect theory (CPT) is proposed to solve emergency plan selection of an epidemic problem, which is generally regarded as hybrid-information multi-attribute decision-making (HI-MADM) problems in major epidemics. Initially, considering the psychological factors of DMs, the expectations of DMs are chosen as reference points to normalize the expectation vectors and decision information with three different formats. Subsequently, the matrix of gains and losses is established according to the reference points. Furthermore, the prospect value of each alternative is obtained and the comprehensive prospect values of alternatives under different states are calculated. Accordingly, the ranking of alternatives can be obtained.

The validity and robustness of the proposed method are demonstrated by a case calculation of emergency plan selection. Meanwhile, sensitivity analysis and comparison analysis with fuzzy similarity to ideal solution (FTOPSIS) method and TODIM (an acronym in Portuguese for interactive and MADM) method illustrate the effectiveness and superiority of the proposed method.

An emergency plan selection method is proposed for EPAC based on CPT, taking into account the psychological factors of DMs.

Highlights

1. This paper proposes a new CPT-based EDM method for EPAC under a major epidemic considering the psychological factorsof DMs, such as risk preference, loss aversion and so on.

2. The authors' work gives approaches of normalization, comparison and distance measurement for dealing with the integration of three hybrid formats of attributes.

3. This article gives some guidance, which contributes to solve the problems of risk-based hybrid multi-attribute EDM.

4. The authors illustrate the advantages of the proposed method by a sensitivity analysis and comparison analysis with existing FTOPSIS method and TODIM method.

This paper proposes a new CPT-based EDM method for EPAC under a major epidemic considering the psychological factorsof DMs, such as risk preference, loss aversion and so on.

The authors' work gives approaches of normalization, comparison and distance measurement for dealing with the integration of three hybrid formats of attributes.

This article gives some guidance, which contributes to solve the problems of risk-based hybrid multi-attribute EDM.

The authors illustrate the advantages of the proposed method by a sensitivity analysis and comparison analysis with existing FTOPSIS method and TODIM method.

In this study, the authors performed a numerical investigation on the heating of a hot cathode with a conical tip by atmospheric arc, taking into account of the two temperature sheath effect for the first time.

The Schottky effect at cathode surface is considered, which is based on the analytic solution of a one-dimensional sheath model. The unified model allows one to predict the cathode-plasma heat transfer.

The total heat flux to cathode surface is smaller than its components’ heat flux due to electron back diffusion is as large as that due to ion flux with the increase of cathode length the total heat transported to the cathode body has an obvious decrease.

It is found that two kinds of solution exist for the cathode with a 140° conical tip; however, only one stable solution exists when the conical angle is reduced to 130°.

Compared to traditional (domestic) e-commerce consumers, cross-border electronic commerce (CBEC) consumers may face greater information asymmetry in the CBEC purchase process. Given this background, however, the literature has paid limited attention to the informational antecedents that influence consumers' perceptions of transaction costs and their CBEC purchase intentions. To fill this gap, this study integrates the elaboration likelihood model (ELM) and transaction cost theory (TCT) to develop a model for exploring how product (website informativeness, product diagnosticity and website interactivity as the central route) and external (country brand, website policy and vendor reputation as the peripheral route) informational antecedents affect consumers’ evaluations of transaction costs in terms of uncertainty and asset specificity and their CBEC purchase intentions.

This study employs a survey approach to validate the model with 766 Generation Z CBEC consumers based on judgment sampling. The partial least squares (PLS) technique is adopted for data analysis.

The results show that all the proposed central and peripheral informational antecedents reduce consumers’ perceptions of uncertainty and asset specificity, which in turn negatively influences their CBEC purchase intentions.

Through this investigation, this study increases our understanding of how product and external informational antecedents affect consumers’ evaluations of transaction costs, which subsequently determine their CBEC purchase decisions. This study offers theoretical contributions to existing CBEC research and has practical implications for CBEC organizations and managers.

In order to effectively promote the deep integration of artificial intelligence and the real economy and empower real enterprises to improve quality and efficiency, this study regards the CEO as a high-end innovation resource and aims to empirically test the impact of scholar-type CEOs on the industrial artificial intelligence (AI) transformation of manufacturing enterprises.

Grounded on the upper echelons theory, this paper preliminarily selects A-share manufacturing listed companies in Shanghai Stock Exchange and Shenzhen Stock Exchange that are affiliated to enterprise groups from 2014 to 2020 as samples. Furthermore, the Logit regression is conducted to analyze the influence of scholar-type CEOs about industrial AI transformation.

The results show that scholar-type CEO plays a significant role in promoting industrial AI transformation. The parent-subsidiary corporations executives' ties positively moderates the impact of scholar-type CEOs on industrial AI transformation. Further, internal control quality plays a partial mediating role between scholar-type CEOs and industrial AI transformation. Compared with private enterprises, scholar-type CEOs play a stronger role in promoting industrial AI transformation of state-owned enterprises.

First, this paper expands the research related to the influencing factors of industrial AI transformation based on upper echelons theory and clarifies the influencing mechanism of scholar-type CEOs affecting industrial AI transformation from the perspective of executives' behavior. Second, this study further enriches the research framework on the economic consequences of scholar-type CEOs and provides a useful supplement to the research literature in the field of upper echelons theory. Third, this paper is not limited to a single enterprise but involves the management practice of resource allocation within the enterprise groups, further clarifies the internal logic of the decision-making of industrial AI transformation of listed companies within the framework of enterprise groups, providing theoretical reference for the scientific design of the governance mechanism of parent-subsidiary companies.

The purpose of this study is to solve the key problem of the residual stress of strip in buckling and deviation during the continuous annealing process (CAP).

Considering the one-to-one correspondence between deformation and residual stress, the strip was divided into multiple elements. To obtain the total deformation of each element, the influence model of some factors on the deformation of steel strip element was established. Then, according to the constitutive equation of residual stress and deformation, and the deformation coordination relation between strip elements, a set of calculation model, which is suitable for residual stress of strip during CAP was established, the model precision was verified by finite element method simulation, and the influences on residual stress of strip were also analyzed.

The weighted calculation of comparison between analytical results and simulation shows that the accuracy of the analytical method is within 10 per cent, which fully meets the requirements.

The different residual stress of steel strip can be displayed quickly and intuitively in the synchronous process segment according to this model, which is of great importance to the prevention of strip buckling and deviation.

This paper aims to propose a suitable atomizing solidification chitosan (CS) gel liquid extrusion molding technology for the three dimensional (3D) printing method, and experiments verify the feasibility of this method.

This paper mainly uses experimental means, combined with theoretical research. The preparation method, solidification forming method and 3D printing method of CS gel solution were studied. The CS gel printing mechanism and printing error sources are analyzed on the basis of the CS gel ink printing results, printing performance with different ratios of components by constructing a gel print prototype, experiments evaluating the CS gel printing technology and the effects of the process parameters on the scaffold formation.

CS printing ink was prepared; the optimal formula was found; the 3 D printing experiment of CS was completed; the optimal printing parameters were obtained; and the reliability of the forming prototype, printing ink and gel printing process was verified, which allowed for the possibility to apply the 3 D printing technology to the manufacturing of a CS gel structure.

This study can provide theoretical and technical support for the potential application of CS 3 D printed gels in tissue engineering.

The purpose of this paper is to develop the linguistic q-rung orthopair fuzzy set (LqROFS) information VIKOR method based on the bi-direction Choquet integral (BDCI), taking into account the correlation between information. The method can enrich the existing studies related to LqROFS information and better solve the problem of MAGDM problem.

Since applying Choquet integral (CI) depict information interaction is a common operation in MAGDM. However, the traditional CI has some limitations. The unidirectional alignment may affect the MAGDM results. Therefore, a LqROFS-VIKOR method based on BDCI is proposed, where BDCI is used to aggregate the decision matrix. Furthermore, it is not reasonable to apply exact numbers to express the similarity between two qualitative data. Then a new method of defining similarity using linguistics is proposed. The similarity is used to calculate attribute weights.

The validity and potential application of MAGMD method with linguistic q-rung orthopair fuzzy information based on BDCI are demonstrated in a numerical examples study.

According to the study of available literature, the current research on LqROFS is incomplete. The existing studies of both similarity and aggregate operators have certain shortcomings. The definition of similarity proposed in this paper is more in line with reality. And compared with the existing methods, the BDCI-based aggregate operator can describe the interaction between information more reasonably. Based on this VIKOR method based on BDCI under the LqROFS environment can better select the alternative.

The novel structures and properties of nanostructure and nanomaterials give people perfect artistic expression of feeling and sense, then the nanoart discipline is developed and is closely related on the nanotechniques. The many achieved novel nanostructures with strong anti-corrosion prepared by the anodization have been reviewed. The paper would raise public awareness of nanotechnology, nanomaterial and their impact on our lives.

Anodization is a very effective and simple technique to form various nanostructures of metal oxide. It includes hard anodization, mild anodization and pulse anodization. Many measures have been introduced anodization process to improve the quality of formed nanostructure and enhance its properties, such as anti-corrosion.

The formation mechanism of anodic aluminum oxide (AAO) by using the mild, hard and pulse anodization has been discussed. The pretexture process and many other measures have been taken in mild and hard anodization to improve the regularity of pore array and greatly accelerate the formation rate of AAO. The pulse anodization has been used to prepare the multilayer Y-branched AAO film, which exhibits steady rich and vivid structure colors and gives a very good artistic expression. Furthermore, many other metal oxide nanostructures such as TiO₂ and CuO have also been fabricated using the anodization techniques.

Various nanostructures of metal oxide prepared by anodization have been reviewed and are itself a perfect artwork in mesoscale. Also, many nanostructures have exhibited steady, rich and vivid structure colors and give people a very good artistic expression.

To analyze the quality of transitional care for patients with COVID-19 at discharge from Brazilian university hospitals.

A cross-sectional descriptive study was carried out in five Brazilian university hospitals between April and December 2021. The sample consisted of 527 participants. Data collection consisted of a sociodemographic questionnaire and the Care Transitions Measure (CTM-15), a care transition assessment instrument, which was translated and validated in Portuguese.

Most participants were patients (n = 369; 70.0%), with primary school completion (n = 218; 43.4%), multiracial (n = 218; 43.5%) and with an income of up to two minimum wages (n = 182; 42.8%). Dimension 1 – management preparation – obtained the highest score (71.2 points, SD = 16.5), while Dimension 4 – care plan – obtained the lowest score (62.2 points, SD = 23.4). Among the participating hospitals, there was a difference in the overall mean with results ranging from 67.0 to 72.9 points.

A satisfactory quality of care transition was found, considering the context of a pandemic. The main weaknesses in the care transitions were related to the care planning after hospital discharge.