Search results

In regarding to operational efficiency and safety improvements, multiple tower crane service scheduling problem is one of the main problems related to tower crane operation but receives limited attention. The current work presents an optimization model for scheduling multiple tower cranes' service with overlapping areas while achieving collision-free between cranes.

The cooperative coevolutionary genetic algorithm (CCGA) was proposed to solve this model. Considering the possible types of cross-tasks, through effectively allocating overlapping area tasks to each crane and then prioritizing the assigned tasks for each crane, the makespan of tower cranes was minimized and the crane collision avoidance was achieved by only allowing one crane entering the overlapping area at one time. A case study of the mega project Daxing International Airport has been investigated to evaluate the performance of the proposed algorithm.

The computational results showed that the CCGA algorithm outperforms two compared algorithms in terms of the optimal makespan and the CPU time. Also, the convergence of CCGA was discussed and compared, which was better than that of traditional genetic algorithm (TGA) for small-sized set (50 tasks) and was almost the same as TGA for large-sized sets.

This paper can provide new perspectives on multiple tower crane service sequencing problem. The proposed model and algorithm can be applied directly to enhance the operational efficiency of tower cranes on construction site.

Utilizing electrical discharge machining (EDM) to process micro-holes in superalloys may lead to the formation of remelting layers and micro-cracks on the machined surface. This work proposes a method of composite processing of EDM and ultrasonic vibration drilling for machining precision micro-holes in complex positions of superalloys.

A six-axis computer numerical control (CNC) machine tool was developed, whose software control system adopted a real-time control architecture that integrates electrical discharge and ultrasonic vibration drilling. Among them, the CNC system software was developed based on Windows + RTX architecture, which could process the real-time processing state received by the hardware terminal and adjust the processing state. Based on the SoC (System on Chip) technology, an architecture for a pulse generator was developed. The circuit of the pulse generator was designed and implemented. Additionally, a composite mechanical system was engineered for both drilling and EDM. Two sets of control boards were designed for the hardware terminal. One set was the EDM discharge control board, which detected the discharge state and provided the pulse waveform for turning on the transistor. The other was a relay control card based on STM32, which could meet the switch between EDM and ultrasonic vibration, and used the Modbus protocol to communicate with the machining control software.

The mechanical structure of the designed composite machine tool can effectively avoid interference between the EDM spindle and the drilling spindle. The removal rate of the remelting layer on 1.5 mm single crystal superalloys after composite processing can reach over 90%. The average processing time per millimeter was 55 s, and the measured inner surface roughness of the hole was less than 1.6 µm, which realized the  micro-hole machining without remelting layer, heat affected zone and micro-cracks in the single crystal superalloy.

The test results proved that the key techniques developed in this paper were suite for micro-hole machining of special materials.

Because of the extensive use of long‐span structures in modern engineering, much attention has been given to the extent to which ground motion phase‐lags affect the internal forces of such structures. In this paper, this problem is studied from the aspect of random seismic analysis, i.e. the random seismic responses of long‐span structures are explored with the phase‐lags of the ground joints of the structures taken into account. The earthquake is regarded as a stationary random process. Formulae for calculating the random responses of the structural displacements and internal forces are derived. Numerical examples are presented which illustrate some basic features of such random response, and also show that the ground motion phase‐lags have considerable effects on structural safety analysis.

A densely distributed network radar system compensates for the disadvantages of sparse radars and poses a significant threat to low-altitude penetration by an unmanned combat aerial vehicle (UCAV). Unlike previous studies, this paper aims to consider radar blind areas and proposes a rapid online method for planning low-altitude penetration paths.

First, the optimization problem coupling digital elevation map (DEM), radar detection probability model and nonholonomic UCAV kinematic model is established. Second, an online solution framework of penetration path planning is constructed. An intervisibility method and map scaling are proposed to generate a detection probability map (DPM). Through completeness and consistency analysis, an adaptive hybrid A* algorithm with fast local replanning strategy is proposed to search a path that takes into account time-consuming, detection probability under nonholonomic constraints. Finally, three scenarios of multiple known, pop-up and vanished static radars are simulated using C++. The computational performance is compared and analyzed.

The results showed that the proposed online method can generate low-detection-probability penetration paths within subseconds.

This paper provides a new online method to plan UCAV penetration trajectory in military and academic contexts.

This study aims to satisfy the thermal management of gallium nitride (GaN) high-electron mobility transistor (HEMT) devices, microchannel-cooling is designed and optimized in this work.

A numerical simulation is performed to analyze the thermal and flow characteristics of microchannels in combination with computational fluid dynamics (CFD) and multi-objective evolutionary algorithm (MOEA) is used to optimize the microchannels parameters. The design variables include width and number of microchannels, and the optimization objectives are to minimize total thermal resistance and pressure drop under constant volumetric flow rate.

In optimization process, a decrease in pressure drop contributes to increase of thermal resistance leading to high junction temperature and vice versa. And the Pareto-optimal front, which is a trade-off curve between optimization objectives, is obtained by MOEA method. Finally, K-means clustering algorithm is carried out on Pareto-optimal front, and three representative points are proposed to verify the accuracy of the model.

Each design variable on the effect of two objectives and distribution of temperature is researched. The relationship between minimum thermal resistance and pressure drop is provided which can give some fundamental direction for microchannels design in GaN HEMT devices cooling.

The purpose of this study is to solve the problem of longer dead-time in the rear bridge leg switches and lower efficiency in the Four-Switch Buck-Boost LLC Resonant Converter.

The paper adopts time-domain analysis to derive the time-domain expression for optimal dead time, analyzing the conditions for achieving soft switching of the transistors. It further explores the relationship between the dead time of the bridge arm switching transistors and the input/output of the converter under different operating conditions. Specifically, the dead time of the upper bridge arm transistors increases with the converter input voltage and decreases with the output current. In contrast, the dead time of the lower bridge arm transistors is independent of the converter output current and decreases with increasing converter input voltage.

By simulating and constructing a 500 W experimental prototype, experimental results indicate that designing the dead time of the switch according to the optimal dead time proposed in this paper significantly improves efficiency when the converter operates from heavy load to full load. When the transformer takes minimum input, maximum input and intermediate bus voltage inputs respectively, its peak efficiency is increased by 0.6%, 1.7% and 1.1%, respectively, compared to the traditional four-switch Buck–Boost LLC resonant converter.

Experimental validation confirms the correctness of the optimal dead time design and analyzes the impact of different operating conditions of the converter on the dead time. This is of significant importance for the rational design of switch dead times and the enhancement of converter efficiency.

The purpose of this paper is to understand the consumption and demand of Chinese citizens for public digital culture, and make suggestions for government-supported public digital culture providers.

Through a questionnaire survey, this study investigates the provision of public digital cultural services (PDCS) from the perspective of consumption and demands.

The results indicate: the Chinese populace as a whole had low expenses on digital cultural services, and had not effectively utilized them to support their own development; significant disparities exist between demographics, particularly between urban and rural residents; the populace were strongly interested in participation in public digital culture, but the services had low actual utilization rates; and the services had been unable to meet the users’ quality-related demands.

The first study to approach the provision of PDCS from the side of consumption and user demand.

The purpose of this paper is to consider three factors, namely, intra-week demand fluctuations, interrelationship between the number of robots and order scheduling and conflicting objectives (i.e. cost minimization and customer satisfaction maximization), to optimize the robot logistics system.

The number of robots and the sequence of delivery orders are first optimized using the heuristic algorithm NSGACoDEM, which is designed using genetic algorithm and composite difference evolution. The superiority of this method is then confirmed by a case study of a four-star grade hotel in South Korea and several comparative experiments.

Two performance metrics reveal the superior performance of the proposed approach compared to other baseline approaches. Results of comparative experiments found that the consideration of three influencing factors in the operation design of a robot logistic system can effectively balance cost and customer satisfaction over the course of a week in hotel operation and optimize robot scheduling flexibility.

The results of this study reveal that numerous factors (e.g. intra-week demand fluctuations) can optimize the performance efficiency of robots. The proposed algorithm can be used by hotels to overcome the influence of intra-week demand fluctuations on robot scheduling flexibility effectively and thereby enhance work efficiency.

The design of a novel algorithm in this study entails enhancing the current robot logistics system. This algorithm can successfully manage cost and customer satisfaction during off-seasons and peak seasons in the hotel industry while offering diversified schemes to various types of hotels.

This study focuses on the CFD numerical simulation and analysis of the vortex stacking problem at the top of the impeller of a high-speed fuel pump, mainly using LCS and entropy production theory to visualize the vortex at the top of the impeller as well as quantitatively analyzing the energy loss caused by the vortex at the top of the impeller. By combining the two methods, the two are well verified with each other that the stacking problem of the vortex at the top of the impeller and the location of the energy loss caused by the vortex are consistent with the vortex location. Such a method can reveal the problem of vortex buildup at the top of the lobe well, and provide a novel guidance idea for improving the performance of high-speed fuel pumps.

Based on CFD numerical simulation and analysis, this study mainly uses LCS and entropy production theory to visualize the top vortex of the impeller. Through the combination of the two methods, the accumulation problem of the top vortex of the impeller and the location of the energy loss caused by the vortex can be well revealed.

(1) The CFD numerical simulation analysis of the high-speed fuel pump is carried out, and the test is conducted to verify the numerical simulation results. The inlet and outlet pressure difference? P is used as the validation index, and the error analysis shows that the error between numerical simulation and test results is within 10%, which meets our requirements. Therefore, we carry out the next analysis with the help of CFD numerical simulation. By analyzing the full working condition simulation, its inlet and outlet differential pressure? P and efficiency? Are evaluated. It is found that its differential pressure decreases with the flow rate and its efficiency reaches its maximum at Qv = 9.87 L/s with a maximum efficiency of 78.32%. (2) We used the LCS in the analysis of vortices at the top of the impeller blades of a high-speed fuel pump. One of the metrics used to describe the LCS in fluid dynamics is the FTLE. The high FTLE region represents the region with the highest and fastest particle trajectory stretching velocity in the fluid flow. We performed a cross-sectional analysis of the FTLE field on the different height surfaces of the impeller on 25% Plane, 50% Plane, and 75% Plane, respectively. And a quarter turn of the rotor rotation was analyzed as a cycle divided into 8 moments. It is found that on 25% Plane, the vortex at the top of the lobe is not obvious, but there are high FTLE values on the shroud surface. On 50% Plane, the lobe top vortex is relatively obvious and the number of vortices is three. The vortex pattern remains stable with the rotating motion of the rotor. At 75% Plane, the lobe top vortex is more visible and its number of vortices increases to about 5 and the vortex morphology is relatively stable. The FTLE ridges visualize the vortex profile. This is a good guide for fluid dynamics analysis. (3) At the same time, we use the entropy production theory to quantitatively analyze the energy loss, and define the entropy production rate Ep. Through the entropy production analysis of the impeller shroud surface and the suction surface of the pressure surface of the blades at eight moments, we find that the areas of high energy loss are mainly concentrated in the leading and trailing edges of the blades as well as in the shroud surface close to the leading edge of the blades, and the value of the entropy production rate is up to 106 W/m3/K. The areas of high energy loss in the leading edge of the blades as well as the trailing edge show a curved arc, and the energy loss is decreasing as it moves away from the shroud surface and closer to the hub surface. The high energy loss areas at the leading and trailing edges of the blades are curved, and the energy loss decreases as they move away from the shroud surface and closer to the hub surface. The energy loss at the pressure surface of the blade is relatively small, about 5 × 105 W/m3/K, which is mainly concentrated near the leading edge of the blade near the shroud surface and the trailing edge of the blade near the hub surface. Such energy loss corresponds to the vortex LCS at the top of the impeller, and the two mirror each other.

This study focuses on the CFD numerical simulation and analysis of the vortex stacking problem at the top of the impeller of a high-speed fuel pump, mainly using LCS and entropy production theory to visualize the vortex at the top of the impeller as well as quantitatively analyzing the energy loss caused by the vortex at the top of the impeller. By combining the two methods, the two are well verified with each other that the stacking problem of the vortex at the top of the impeller and the location of the energy loss caused by the vortex are consistent with the vortex location. Such a method can reveal the problem of vortex buildup at the top of the lobe well, and provide a novel guidance idea for improving the performance of high-speed fuel pumps.

This study conducts a comparative analysis of the diversification effects of China's national carbon market (CEA) and the EU ETS Phase IV (EUA) within major commodity markets.

The study employs the TVP-VAR extension of the spillover index framework to scrutinize the information spillovers among the energy, agriculture, metal, and carbon markets. Subsequently, the study explores practical applications of these findings, emphasizing how investors can harness insights from information spillovers to refine their investment strategies.

First, the CEA provide ample opportunities for portfolio diversification between the energy, agriculture, and metal markets, a desirable feature that the EUA does not possess. Second, a portfolio comprising exclusively energy and carbon assets often exhibits the highest Sharpe ratio. Nevertheless, the inclusion of agricultural and metal commodities in a carbon-oriented portfolio may potentially compromise its performance. Finally, our results underscore the pronounced advantage of minimum spillover portfolios; particularly those that designed minimize net pairwise volatility spillover, in the context of China's national carbon market.

This study addresses the previously unexplored intersection of information spillovers and portfolio diversification in major commodity markets, with an emphasis on the role of CEA.